• KIEAE Journal
• /
• 제7권1호
• /
• pp.73-80
• /
• 2007

This paper aims to develop the diffused reflection material in order to reduce the solar absorption coefficient, and to compare the thermal properties with the different roof structure system; one is using the diffused reflection material applied the upper side of the rigid sheet waterproof system and the other is using the conventional up-side down waterproof system on the roof. For this purpose two experimental test boxes were made of same iso-panel wall and floor with different roof system. The experiment was carried out under these process; measure the surface temperature exposed solar radiation of the variation of the reflection materials(cement paste, silica, galvanized steel and titanium dioxide(TiO2)), measure and analyze the variation of the temperature distribution of the each roof system and indoor air in order to evaluate the thermal properties according to the different roof system. The result shows clearly that using the titanium dioxide(TiO2) might be more effective to reduce the solar insolation.

• 한국음향학회지
• /
• 제22권1호
• /
• pp.7-13
• /
• 2003

컴퓨터에 의한 실내음향 예측에 있어 확산반사의 고려는 매우 중요한 요소의 하나로 간주된다. 지난 수년동안 음선추적법과 빔추적법에서 확산반사를 고려하기 위한 방안들이 활발하게 연구되었으나 경면반사를 근본으로 하는 영상법에서는 아직 충분한 연구가 이루어지지 않고 있다. 부분적으로 확산성을 갖는 반사면에서의 음향에너지 반사는 확산반사와 경면반사의 형태로 나누어 볼 수 있으며 반사를 거듭함에 따라 확산-확산, 확산-경면, 경면-확산, 경면-경면의 형태로 반사에너지의 전환이 이루어진다. 본 연구에서는 실내의 벽면을 부분적으로 확산반사의 특성을 갖는 반사면으로 모델링하여 경면반사음은 기존의 영상법으로 계산하고 확산반사음은 라디오시티법을 적용하여 산출하는 확장라디오시티법을 도입하였다. 본 논문에서는 확장라디오시티법의 개념과 이에 따른 고차형태계수의 계산법을 제시하고 고차형태계수가 실내음향 시뮬레이션의 결과에 미치는 영향 등을 분석해 보았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.11-12
• /
• 2009

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.90-93
• /
• 2004

In this work, we have used different techniques for the surface passivation: conventional thermal oxidation (CTO), rapid thermal oxidation (RTO), and plasma-enhanced chemical vapour deposition (PECVD). The surface passivation qualities of eight different single and combined double layer have been investigated both on the phosphorus non-diffused p-type FZ silicon and on phosphorus diffused emitter of 100 ${\Omega}/Sq$ and 40 ${\Omega}/Sq$. In the single layer, silicon dioxide $(SiO_2)$ passivates good on the emitter while silicon nitride (SiN) passivates better than on the non-diffused surface. In the double layers, CTO/SiN1 passivates very well both on non-diffused surface on the emitter. However, RTO/SiN1 and RTO/SiN2 stacks are more suitable for surface passivation in solar cells caused by a relatively good passivation qualities and the low optical reflection. Applying these stacks in solar cells we achieved 18.5 % and 18.8 % on 0.5 ${\Omega}$ cm FZ-Si with planar and textured front surface, respectively. The excellent open circuit voltage $(V_{oc})$ of 675.6 mV is obtained the planar cell with RTO/SiN stack.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.51-58
• /
• 1998

Generally pigment differs from dye stuff because it cannot be melted in water but also because it is stable physically and chemically. In this study you will discover the function, properties and effects of Micai-TiO$_2$-SiO$_2$pigment as abase material pigment. But until now used Mica of the base material is about 7-l5${\mu}{\textrm}{m}$ with an average diameters of 15${\mu}{\textrm}{m}$. A new characteristic superficial pigment was obtained from covering the TiO$_2$ and SiO$_2$ with the adsorption result of isoelectric point of a Mica flake, TiO$_2$ and SiO$_2$In the composition reaction study of adsorption was done as well as the physical characteristics of the superficial texture of the obtained material. L,a,b of color change as oil was absorbed, optical nature and change of reflection according to direct and diffused reflection. In the composition of Mica slurry the best result obtained was in a solution with pH 2.0 to 2.3. Following this result, we can come to the idea that electrical attraction was done during the change of electrical charge of the Mica and TiO$_2$ deposit. Also this pigment shows a big scale between the direct reflection and diffused reflection light. Using this characteristic in cosmetic, it was obtained a natural but a contrast between light and shadow making possible a sculptured make-up. Color change due to oil adsorption was insignificant which improved the last of make up.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.183-188
• /
• 2003

