• Journal of Korean Society for Quality Management
• /
• v.32 no.3
• /
• pp.182-197
• /
• 2004

In this paper we propose a new method of evaluating customers' service quality using triangle fuzzy numbers and semantic differential scale. These two parameters are useful for quantifying the customers' linguistic variables and subjective judgements. We define the Service Quality(SQ) as the ratio of the expected and perceived service and address the Agreement Rate(AR) calculated from the hamming distance in order to define the Service Rate(SR) as the geometric mean of the SQ and AR. Using the SR in the analysis of service attributes provides more appropriate to measure the customers' service quality and to establish a creative service policy for competitive service quality improvement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1060-1068
• /
• 2002

Compound continuously variable transmission(CVT) mechanisms are proposed, which can offer a backward mode, a geared neutral, an underdrive mode and an overdrive mode. They are composed of a 2K-H I type differential gear unit, a V-belt type continuously variable unit(CVU), a few friction clutches and gears, and not required of a starting device as a torque converter. Compound CVT mechanisms developed here present two distinct operating modes which are a power circulation mode and a power split mode. The transition of two modes takes place at the particular CVU speed ratio. For these CVT mechanisms, performance analysis related to speed ratio, power ratio and efficiency are executed and proven by experimental studies.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.3
• /
• pp.279-284
• /
• 2009

This study investigates the stress at gear by modelling differential gear and using FEM. When gear is driven under power, high equivalent stress of 1596.2MPa is occurred at the stationary shaft. Maximum equivalent stress of 1596.2MPa is also occurred at the bottom and root of tooth and its fatigue life becomes 12.4 as the shortest cycle. As much as it becomes away from the center of gear, the maximum deformation becomes occurred. As exact power is delivered with the precise design of gear, the loss of power energy can be decreased.

• Elastomers and Composites
• /
• v.22 no.4
• /
• pp.333-339
• /
• 1987

A modern kinetic evaluation method for nonisothermal reactions measured with Differential Scanning Calorimetry(DSC) is presented. It is based on multiple linear regression analysis using a number of curve points in a selectable range of conversion. The obtained kinetic data are the basis to compute a reaction process under any condition e.g. isothermal or adiabatic. The DSC measurements was performed on a Mettler TA3000 SYSTEM with the built in evaluation software. Mainly the following reactions are discussed: vulcanization of natural rubber compounds containing vulcanizing accelerators. The purpose of this work is to analyse the vulcanization kinetics of typical NR vulcanization systems using DSC. These systems were chosen because they are typically reactive elastomer and are commercially important.

• Journal of the Korean Mathematical Society
• /
• v.51 no.1
• /
• pp.203-224
• /
• 2014

We propose and analyze a spectral Jacobi-collocation approximation for fractional order integro-differential equations of Fredholm-Volterra type. The fractional derivative is described in the Caputo sense. We provide a rigorous error analysis for the collection method, which shows that the errors of the approximate solution decay exponentially in $L^{\infty}$ norm and weighted $L^2$-norm. The numerical examples are given to illustrate the theoretical results.

• Journal of the Korean Society of Safety
• /
• v.17 no.1
• /
• pp.99-104
• /
• 2002

DQM(differential quadrature method) is applied to computation of eigenvalues of the equations of motion governing the free in-plane vibration for circular curved beams including mid-surface extension and the effects of rotatory inertia. Fundamental frequencies are calculated for the members with various end conditions and opening angles. The results are compared with numerical solutions by other methods for cases in which they are available. The differential quadrature method gives good accuracy even when only a limited number of grid points is used.

• Steel and Composite Structures
• /
• v.15 no.1
• /
• pp.57-79
• /
• 2013

This paper studies the dynamic instability of laminated composite plates under thermal and arbitrary in-plane periodic loads using first-order shear deformation plate theory. The governing partial differential equations of motion are established by a perturbation technique. Then, the Galerkin method is applied to reduce the partial differential equations to ordinary differential equations. Based on Bolotin's method, the system equations of Mathieu-type are formulated and used to determine dynamic instability regions of laminated plates in the thermal environment. The effects of temperature, layer number, modulus ratio and load parameters on the dynamic instability of laminated plates are investigated. The results reveal that static and dynamic load, layer number, modulus ratio and uniform temperature rise have a significant influence on the thermal dynamic behavior of laminated plates.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.523-532
• /
• 2003

In this paper, we designed a 128-bit block cipher, Lambda, which has 16-round extended Feistel structure and analyzed its secureness by the differential cryptanalysis and linear cryptanalysis. We could have full diffusion effect from the two rounds of the Lambda. Because of the strong diffusion effect of the algorithm, we could get a 8-round differential characteristic with probability $2^{-192}$ and a linear characteristic with probability $2^{-128}$. For the Lambda with 128-bit key, there is no shortcut attack, which is more efficient than the exhaustive key search, for more than 8 rounds of the algorithm.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.479-481
• /
• 2006

This paper describes a 2.5V, 320MHz low-noise and low-power Phase Locked Loop(PLL) using a noise-rejected Voltage Controlled ring Oscillator(VCO) fabricated in a TSMC 0.25um CMOS technology. In order to improve the power consumption and oscillation frequency of the PLL, The VCO consist of three-stage fully differential delay cells that can obtain the characteristic of high speed, low power and low phase noise. The VCO operates at 7MHz -670MHz. The oscillator consumes l.58mA from a 320MHz frequency and 2.5V supply. When the PLL with fully-differential ring VCO is locked 320MHz, the jitter and phase noise measured 26ps (rms), 157ps (p-p) and -97.09dB at 100kHz offset. We introduce and analysis the conditions in which ring VCO can oscillate for low-power operation.

• Korean Journal of Mathematics
• /
• v.25 no.1
• /
• pp.45-60
• /
• 2017

This paper focuses on estimation of an non-integral quadratic function (NIQF) and integral quadratic function (IQF) of a random signal in dynamic system described by a linear stochastic differential equation. The quadratic form of an unobservable signal indicates useful information of a signal for control. The optimal (in mean square sense) and suboptimal estimates of NIQF and IQF represent a function of the Kalman estimate and its error covariance. The proposed estimation algorithms have a closed-form estimation procedure. The obtained estimates are studied in detail, including derivation of the exact formulas and differential equations for mean square errors. The results we demonstrate on practical example of a power of signal, and comparison analysis between optimal and suboptimal estimators is presented.