• 국토계획
• /
• 제53권7호
• /
• pp.23-37
• /
• 2018

In recent years, there has been a proliferation of commercial uses in the area where Gentrification occurs. In order to cope with such a diffusion phenomenon, it is necessary to derive the diffusion area accurately. Gentrification has a feature that occurs locally in a short time. Therefore, this study used the space-time pattern analysis to derive the diffusion area of commercial uses in Bukchon, a typical gentrified area in Seoul. Among the space-time pattern analysis, space time permutation statistics used in this study can derive the convergence phenomenon of time and space in a particular case with only the location information. The results confirmed that there has been three proliferation area in Bukchon, one started in 2007, other in 2013 and the other in 2014. In the earliest area, independent shops were the most popular, and the majority of them were restaurants. However in latter areas, there has been more chain stores and clothing stores than earlier area. The findings of this study indicate that space time pattern analysis can be used as a tool to analyze the proliferation by gentrification because it can derive accurate location and timing of the diffusion.

• 농촌지도와개발
• /
• 제16권1호
• /
• pp.201-235
• /
• 2009

This study analyzed the demographic characteristics, strengths and weaknesses related to information acquisition of local innovation diffusion types. This study use ordered probit model to find strengths and weaknesses of innovation diffusion type in rural area. The individual characteristics of 'formal extension type', 'situational reaction diffusion type', 'agriculturist connection type', and 'systematic approach type', all differentiated according to innovation diffusion type, were analyzed. Following Choi & Choe(2008), immediacy, accessibility, referability, applicability, and satisfaction were the highest in the situational reaction diffusion type, systematic approach type, formal extension type, and farmers connection type, in the order. And there existed organic contexts among individual characteristics. So this study tried to analyze strengths and weaknesses of innovation diffusion type with a focus on immediacy, which emerged as the most important variable in the process of interpreting innovation diffusion. And the strengths and weaknesses of each innovation diffusion type were presented.

• 한국토양환경학회지
• /
• 제1권2호
• /
• pp.83-90
• /
• 1996

토양내에서의 가스나 증기상의 오염물질의 이동은 여러 가지 현상에 의해서 일어나고 있으나 농도차에 의해서 일어나는 확산이 가장 중요하다. 그런데 토양내에서의 확산은 토양 입자들로 인한 확산 부피의 감소, 또 확산경로의 불규칙성, 확산 경로에 있어서 단면적의 변화 등으로 인해 대기중에서 일어나는 확산과는 다른 면을 보인다. 본 논문에서는 이러한 현상을 설명하기 위하여 흔히 사용되는 굴절계수(toruosity), 유효확산계수(effective diffusion coefficient)의 서로 다른 그러나 같은 이름으로 사용되는 많은 정의들과 다양한 수학적 모델들에 대한 비교 검토가 이루어졌다. 굴절계수나 유효확산계수를 사용할 때는 각각의 경우 정의와 각 식의 특징에 대하여 세밀한 검토와 주의가 행하여져야 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권2호
• /
• pp.18-27
• /
• 2022

본 연구에서는 해양 폭로 조건과 배합 사항을 고려하여 GGBFS 콘크리트의 시간의존적 염화물 확산 거동을 분석하였다. 사용 콘크리트 배합은 3 수준의 물-결합재 비 및 고로슬래그 미분말 치환률을 고려한 콘크리트 배합이며 노출 조건으로는 침지대, 간만대, 비말대 총 3 수준을 고려하여 옥외 폭로 시험을 수행하였다. 겉보기 염화물 확산계수 평가 결과, 고로슬래그 미분말의 치환률이 증가할수록 노출 기간 730일(2년)을 기준으로 평가한 확산계수의 감소율이 감소하였다. 또한 노출 조건에 따른 확산거동을 평가한 결과, 침지대, 간만대, 비말대 순으로 확산계수가 평가되었다. 비말대에서는 해수의 건습 반복으로 인해 비교적 높은 확산계수가 평가되었다. 본 연구에서는 고로슬래그 미분말 치환률이 겉보기 염화물 확산계수 감소 거동에 미치는 영향을 노출 조건 및 기간을 고려하여 분석하였다. 확산계수를 출력 값으로, 고로슬래그를 입력 값으로 설정한 선형 회귀분석을 수행하였으며, 노출 기간 730일 이후 고로슬래그 미분말이 확산계수에 미치는 영향이 크게 감소하였다. OPC 콘크리트라 할지라도 730일 이후 GGBFS 콘크리트 만큼 낮은 확산계수를 나타냈기 때문이며 고로슬래그 미분말의 사용을 통해 730일 이전에 뛰어난 초기 염해 내구성능 확보가 가능하다고 사료된다.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.29-33
• /
• 2011