This study is to make the fundamentals of sound quality evaluation in regard of acoustical characteristics of passenger compartment. The deviation of frequency response function level within audible frequency is evaluated at receiving point in the research of room acoustics. In this study, frequency response function is the one between speaker and driver's ear positions. The positions of driver and audio speakers are optimized by analysis of acoustic mode of acoustic cavity. The main reflection planes are determined by analysis sound ray path diffused at optimized speaker positions. Finally, designer selects acoustical material by analysis of absorption effect of acoustical materials on the main reflection planes in order to avoid to distortion and fluctuation of frequency response function..

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.89-91
• /
• 2007

In order to decrease the degradation of phosphor on anode, many kinds of methods try to do coating of phosphor powders and AI metal layer of anode phosphor, In case of direct coating of phosphor powder, thin and uniform coating process are difficult to cover homogeneous in the surface of phosphor powders and given rise to decrease the brightness, Anti-reflection-layer(ARC) with $TiO_2$, $Al_2O_3$, $Y_2O_3$ showed 103[%] the enhancement of brightness in comparable with normal phosphor layer.

• 한국초등과학교육학회지:초등과학교육
• /
• 제32권4호
• /
• pp.527-534
• /
• 2013

This study investigated elementary school teachers' understanding of the image formation by converging lens, pinholes camera, mirror and water. In each case teachers were asked to draw the ray diagram to indicate the position of the image. Teachers' ray diagrams were analyzed in accordance with the scientific process of image formation. Results of analysis showed that teacher's conceptions were classified into five levels for each situation. And most of the teachers were in level 3 and level 4 in each case. Because they had difficulties in the appling scientific conception(propagating path of light, diffused reflection from each object point, role of the eye, ray tracing) to finding location of image. Also most of teachers didn't know how to apply the law of reflection and refraction to each situation. The study finally discussed the teacher training program of the optical image.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.600-600
• /
• 2012

실리콘 이종접합 태양전지는 diffused dopant를 이용하여 high conductivity의 emitter를 가지는 기존의 crystalline silicon 태양전지와는 다르게 a-Si:H를 이용한 low conductivity emitter 때문에 TCO를 front electrode 및 anti-reflection layer로 사용한다. 하지만 TCO와 emitter사이의 work function mismatch에 의한 band-offset이 발생하고 photo-generation된 carrier의 injection을 막아 효율 상승을 제한하게 된다. 본 연구는 산소 반응성 스퍼터링을 통한 front TCO의 일함수 변경과 이에 따른 TCO와 emitter 계면에 존재하는 band-offset 변화에 대하여 분석하였다. 특히 산소 분압에 따른 front TCO의 일함수 변화에 따라 개방전압 및 단락전류 변화가 두드러지게 나타났으며, 직렬저항 성분 변화에 따른 충진률 변화에 따른 효율상승을 얻을 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제28권10호
• /
• pp.676-681
• /
• 2015

Recently many studies being carried out to increase the light efficiency of LED. The external quantum efficiency of LED, generally the light efficiency, is determined by the internal quantum efficiency and the light extraction efficiency. The internal quantum efficiency of LED was already reached to more than 90%, but the light extraction efficiency is still insufficient compared with the internal quantum efficiency because the total internal reflection is generated in the interface between the LED chip and air. Thus, we studied about flip chip LED with PSS and performed the optical simulation which find more optimized PSS for flip chip LED to increase the light extraction efficiency. Decreasing of the total internal reflection and effect of diffused reflection according to PSS improved the light extraction efficiency. To get more higher the efficiency, we simulated flip chip with PSS that the parameters are arrangement, edge spacing, radius, height and shape of PSS.