• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.317-318
• /
• 2023

This study is part of the carbonation degree DB accumulation through quantitative analysis of carbonation depth, Ca(OH)₂ and CO₂ according to the type of finish and years of use of old concrete structures in order to predict the amount of CO₂ that can be absorbed through carbonation of concrete. To this end, the depth of carbonation of the concrete core specimen is measured using an indicator, and the dry amount of water combined with CO₂ in the sample is measured using a differential thermal gravimetric analyzer for samples in the carbonation area and non-carbonated area classified by the indicator, and the absorption compared to the weight of the sample. The amount of absorbed CO₂ was calculated. In addition, the degree of carbonation was calculated through quantitative comparison of Ca(OH)₂ in the carbonation section and non-carbonation section. In the future, we will continue to add the survey and analysis data of dismantled structures and use them as basic data for estimating the amount of carbon dioxide that can be absorbed according to the exposure conditions and years of use by concrete mix.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.366-372
• /
• 2017

In this paper, the analysis of baluns that are inevitably required to design a differential low noise amplifier, The balun converts a single signal input from the antenna into a differential signal, which serves as an input to the differential amplifier. In addition, it protects the circuit from ESD(Electrostatic Discharge) coming through the antenna and helps with input matching. However, in the case of a passive balun used in general, since the AC signal is transmitted through electromagnetic coupling formed between two metal lines, it not only has loss without gain but also has the greatest influence on the total noise figure of the receiving end. Therefore, the design of a balun in a low-noise amplifier is very important, and it is important to design a balun in consideration of line width, line spacing, winding, radius, and layout symmetry that are necessary. In this paper, the factors to be considered for improving the quality factor of balun are summarized, and the tendency of variation of resistance, inductance, and capacitance of the balun according to design element change is analyzed. Based on the analysis results, it is proved that the design of input balun allows the design of low noise, high gain differential amplifier with gain of 24 dB and noise figure of 2.51 dB.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.598-606
• /
• 2013

Anther is the major organ of flower in responsible to reproduction and outward appearance. From anther-specific cDNA library of Lilium Oriental Hybrid 'Acapulco', 2000 expressed sequence tags were selected randomly. Differential slot blot analysis with cDNA probes from the anther and leaf was used to get anther-expressed clone and 570 non-redundant ESTs were obtained and sequenced. Compared to the GenBank database using BLASTX algorithm, 191 clones showed significant similarity but others (66.5%) did not measured to known sequence. Functional categories according to gene ontology (GO) annotation included sequence representing a significant portion of protein in cell and cell part respectively. A transcriptional analysis at 7 different organs and developmental stage was performed using northern blot with thirty ESTs as putative anther specific gene. This report suggest that selection of anther expressed clone using differential slot blot was considered as very effective tool and our current study can provide fundamental information on the lily anther including pollen furthermore.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.4
• /
• pp.355-364
• /
• 2011

In this study, the details of WSA(wavelet series analysis) have been demonstrated to solve the 4th-order elliptic differential equation. It is clear to solve the 2nd-order elliptic differential equation with the basis function of Hat wavelet series that is used in the previous study existed in $H^1$-space. However, it is difficult to solve the 4th order differential equation with same basis function of Hat wavelet series because of insufficient differentiability and integrability. To overcome this problem, the linear equations in terms of moment and deflection have been formulated and solved sequentially that are similar to extension of Elastic Load Method and Moment Area Method in some senses. Also, the differences and common points between the proposed method and the meshless method are discussed in the procedure of WSA formulation. As we expect, it is easy to ascertain that the more terms of Hat wavelet series are used, the better numerical solutions are improved. Also the solutions obtained by WSA have been compared with the conventional FEM solutions in case of Euler beam problems with stress singularity.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.6
• /
• pp.1259-1270
• /
• 2019

The upper bound of differential characteristic probability is mainly used to determine the number of rounds when constructing a block cipher. As the number of rounds affects the performance of block cipher, it is critical to evaluate the tight upper bound in the constructing process. In order to calculate the upper bound of differential characteristic probability, the previous searching methods for minimum number of active S-boxes constructed constraint equations for non-linear operations and linear operations, independently. However, in the case of BOGI design strategy, where linear operation is dependent on non-linear operation, the previous methods may present the less tight upper bound. In this paper, we exploit the properties of BOGI strategy to propose a new method to evaluate a tighter upper bound of differential characteristic probability than previous ones. Additionally, we mathematically proved the validity of our method. Our proposed method was applied to GIFT-64 and GIFT-128, which are based on BOGI strategy, and the upper bounds of differential characteristic probability were derived until 9 round. Previously, the upper bounds of differential characteristic probability for 7-round GIFT-64 and 9-round GIFT-128 were 2^-18.395 and 2^-26.885, respectively, while we show that the upper bounds of differential characteristic probability are more tight as 2^-19.81 and 2^-28.3, respectively.

