• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.164-168
• /
• 2017

This study experimentally determined the effect of calcium ion ($Ca^{2+}$) (0-0.55 mM) and intial pH (4.0-10.0) on phosphorus (P) removal in synthetic wastewater (2 mg P/L) using titanium tetrachloride ($TiCl_4$) (0.12-0.18 mM). At TiCl4 concentration ([$TiCl_4$]) = 0.12 mM, the P removal efficiency was the highest (95.1%) at pH 7 but the efficiency decreased to 51.4% at pH 8. The P removal efficiency was 55.6% at $Ca^{2+}$ concentration ([$Ca^{2+}$]) = 0 mM but the efficiency increased to 90.5% at [$Ca^{2+}$] = 0.045 mM at [$TiCl_4$] = 0.12 mM. On the other hand, the P removal efficiency difference was not large (96.5-99.5%) with [$Ca^{2+}$] at [$TiCl_4$] = 0.15-0.18 mM. Within the design boundaries of $0.00{\leq}[Ca^{2+}]{\leq}0.18mM$ and $7.0{\leq}initial$ $pH{\leq}9.0$ at [$TiCl_4$] = 0.12 mM, the 90% P removal efficiency could be achieved at $[Ca2+]{\geq}0.10mM$ with pH 8.0 and $[Ca2+]{\geq}0.12mM$ with pH 9.0.

• Atmosphere
• /
• v.25 no.1
• /
• pp.185-191
• /
• 2015

Ambient measurements of aerosol light absorption (${\sigma}_a$) and scattering coefficients (${\sigma}_s$) were done at Gosan climate observatory during summer 2008 using a 3-wavelength photoacoustic soot spectrometer (PASS). PASS was deployed photoacoustic method for light absorption and integrated nephelometry for light scattering measurements. The ${\sigma}_a$ and ${\sigma}_s$ from PASS were compared with those from co-located aethalometer and nephelometer measurements. The aethalometer measurements of ${\sigma}_a$ correlated reasonably well with photoacoustic measurements, but the slope of the linear fitting line indicated the PASS measurement values of ${\sigma}_a$ were larger by a factor of 1.53. The nephelometer measurement values of ${\sigma}_s$ correlated very well with PASS measurements of ${\sigma}_s$, with a slope of 1.12 and a small offset. Comparing to the aethalometer measurements, the photoacoustic measurements of ${\sigma}_a$ didn't exhibit a significant (i.e., the ratio between aethalometer and PASS increased) change with increasing relative humidity (RH). The ratio of ${\sigma}_s$ between nephelometer and PASS increased with increasing RH, especially when the RH increased beyond 80%. This apparent increase in ${\sigma}_s$ with RH may be due to the contribution of hygroscopic growth of aerosols.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.551-562
• /
• 1999

This study was undertaken to investigate the relation between orthodontic force magnitude and the amount of tooth movement. And more light force application for reducing root resorption Twenty-four rats were divided into three experimental groups(A, B, C) based on force magnitude and application method. Springs of 50g force were applied to A group, springs of 100g force were applied to B group and springs of 25g force were applied to C group initially, and after 4 days springs of C group were changed to springs of 50g force. Two kinds of $sentally^{(R)}$(GAC U.S.A.) closed coil spring, 50g and 100g, were used. And we made 25g springs by heat treatment process of 50g springs. Each spring was inserted between the maxillary central incisor and the maxillary left first molar. Amounts of tooth movement were measured everyday by digital caliper($Digimatic^{(R)}$, Mitutoyo, Japan) under inhalation anesthesia for 15 days. After 15 days, all rats were sacrificed and histological samples were obtained with Hematoxyline-Eosin stain and Masson's trichrome stain. Following conclusion were made; 1. Group B showed the mean cumulative tooth movement of $2.19{\pm}0.41mm$ at 15th day, which was greatest among three groups, followed by group C($2.06{\pm}0.10mm$), group A($1.90{\pm}0.49mm$) respectively. however, there was no statistically difference among three groups. 2. All groups showed general tooth movement pattern and A, B, C group finished lag phase at 9th, 8th, 7th day, but there was no statistical significance. 3. Group A,B,C showed root resorption and especially group B showed the most severe root resorption and group C showed milder root resorption than other groups. According to the above results, large initial force with the development of a flirty widespread hyalinized zone may cause severe root resorption, so initial force should be applied lightly to reduce hyalinized area and eventually root resorption and then increased force will induce efficient tooth movement.

• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.303-312
• /
• 2004

An unfavorable tipping movement can occur during the retraction of anterior teeth because orthodontic force is loaded by brackets positioned far from the center of resistance. To avoid this unfavorable movement, a compensating curved wire or lingual root torque wire is used. The purpose of this study is to investigate, using photoelastic material, the distribution of initial stress associated with the retraction of the incisors according to the degree of the compensating curve, to model changes associated with tooth ud alveolar bone structure. The following results were obtained by analysis of the polarizing plate of the effects of initial stress resulting from retraction of the anterior teeth: 1. When the incisors were retracted using combination archwire or sliding mechanics, the maximal polarizing pattern of the apical area decreased as the degree of the compensating owe increased from 0 to 15 to 30. 2. When the incisors were retracted by the combination archwire or sliding mechanics, the maximal polarizing pattern of the canine and premolar area increased as the degree of the compensating curve increased from 0to 15to 30. 3. A lower degree of polarizing patterns were associated with the combination archwire technique than the sliding mechanics technique at a given force. The above results indicate that there is no significant difference between the combination loop archwire technique and sliding mechanics, for the retraction of maxillary anterior teeth with decreased lingual tipping tendency by a compensating curve on the arch wire. However, the use of sliding mechanics is more effective for the prevention of lingual inclination of the anterior teeth, because the hook used in sliding mechanics is closer to the center of resistance of the maxillary anterior teeth.

• Korean Journal of Environmental Biology
• /
• v.30 no.3
• /
• pp.210-218
• /
• 2012

The morphological characteristics, carbon and nitrogen concentrations, stable isotope values and photosynthetic rates of Porphyra yezoensis were studied at the main purple lavers production areas on southwestern coast of Korea. The morphological characteristics of leaf length, leaf width and weight of Porphyra blades were between 11.6~16.3 (average 13.8) cm, 4.6~6.3 (average 5.4) cm, $1.1{\sim}2.6(average\;1.86)g\;DW\;m^{-2}$, respectively. Photosynthetic pigment of Chl a concentration of Porphyra blades was between $2.18{\sim}17.77(average\;9.65)mg\;DW\;Chl\;a\;m^{-2}$. Carbon and nitrogen concentrations of Porphyra blades was between $201{\sim}317(average\;240)mg\;DW\;g^{-1}$, $39.8{\sim}50.0(average\;43.5)mg\;DW\;g^{-1}$ and C/N ratio 5.0~6.7 (average 5.5). The range of average ${\delta}^{13}C$ and ${\delta}^{15}N$ values of Porphyra blades was between - 25.6 to - 24.0 (average - 24.7)‰ for ${\delta}^{13}C$, and 1.3 to 4.1 (average 2.1)‰ for ${\delta}^{15}N$. Photosynthetic characteristics of seaweeds measured by pulse amplitude modulation (PAM) fluorometry was used as an indicator of photosynthetic activity. We use Diving-PAM fluorometry to examine photosynthetic rates of the seaweeds Porphyra yezoensis at each station. Maximum quantum yield of Porphyra blades was between 0.46~0.55 (average 0.52), the variance of the effective PS II maximum quantum yield of the station was broadly similar. Maximum relative electron transport rate (rETRmax) of Porphyra blades was between $4.71{\sim}5.84(average\;5.33){\mu}mol\;electrons\;m^{-2}\;s^{-1}$, the changes of maximum relative electron transport rate (rETRmax) of Porphyra yezoensis were similar to those of PS II maximum quantum yield. Photosynthetic efficiency (${\alpha}$) was between 0.027~0.045 (average 0.036). Minimum saturating irradiance ($E_k$) range was $139{\sim}180(average\;156){\mu}mol\;photons\;m^{-2}\;s^{-1}$. Minimum saturating irradiance ($E_k$) made a difference by station within the area on southwestern coast. Carbon and nitrogen concentrations and photosynthetic rates of Porphyra blades production areas on southwestern coast were broadly similar. The photosynthetic characteristics showed low photosynthetic rates because the low maximum quantum yields and low maximum relative electron transport rate.

