• 한국정보통신학회논문지
• /
• 제8권2호
• /
• pp.281-288
• /
• 2004

본 논문에서는 저속 페이딩 환경 하에서 다중 심볼 차동 복조기의 다이버시티 수신 방법에 대하여 연구한다. MSDD(Multiple Symbol Differential Detection)를 이용하여 다이버시티 수신을 할 경우 복조 블럭의 길이를 크게 할수록 차동 부호화된 MPSK의 Maxim -Ratio-Combining(MRC) 다이버시티 수신기 성능에 수렴하지만 복잡도가 지수적으로 증가하여 현실적으로 구현이 불가능하다. 본 논문에서는 MSDD 수신기에 입력하기 전에 수신 신호들을 정렬 시켜서 결합하는 pre-combining 방식을 제안하였다. 여기서 제안된 pre-combined MSDD 다이버시티 수신기는 준최적 수신기로서 수신기의 복잡도가 복조 블록의 길이에 선형적으로 증가하는 효율적인 MSDD 복조를 가능케 한다. 따라서 고속의 버스트 모뎀과 같이 동기 복조의 어려움이 있을 경우, 채널에 대한 정보에 의존치 않고도 다이버시티 수신을 할 수 있으며 기존의 차동 복조 방식에 비하여 큰 성능 향상을 보여준다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.505-506
• /
• 2007

A ratio differential relay using 80C196KC microprocessor was developed in this paper. The internal faults, external faults and inrush were simulated by EMTP. The performance of developed relay was verified with software and hardware simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.995-999
• /
• 2001

This paper deals with the free vibrations of arches with general boundary condition. Based on the dynamic equilibrium equations of a arch element acting the stress resultants and the inertia forces, the governing differential equation is derived for the in-plane free vibration of such arches. Differential equations are solved numerically to calculate natural frequencies. In numerical examples, the parabolic arch is considered. The effects of the arch rise to span length ratio, the slenderness ratio, the vertical spring coefficient and the rotational spring coefficient on the natural frequencies are analyzed.

• 한국방사선학회논문지
• /
• 제12권5호
• /
• pp.677-682
• /
• 2018

본 연구는 유방 전단파 탄성 초음파에서 탄성도 점수와 변형비를 이용한 방법이 양성과 악성병변의 감별진단에 유용한지를 평가하였다. 탄성 초음파를 시행한 224명을 대상으로 하였으며, 유방조직검사 결과를 바탕으로 후향적인 분석을 하였다. 유방 종괴의 양성과 악성에 따른 5단계의 탄성도 점수와의 동질성 비교는 Fisher's Exact test, 변형비와의 차이검증은 Mann-Whitney U test를 실시하였다. ROC 곡선분석을 통해 악성병변의 예측을 위한 탄성도 점수와 변형비의 최적 cut off 값을 결정하였다. 양성과 악성 결절 군의 분류에 따른 탄성도 점수의 동질성 비교와 변형비의 차이검증 결과에서 각각 통계적으로 유의한 차이를 보였으며(p=.000), ROC 곡선분석에서 양성과 악성 결절의 예측을 위한 탄성도 점수와 변형비의 AUC 0.824, 0.806, cut off 값 3, 4.4로 결정되었다(p=.001). 따라서 탄성도 점수와 변형비는 유방 종괴의 감별진단에 도움을 줄 수 있을 것이다.

• KIEE International Transactions on Power Engineering
• /
• 제4A권3호
• /
• pp.146-151
• /
• 2004

The most widely used primary protection for the internal fault detection of the power transformer is current ratio differential relaying (CRDR) with harmonic restraint. However, the second harmonic component could be decreased by magnetizing inrush when there have been changes to the material of the iron core or its design methodology. The higher the capacitance of the high voltage status and underground distribution, the more the differential current includes the second harmonic during the occurrence of an internal fault. Therefore, the conventional second harmonic restraint CRDR must be modified. This paper proposes a numerical algorithm for enhanced power transformer protection. This algorithm enables a clear distinction regarding internal faults as well as magnetizing inrush and steady state. It does this by analyzing the RMS fluctuation of terminal voltage, instantaneous value of the differential current, RMS changes, harmonic component analysis of differential current, and analysis of flux-differential slope characteristics. Based on the results of testing with WatATP99 simulation data, the proposed algorithm demonstrated more rapid and reliable performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.799-802
• /
• 2002

