• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.876-880
• /
• 1999

The surfactant self-diffusion coefficients of mixed micellar solutions of ionic and nonionic surfactants have been measured by the NMR pulsed field gradient spin echo(FT-PGSE) method. In addition, the line widths of $^1H$ NMR signal have been monitored. The system investgated are $C_{12}EO_5/SDS/D_2O$, $C_{12}EO_5/DTAC/D_2O$, and $C_{12}EO_8/SDS/D_2O$. In the sample series, the molar ratios of $D_2O$ to surfactant(ionic+nonionic) were kept constant while the surfactant mixing ratio was varied. For the $C_{12}EO_5$ system, the surfactant self-diffusion coefficient indicates minimum when the surfactant mixing ratio is about 20% ionic surfactant. The observed decrease in self-diffusion coefficients as nonionic surfactant was replaced by ionic surfactant is interpreted to mainly be due to an increased micelle-micelle repulsion. The increase in self-diffusion coefficients occurring at higher fraction of ionic surfactant is shown to be due to a decrease in micelle size. For the $C_{12}EO_8$ system, the effect of the surfactant mixing ratio is much weaker which can be understood by considering the molecular geometry and large headgroup area. The proton NMR line widths correlate well with the self-diffusion coefficients and broadening of the alkyl chain methylene signals is found when the self-diffusion coefficients is low.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.415-421
• /
• 2014

In this paper, we proposed problem and improvement of halftoning using random space filling curve. Random space filling curve is developed as a solution for shortcoming which space filling curve has self-similarity. It is used to reduce regular pattern can be occurred in constant brightness area in order that randomness apply to scanning path. But there is a problem that some area along scanning path can show too bright result in halftoning using random space filling curve. In this paper, we analyzed cause of problem and proposed single pixel error diffusion as a solution method. This method can avoid over-accumulated error and show better result in halftoning.

• The Journal of Korean Physical Therapy
• /
• v.22 no.5
• /
• pp.109-115
• /
• 2010

Purpose: This study was to delineate the structural change of neural pathway after sequential motor learning using diffusion tensor imaging (DTI). Methods: The participants were 16 healthy subjects, which were divided by training (n=8) and control (n=8) group. The task for the training was the Serial Reaction Time Task (SRTT) which was designed by Superlab program. When the 'asterisk' shows up in the 4 partition spaces on the monitor, the subject presses the correct response button as soon as possible. The training group participated in the training program of motor learning with SRTT composed of 24 digits pattern in one hour per daily through 10 days during 2 weeks. Results: In the behavioral results the training group showed significant changes in the increase of response number and the reduction of response time than those of the control group. There was significant difference in the left inferior frontal area in the fractional anisotropy (FA) map of the training group in DTI analysis. Conclusion: Motor sequential learning as like SRTT may be needed to the learning of language and visuospatial processing and may be induced for the experience-dependent structural plasticity during short period.

• Journal of Digital Contents Society
• /
• v.19 no.8
• /
• pp.1453-1462
• /
• 2018

In this paper, we look photographes of costumes and composed them as image files by extracting only costume part of the photograph excluding the background part. And we calculated representative color value to implement smart costume coordination program using complementary colors corresponding to representative color values in the costume area. And then, We have solved the problem of over-segmentation caused by extracting the costumes area by applying an anisotropic diffusion algorithm that can remove the noise of the image and flatten the gradient. In order to satisfy users' various needs, we plan to add not only complementary colors coordination but also more various color scheme.

• Annals of Clinical Neurophysiology
• /
• v.8 no.2
• /
• pp.186-189
• /
• 2006

A 69 year-old woman was admitted with sudden left facial weakness. She had no other neurologic deficit, except for left peripheral type facial palsy. She had a presumptive diagnosis of Bell's palsy. The blink test was indicative of left facial neuropathy due to left medullary lesion. Diffusion weighted (DWI) brain MRI demonstrated high signal signal lesion in left dorsolateral ponto-medullary junction. Apperant diffusion coefficient (ADC) brain MRI showed low signal lesion in the same area. We present an unusual case of ipsilateral peripheral facial palsy in dosolateral ponto-medullary infarction without other neurologic deficits.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.6
• /
• pp.437-452
• /
• 2002

