• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.2
• /
• pp.59-63
• /
• 1998

Three different male-sterile cytoplasmic lines and their common maintainer 'Zhenshan 97B' and two elite restorer lines were used to study cytoplasmic effects on agronomic trait manifestation per se under different nitrogen supply levels. The result showed that cytoplasmic effects could be modified by nitrogen environments. The cytoplasmic effect on grain yield under 150 kg N/ha varied depending on crosses, while it was significantly negative in most crosses under both 60 and 330 kg N/ha. The correlation and path-coefficient analyses suggested that it was expected to improve cytoplasmic effects through reducing maximum tillers and increasing the percentage of productive tillers, leading to increased productive tillers and higher yield in hybrid rice by the aid of cultural practice and genetic transformation. This study also revealed that the same cytoplasm in different combinations had differential effect under the same nitrogen environment, indicating that cytoplasmic effect was produced by interaction of nuclear genes with cytoplasm rather than cytoplasm per se. These results indicated the usefulness of evaluating diverse cytoplasmic sources in various nuclear genotypes bred for hybrid rice breeding program. The finding also suggested that negative cytoplasmic effect could be effectively overcome by elite restorer lines through the interaction of nuclear genes with female cytoplasm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.267-272
• /
• 2007

This paper proposes a new approach fur the detection of facial feature regions using the characteristic of DCT(discrete cosine transformation) thatconcentrates the energy of an image into lower frequency coefficients. Since the facial features are pertained to relatively high frequency in a face image, the inverse DCT after removing the DCT's coefficients corresponding to the lower frequencies generates the image where the facial feature regions are emphasized. Thus the facial regions can be easily segmented from the inversed image using any differential operator. In the segmented region, facial features can be found using face template. The proposed algorithm has been tested with the image MIT's CBCL DB and the Yale facedatabase B. The experimental results have shown superior performance under the variations of image size and lighting condition.

• Korean Journal of Materials Research
• /
• v.20 no.9
• /
• pp.472-477
• /
• 2010

$Al_2O_3$ has received wide attention with established use as a catalyst and growing application in structural or functional ceramic materials. On the other hand, the boehmite (AlO(OH)) obtained by sol-gel process has exhibited a decrease in surface area during phase transformation due to a decline in surface active site at high temperature. In this work, $Al_2O_3$-CuO/ZnO (ACZ) and $Al_2O_3$-CuO/CeO (ACC) composite materials were synthesized with aluminum isopropoxide, copper (II) nitrate hemi (pentahydrate), and cerium (III) nitrate hexahydrate or zinc (II) nitrate hexahydrate. Moreover, the Span 80 as the template block copolymer was added to the ACZ/ACC composition to make nano size particles and to keep increasing the surface area. The ACZ/ACC synthesized powders were characterized by Thermogravimetry-Differential Thermal analysis (TG/DTA), X-ray Diffractometer (XRD), Field-Emmision Scanning Electron Microscope (FE-SEM), Bruner-Emmett-Teller (BET) surface analysis and thermal electrical conductivity (ZEM-2:M8/L). An enhancement of surface area with the addition to Span 80 surfactant was observed in the ACZ powders from 105 $m^2$/g to 142 $m^2$/g, and the ACC powders from 103 $m^2$/g to 140 $m^2$/g, respectively.

• Archives of Craniofacial Surgery
• /
• v.18 no.1
• /
• pp.44-45
• /
• 2017

Eccrine poroma is a common benign cutaneous tumor that originates in an intraepidermal eccrine duct. This tumor exhibits acral distribution (sole, palm), and is rarely encountered in the head and neck area. In fact eccrine poroma in the postauricular area has only been rarely reported. A 55-year-old female visited our hospital with a main complaint of a mass that first developed in the left postauricular area about a year previously. The mass was painless, soft, protruding, domed, and dark red in color, and had slowly enlarged (at presentation it measured $1\times1cm$). Excisional biopsy was performed. Histological examination showed distinct features, and eccrine poroma was diagnosed. Follow-up at 6 months postoperatively showed no recurrence. The frequency of eccrine poroma is dependent on eccrine sweat glands density, and thus, usually occurs on the palms or soles. For eccrine poroma in the head and neck region, the differential diagnosis must rule out other masses, such as nevus, skin tag, pyogenic granuloma, cyst, basal cell carcinoma, and seborrheic keratosis. Importantly, 18% of poromas show malignant transformation, and can develop into porocarcinoma. For these reasons, an eccrine poroma in the facial area requires histological examination, complete excision, and follow-up.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.121-131
• /
• 1986

The stiffness matrix of circularly curved frame elements including the warping effects is formulated by the solutions of vlasov's differential equations, and the procedure for the elastic static analysis of curved girder systems by the displacement method is presented. The validity of this method has been demonstrated by comparing the analysis results with other solutions. And if the tangential lines of the two frame element axes connected at any nodal point coincide, the transformation to the global coordinate system can be omitted when we analyze the structures consisting of circularly curved elements. The theory introduced in this thesis can be applied with sufficient accuracy to the structures built up with horizontally circular curved frame elements which have closed or open cross sections and are symmetric to the axis perpendicular to the plane of the curvature, such as prestressed concrete box girder bridges.