• Journal of the Korean Ceramic Society
• /
• v.21 no.4
• /
• pp.349-354
• /
• 1984

The purpose of present study is to find the structure crystallization mechanism and physical properties in $TiO_2$ containing lead zinc borosilicate glass system. The experiments such as differential thermal analysis infrared spectral analysis. X-ray diffraction analysis and thermal expansion measurements have been done. Differential thermal analysis of coarse and fine glass powder showed bulk nucleating mechanism for high $TiO_2$ containing glasses and surface nucleation mechanism for low $TiO_2$ containing glasses. The prepared glasses crystallized to crystalline mixture of PbO.2ZnO. $B_2O_3$ .4PbO.2ZnO.$5B_2O_3$and 2PbO.ZnO.$B_2O_3$ when heat-treated in the range of 480 and 51$0^{\circ}C$ and crystallized to PbTiO3 when heat-treated at $600^{\circ}C$. Obtained crystalline phase of $PbTiO_3$ in glass matrix strongly affects to thermal expansion coefficient and the value of crystallized glass varied 68.0 to $107.1{\times}10-7$/$^{\circ}C$ depending on the amount of $TiO_2$added. Infrared spectral analysis showed that [$BO_3$] triangle and [$BO_3$] tetrahedral units were coexisted in the glass with high content of PbO.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.57-64
• /
• 1995

This paper introduced a simple numerical analysis algorithm for the calculation of the dynamic responses of the beam structure with a moving mass. The dynamic equation of motion of the Bernoulli-Euler beam is derived by considering the moving mass as a moving particle, and the dynamic equation of motion is transformed into an integro-differential equation by use of the structural influence function. The numerical solutions of the integro-differential equation are obtained by the modal analysis approach, and compared with those cited from well-known references. The proves that the numerical analysis algorithm proposed herein provide very reliable results, and thus it can be utilized in the design analysis of the beamlike structures exited by a mass which is traveling on it.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.860-865
• /
• 2010

When a circuit breaker is opened, a large capacitance around the buses, the circuit breaker and the potential transformer (PT) might cause PT ferroresonance. During PT ferroresonance, the iron core repeats saturation and unsaturation even though the supplied voltage is a rated voltage. This paper describes an analytical analysis of PT ferroresonance in the transient-state. To analyze ferroresonance analytically, the iron core is modelled by a simplified two-segment core model in this paper. Thus, a nonlinear ordinary differential equation (ODE) for the flux linkage is changed into a linear ODE with constant coefficients, which enables an analytical analysis. In this simplified model, each state, which is either saturated or unsaturated state, corresponds to one of the three modes, i.e. overdamping, critical damping and underdamping. The flux linkage and the voltage in each state are obtained analytically by solving the linear ODE with constant coefficients. The proposed transient analysis is effective in the more understanding of ferroresonance and thus can be used to design a ferroresonance prevention or suppression circuit of a PT.

• Science of Emotion and Sensibility
• /
• v.6 no.4
• /
• pp.33-40
• /
• 2003

This research was conducted to propose a sensibility model for web site design. At first, we collected 100 sensibility words related to web site design through analysis of journal and questionnaires and analysis of dictionary. 16 web sites were rated according to the degree of sensibility corresponding to each words, on the basis of the Semantic Differential(SD) method. The results of assessment were analyzed by means of the factor analysis and Multidimensional Scaling(MDS) method. From this relational analysis of sensibility words, the 18 representative words were abstracted as a result of the research included unique, unusual, rich, soft, cold, warm, vivid, simple, neat, dynamic, urban, light, somber, bright, dark, fresh, masculine, and hard. Also three sensibility dimensions bright-dark, soft-hard, simple-rich were found.

• International Journal of High-Rise Buildings
• /
• v.6 no.1
• /
• pp.11-19
• /
• 2017

High-rise buildings move during construction due to time-dependent material properties of concrete (creep and shrinkage), construction sequences, and structural shapes. The building movements, including vertical and horizontal displacements, result from the sum of axial and lateral deformation of vertical members at each level. In addition to the vertical shortenings, the lateral movement induced by differential shortening can have adverse effects on the construction tolerance and serviceability of non-structural elements such as elevators and curtain walls. In this study a construction stage analysis method is developed to predict lateral movement induced by shortening, including the effect of creep and shrinkage. The algorithm of construction stage analysis is combined with the FE analysis program. It is then applied to predict lateral movement of a 58-story reinforced concrete building that was constructed in Kuala Lumpur, Malaysia. Gravity induced lateral movement of this building is predicted by the construction stage analysis. A field three-dimensional laser scanning survey is carried out to verify the prediction results, and satisfactory agreement is obtained.