• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.1-7
• /
• 2003

The experimental research was conducted to find an end mill with an ideal helix angle, which has a superior anti-vibration effect and a low machining tolerance. A conventional endmill which all low blades are $30^{\circ}$ helix angles and a different helix angle endmill which the opposite two blades are $30^{\circ}$ and the other opposites are different helix angles were studied. The cutting farce, machining tolerance and surface roughness were obtained. The AE signals appeared to have low values in up-milling rather than in down-milling. These are also appeared to have low values at low spindle revolutions rates. The cutting force values of Fxy and Fxyz were found to be increased according to the value of helix angle. In up-milling, it was difficult to find a definite tendency in machining tolerance, but in down-milling machining tolerance of the different helix angle end mill was found to be lower than that of the convention end mill. There is a definite tendency that the surface roughness gets better as the RPM increases. In down-milling, Type A($25^{\circ}$＋$30^{\circ}$) appeared to bring the most satisfactory result.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.196-201
• /
• 2003

The experimental research was conducted to find an end mill with an ideal helix angle, which has a superior anti-vibration effect and a low machining-tolerance. A conventional endmill which all four blades are $30^\circ$ helix angles and a different helix angle endmill which the opposite two blades are $30^\circ$ and the other opposites are different helix angles were studied. The cutting force, machining tolerance and surface roughness were obtained. The AE signals appeared to have low values in up-milling rather than in down-milling. These are also appeared to have low values at low spindle revolutions rates. The cutting force values of Fxy and Fxyz were found to be increased according to the value of helix angle. In up-milling, it was difficult to find a definite tendency in machining tolerance, but in down-milling, machining tolerance of the different helix angle end mill was found to be lower than that of the convention end mill. There is a definite tendency that the surface roughness gets better as the RPM increases. In down-milling, Type $A(25^\circ+30^\circ)$ appeared to bring the most satisfactory result.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.15-22
• /
• 2002

This study shows how the change of helix angle of different helix angle end mill affects machining accurracy. It was verified that cutting force are remarkably low when endmill has helix angle of different helix angle 250, 310, 370 and AE signal have less reationshap with the change of helix angle. Moreover, as the number of rotations are increases, the AE signal increased with the proportion to the number but cutting force are inversely proportional to the rotation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.239-244
• /
• 2002

This study shows how the change of helix angle for different helix angle end mill affects machining accuracy. It was verified that cutting forces are remarkably low when endmill has helix angle of different helix angle $25^{\circ}\;, \; 31^{\circ}\; , \; 37^{\circ}$and AE signals have less relationship with the chance of helix angle Moreover, as the number of rotations are increased, the AE signals are increased with the proportion to the number but cutting forces are inversely proportional to the rotation.