Continuously variable transmission(CVT) mechanisms considered here combine the functions of a K-H-V type differential gear unit and a V-belt type continuously variable unit(CVU). As combining the functions of a K-H-V type differential gear unit and a V-belt type CVU, 24 different mechanisms are presented. Some useful theoretical formula related to speed ratio, power flow and efficiency are derived and analyzed. These mechanisms have many advantages which are the decrease of CVT size, the increase of overall efficiency, the extension of speed ratio range, and the generation of geared neutral.

• Steel and Composite Structures
• /
• 제15권1호
• /
• pp.57-79
• /
• 2013

This paper studies the dynamic instability of laminated composite plates under thermal and arbitrary in-plane periodic loads using first-order shear deformation plate theory. The governing partial differential equations of motion are established by a perturbation technique. Then, the Galerkin method is applied to reduce the partial differential equations to ordinary differential equations. Based on Bolotin's method, the system equations of Mathieu-type are formulated and used to determine dynamic instability regions of laminated plates in the thermal environment. The effects of temperature, layer number, modulus ratio and load parameters on the dynamic instability of laminated plates are investigated. The results reveal that static and dynamic load, layer number, modulus ratio and uniform temperature rise have a significant influence on the thermal dynamic behavior of laminated plates.

• 한국유체기계학회 논문집
• /
• 제9권3호
• /
• pp.22-28
• /
• 2006

The discharge coefficient in segmental wedge haying ninety degrees yeller angle for the five kinds of opening ratio with differential pressure taps located at both upstream and downstream of one diameter of pipe was measured. Main purpose of this work is placed on specifying the characteristic of discharge coefficient of a segmental wedge used as a primary element of flow metering devices, and suggestion for the fixed location of pressure taps useful. Although the range of the opening ratio over this work is more expanded than previous studies. The opening ratios of segmental wedge, namely 0.3, 0.4, 0.5, 0.6 and 0.7 were investigated. The Reynolds number based on the spool inside diameter ranges from 12,000 to 380,000.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권5호
• /
• pp.2081-2085
• /
• 2012

Background: To investigate the value of ultrasound elastography (UE) in the differentiation between benign and malignant enlarged cervical lymph nodes (LNs). Methods: B-mode ultrasound, power Doppler imaging and UE were examined to determine LN characteristics. Two kinds of methods, 4 scores of elastographic classification and a strain ratio (SR) were used to evaluate the ultrasound elastograms. Results: The cutoff point of SR had high utility in differential diagnosis of benign and malignant of cervical lymph nodes, with good sensitivity, specificity and accuracy. Conclusion: UE is an important aid in differential diagnosis of benign and malignant cervical LNs.

• Journal of Biosystems Engineering
• /
• 제22권4호
• /
• pp.497-502
• /
• 1997

Automation facilities of greenhouses have been continuously developed. However, the conventional two-stage worm gear reducer reveals some problems, including low transmission efficiency. The worm gear reducer also have some difficulties in manufacturing and short life. Therefore, this study was performed to develop a planetary gear reducer, having a high Sear reduction ratio and high torque transmission efficiency. The planetary gear system consisted of a fixed ring gear and a 2-teeth differential ring gear turning slow, as the planetary pinion orbits fast around the fixed ring gear. The developed gear system can achieve a high speed reduction rate at one stage. The reducing system was employed to the greenhouse ventilation system. The reducer has the transmission efficiency of 70.5%, 2∼3 times longer life time, and twofold roll-up torque at an affordable price, comparing with conventional reducers. This reducer can be also applied to many industrial equipments, such as industrial crane, hoist, elevator and gondola etc.