The Metropolitan Tracer Experiment (METREX) was performed over the Washington, D.C. area using two inert, non-deposition perfluorocarbon gases for over 1 year period (November 1983∼December 1984). Two perfluorocarbon gas tracers (PDCH, PMCH) were released simultaneously at intervals of every 36 hours for 6 hours, regardless of the meteorological conditions in metropolitan area. Samples were collected continuously for 8 hours at a central downtown and two adjacent suburban locations. Monthly air samples were collected at 93 sites across the whole region (at urban, suburban, and rural locations). The purpose of this study is to simulate INPUFF and ISCST model using METREX data, and to compare calculated and observed concentrations. In the case of INPUFF simulation, two meteorological input data were used. One is result data from wind field model which was calculated by diagnostic wind model (DWM), the other is meteorological data observed at single station. Here, three kinds of model calculation were performed during April and July 1984; they include (1) INPUFF model using DWM data (2) INPUFF model using single meteorological data (3) ISCST model. The monthly average concentration data were used for statistic analysis and to draw their horizontal distribution patterns. Eight-hour-averaged concentration was used to describe movement of puff during the episode period. The results showed that the concentrations calculated by puff model (INPUFF) were better than plume model (ISCST). In the case of puff model (INPUFF), a model run using wind field data produced better results than that derived by single meteorological data.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.39-43
• /
• 2003

Chloride ions are considered to be the major cause of steel corrosion in concrete structures exposed to seashore environments and also permeation of chloride is controlled by chloride diffusion. Therefore, the study on chloride diffusion of concrete have been done so far by many researchers. It is reported that coating material as surface covering material is effect about deterioration of salt damage and carbonation, therefore these materials are important in durability of concrete structure. In this study, corrosion characteristics of reinforcement concrete according to types of surface covering material were evaluated by water-cement ratio, chloride penetration by age on the corrosion area rate and mass decrement of reinforcement. And it is considered that the result of this study on application of the corrosion characteristics of reinforcements under salt damage environmental will be suggested as fundamental data of control performance of salt damage. It is performed that comparison and examination of control performance of salt damage by the corrosion characteristics under salt damage environmental.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.295-295
• /
• 2013

Supercapacitors with higher energy and power density are attracting growing attention for their wide range of potential applications such as portable electronic equipments, hybrid vehicle and cellular devices. In various classes of materials for supercapacitors, the redox pseudocapacitive materials such as conducting polymers and metal oxides have been most widely studied recently. The nanostructuring of the electrode surface has also been focused on since it can provide large surface area and consequently easy diffusion of ions in the capacitors. Among the active materials, in this work, we have used polyaniline (PANi) and manganese oxide ($MnO_2$). PANi is one of the promising electrode and active materials due to its desirable properties such as high electrochemical activity, high doping level and stability. $MnO_2$ is also widely studied material for supercapacitors since it is relatively cheap and environmentally friendly. In this work, we fabricated PANi hollow nanospheres by polymerizing aniline monomers on the polystyrene (PS) nanospheres and then dissolving the inner PS spheres. This nanostructuring of the PANi surface can provide large surface area and hence easy diffusion of electrolyte ions. We also incorporated $MnO_2$ nanoparticles into the PANi hollow nanospheres and investigated its electrochemical properties. It is expected that the combination of these two active materials with slightly different working potential windows show synergetic effects such as broader working potential range and enhanced specific capacitance.

• Journal of Environmental Science International
• /
• v.20 no.11
• /
• pp.1403-1415
• /
• 2011

To understand the transport of anchovy egg-larvae, an integrated model consisting of a hydrodynamic model and a three-dimensional Lagrangian diffusion model was used for the anchovy Engraulis japornicus egg-larvae trace. Fist, in order to determine the circulation characteristics of the South Sea of Korea, residual flow according to tide, density and wind effect was investigated. In offshore regions, tide-induced residual current tends to flow eastward during the spring tide and westward during the neap tide. Residual flow is irregular due to the bottom topography in the coastal area. No special tendency was apparent in the open sea. Especially, the flow in the offshore regions showed results similar to that of the Tsushima Warm Current. The transport of anchovy egg-larvae is decided the physical properties of sea water. It is estimated that anchovy eggs spawned near the Jeju Island travels offshore, rather than to coastal areas, and grow in the front area between the coastal sea and offshore regions.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.246-251
• /
• 2020

Dimethyl Ether(DME) engine use a highly efficient alternative fuel having a great quantity of oxygen and has a advantage no polluting PM gas. The existing DME fuel cam material is a highly expensive carbide alloy, and it is difficult to take a price advantage. Therefore the study of replacing body area with inexpensive steel material excluding piston shoe and contact area which demands high characteristics is needed. The development of WC-Ni base carbide alloy optimal bonding composition technique was accomplished in this study. To check out the influence of bonding temperature and time, bonding characteristics of sintering temperature was experimented. The hardness of specimen and bonding rate were measured using ultrasound equipment. The bonding state of each condition was excellent, and the thickness of mid-layer, temperature and maintaining time were measured. The mid-layer thickness according to bonding temperature and maintaining time were observed with optical microscope. We analyzed the micro-structural analysis, formation of bonding specimen, wafer fabrication and fuel cam abrasion test. Throughout this study, we confirmed that the fuel cam for DME engine which demands high durability against velocity and pressure is excellent.