Film growth rate and composition variation are numerically analyzed during the selective area growth of InGaN on the GaN triangular stripe microfacet in this study. Both the vapor phase diffusion and the surface diffusion are considered to determine the In composition on the InGaN surface. To obtain the In composition on the surface, flux of In atoms due to the surface diffusion is added to the concentration determined from the Laplace equation which is governing the gas phase diffusion. The solution model is validated by comparing the growth rates from the analyses to the experimental results of GaN and InN films. The In composition and resulting wave length are increased when the surface diffusion is considered. The In content is also increased according to the increasing mask width. The effect of mask width to the In content and wave length is increasing in the case of a small open region.

• Journal of Welding and Joining
• /
• 제15권6호
• /
• pp.32-40
• /
• 1997

Solid state diffusion bonding is the joining process performed by creep and diffusion, which is accelerated by heating below melting temperature and proper pressing, in vacuum or shielding gas atmosphere. By this process we can obtain sufficient joint which can't be expected from the fusion welding. For Ti-6Al-4V alloy, the optimum solid state diffusion bonding condition and mechanical properties of the joint were found, and micro void morphology at bond interface was observed by SEM. The results of tensile test showed sufficient joint, whose mechanical properties are similar to that of base metal. 850$^{\circ}$C, 3MPa is considered as the optimum bonding condition. Void morphology at interface is long and flat at the initial stage. As the percentage of bonded area increases, however, small and round voids are found. Variation of void shape can be explained as follows. As for the void shrinkage mechanism, at the initial stage, power law creep is the dominant, but diffusion mechanism is dominant when the percentage of bonded area is increased.

• 한국대기환경학회지
• /
• 제12권1호
• /
• pp.29-41
• /
• 1996

The two-stage numerical model was used to study the relation between three-dimensional local wind model, advection/diffusion model of random walk method and second moment method on Pusan coastal area. The first stage is three dimensional time-dependent local wind model which gives the wind field and vertical dirrusion coefficient. The second stage is advection/diffusion model which uses the results of the first stage as input data. First, wind fields on Pusan coastal area for none synoptic scale wind showed typical land and sea breeze circulation, and convergence zone occured at 1200LST in northern of domain, in succession, moved northward of domain. Emissions from Sinpyeong industrial district were trasnported toward the inland by sea breeze during daytime, and reached the end part of domain about 1800LST. During nighttime, emissions return to sea by land breeze and vertical diffusion also contributes to upward transport. In order to use this model for forecast of air pollution concentration on the Pusan coastal area, it is necessary that computed value must be compared with measured value and wind fields model must also be dealt in detail.

• 한국농공학회논문집
• /
• 제53권1호
• /
• pp.9-15
• /
• 2011

Highly pathogenic avian influenza could not be identified visually. It takes time to identify the symptoms by its incubation period. Without taking a quick step, the diffusion area of HPAI has dramatically increased, the extent of damage becomes bigger. In network research, the algorithm of finding the central node on the network applied to various diffusion of epidemic problems, was used in control system of tracing the diffusion path, blocking central nodes. This study tried to make the diffusion of HPAI network model for the crowded farms area, and reduce the diffusion rate to control the high-risk farms.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.51-59
• /
• 2005

Co-flow laminar diffusion flames' temperature has been studied experimentally for ethylene$(C_2H_4)$ using a co-flow burner in order to investigate the characteristics of diffusion flame's temperature distribution. The temperature distributions in the flame were measured by rapid insertion of a R-type thermocouple. The measurement area was divided into three zones. 1st area was expect to created PAH zone, Il nd area was expect to form soot zone, which is known to generate most soot volume fraction, and III rd area was expect to from soot oxidization zone. Also The temperature along the flame y-axis as a fuel quantity was measured. As a results, we have measured temperature neglecting the effect of soot particles attached to the thermocouple junction, which is close to the nozzle and upstream zone has a unstable flow in co-flow diffusion flame and acquires that the flame y-axis temperature has a uniform temperature in the generated soot volume fraction zone(II nd).

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.516-519
• /
• 2009

In the printer and the facsimile communication, digital halftoning is extremely important technologies. Error diffusion method is applied easy for color image halftoning. But the problem in error diffusion method is that a quite unrelated color has been generated though it is necessary to express the area of the grayscale in the black and white when the image that there is an area of the grayscale on a part of the color image is processed. The halftoning was assumed to be a combinational optimization problem to solve this problem, and the method of using SA (Simulated Annealing) was proposed. However, new problem existed because the processing time was a great amount compared with error diffusion method. Then, we propose the new error diffusion method.