• Korean Journal of Materials Research
• /
• v.17 no.11
• /
• pp.587-592
• /
• 2007

Al-42wt%Nb powder was prepared by high-energy mechanical milling(HEMM). The particle size, phase transformation and microstructure of the as-milled powder were investigated by particle size distribution (PSD) analyzer, scanning electron microscopy (SEM), X-ray diffractometery (XRD), transmission electron microscopy (TEM)and differential thermal analysis (DTA). The milled powders were heated to a sintering temperature at 1000C with under vaccum with vaccum tube furnace. Microstructural examination of sintered Ti-42wt%Nb alloy using 4h-milled powder showed Ti-rich phases (${\alpha}$-Ti) which are fine and homogeneously distributed in the matrix (Nb-rich phase: ${\beta}$-Ti). The sintered Ti-42wt%Nb alloy with milled powder showed higher hardness. The microstructure of the as quenched specimens fabricated by sintering using mixed and milled powder almost are same, but the hardness of as quenched specimen fabricated by using mixed powder increased due to solution hardening of Nb in Ti matrix. The aging effect of these specimens on microstructural change and hardening is not prominent.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.115-124
• /
• 2001

In this paper, authors propose a new nonlinear rotor flux observer for rotor field oriented control of an induction motor which is designed based on the extended Luenberger Observer theory. Extended Luenberger Observer requires minimal solution of nonlinear partial differential equation on its coordinate transformation and linearization needed on a nonlinear observer design in general. The proposed rotor flux observer is derived from the 2 phase model of induction motor on the orthogonal coordination and it has the reduce gain matrix. Simulation and experimentation were performed under the conventional indirect vector control and direct vector control with the proposed observer at different rotor resistance. Simulation results show that the convergence of the proposed observer is influenced by the chosen eigenvalues. Experimentation results on load operation show the direct vector control with the proposed observer is better than the indirect vector control to maintain the characteristics of the vector control.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.415-424
• /
• 1995

Combined models, specified by two or more modeling formalisms, can represent a wide variety of complex systems. This paper describes a methodology for the development of combined models in two model types of discrete event and continuous process. The methodology is based on transformation of continuous state space into discrete one to homomorphically represent dynamics of continuous processes in discrete events. This paper proposes a formal structure which can combine model of the DES and the CS within a framework. The structure employs the DEVS formalism for the DES models and differential or polynomial equations for the CS models. To employ the proposed structure to specify a DEVS/CS combined model, a modeler needs to take the following steps. First, a modeler should identify events in the CS and transform the states of the CS into the DES. Second, a modular employs the formalism to specify the system as the DES. Finally, a moduler developes sub-models for the CS and continguos states of the DES and establishs one-to-one correspondence between the sub-models and such states. The proposed formal structre has been applied to develop a DEVS/CS combined model for the human cardiovascular system. For this, the cardiac cycle is partitioned into a set of phases based on events identified through observation. For each phase, a CS model has been developed and associated with the phase. To validate the DEVS/CS combined model developed, then simulate the model in the DEVSIM + + environment, which is a model simulation results with the results obtained from the CS model simulation using SPICE. The comparison shows that the DEVS/CS combined model adequately represents dynamics of the human heart system at each phase of cardiac cycle.

• Journal of Gastric Cancer
• /
• v.15 no.1
• /
• pp.58-63
• /
• 2015

Gastric duplication cyst is a rare congenital anomaly of the gastrointestinal tract and is especially uncommon in adults. Most cases in adults are discovered incidentally on radiological examination or gastric endoscopy. Accurate diagnosis of these cysts before resection is difficult. Differential diagnoses are varied. Malignant transformation of a gastric duplication cyst is very rare. We present three cases of asymptomatic noncommunicating gastric duplication cysts in adults.

• Development and Reproduction
• /
• v.24 no.3
• /
• pp.215-224
• /
• 2020

Seawater adaptability of steelhead trout increases along with the increase in the size of the fish, independent of parr-smolt transformation. Three 96 h seawater challenge tests were conducted to determine the size at which seawater adaptability of steelhead trout develops. Plasma Na⁺ and Cl^- levels, moisture content, gill Na⁺/K⁺ ATPase activity, and mortality during the 96 h after direct transfer to seawater (32 ppt) were determined. Plasma Na⁺ and Cl^- levels in 50 g fish continuously increased during the 96 h after the transfer to seawater (p<0.05), but the levels in 100 and 150 g fish leveled off after 24 h (p<0.05). Both 100 and 150 g size steelhead trout maintained muscle moisture content (%) better than 50 g size fish (p<0.05). Gill Na⁺/K⁺ ATPase activity in the 100 g size group increased in a time-dependent manner after transfer to seawater (p<0.05), whereas activity in the 50 and 150 g sizes did not increase (p>0.05), for which a possible explanation was discussed. A mere 2.6% mortality in both the 50 and 150 g size groups was observed. In conclusion, the current results indicate that 50 g size steelhead trout did not show development of a high level of hypoosmoregulatory capacity, whereas fish in the 100 and 150 g size groups showed a high level in our experimental conditions. Therefore, the steelhead trout larger than a 100 g size is recommended for transfer to seawater culture.