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.407-413
• /
• 2018

The current study reviews the manufacturing characteristics, upon aging, using different distillation methods with Saccharomyces cerevisiae 88-4 isolated from traditional Nuruk. The alcohol content slightly decreased at 180 days of aging period, under the conditions: -60 cmHg, distilling temperature $50^{\circ}C$, head cut 7%, and body cut 30%. The alcohol content decreased by 2.2% at: -50 cmHg, distilling temperature $60^{\circ}C$, head cut 7%, and body cut 30%. From 2-thiobarbituric acid (TBA) analysis, the TBA values were not found to change significantly in most of the alcohols, but increased at conditions of: -60 cmHg, distilling temperature $60^{\circ}C$, head cut 7%, and body cut 50% and -50 cmHg, distilling temperature $50^{\circ}C$, head cut 7%, and body cut 50%, when initial alcohol levels were low. According to n-propanol, iso-butanol, and isoamyl alcohol analysis, with increasing aging period, the n-propanol and isoamyl alcohol content did not change, although that of iso-butanol decreased. The flavor components showed different results based on the aging period. Results of sensory evaluation showed no significant difference based on aging. The sensory evaluation test was continued for 180 days at a condition of: -60 cmHg, distilling temperature $60^{\circ}C$, and body cut 50%, which had the best overall evaluation ($5.8{\pm}0.9$).

• Pediatric Infection and Vaccine
• /
• v.8 no.2
• /
• pp.181-190
• /
• 2001

Purpose : Lymphadenitis is the most common complication of BCG vaccination and has various clinical course and prognosis, but there are no accurate guidelines for management of BCG lymphadenitis. We performed this study to reveal the clinical course of BCG lymphadenitis and provide guidelines for its management. Methods : From January, 1997, to May, 2000, 73 patients in the 3~24 months were enrolled. We investigated retrospectively the size, site, and number of lymphadenitis, tuberculin skin test induration, used BCG strains, vaccination age, injection site, treatment and clinical course. The effects of various variables on clinical course were evaluated. Results : 1) There were no statistically significant difference between lymphadenitis size and tuberculin test induration diameter, spontaneous resolution rate, and suppuration rate. 2) Later vaccination(${\geq}1$ mo) and supraclavicular lymphadenitis increased suppuration rate. Using domestic BCG product increased surgical treatment rate. 3) According to treatment(observation vs antituberculous medication), medication did not affect the prevention of suppuration and ironically increased the rate of suppuration and surgical treatment. 4) Suppurative lymphadenitis required more surgical treatment than non-supurative one. Conclusions : Clinical course of BCG lymphadenitis is affected by vaccination age, used BCG strains, site of lymphadenitis, antituberculous medication and suppuration, but not affected by size and number of lymphadenitis. For management of BCG lymphadenitis, systemic antituberculous medicaion is not recommended and regular follow up with observation should be the mainstay. But for suppuration, active surgical en bloc resection should be the treatment of choice.

• Restorative Dentistry and Endodontics
• /
• v.36 no.3
• /
• pp.188-195
• /
• 2011

Objectives: The purpose of this study was to evaluate the polymerization shrinkage stress among conventional methacrylate-based composite resins and a silorane-based composite resin. Materials and Methods: The strain gauge method was used for the determination of polymerization shrinkage strain. Specimens were divided by 3 groups according to various composite materials. Filtek Z-250 (3M ESPE) and Filtek P-60 (3M ESPE) were used as a conventional methacrylate-based composites and Filtek P-90 (3M ESPE) was used as a silorane-based composites. Measurements were recorded at each 1 second for the total of 800 seconds including the periods of light application. The results of polymerization shrinkage stress were statistically analyzed using One way ANOVA and Tukey test (p = 0.05). Results: The polymerization shrinkage stress of a silorane-based composite resin was lower than those of conventional methacrylate-based composite resins (p < 0.05). The shrinkage stress between methacrylate-based composite resin groups did not show significant difference (p > 0.05). Conclusions: Within the limitation of this study, silorane-based composites showed lower polymerization shrinkage stress than methacrylate-based composites. We need to investigate more into polymerization shrinkage stress with regard to elastic modulus of silorane-based composites for the precise result.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.132-136
• /
• 2005

Purpose: The purpose of this study was to compare the clinical results of the arthroscopic anterior cruciate ligament reconstruction used by Bone-Patella tendon-Bone autograft and Achilles tendon allograft. Materials and Methods: We reviewed the results of patients who had been managed with arthroscopic anterior cruciate ligament reconstruction using different graft such as Bone-Patella tendon-Bone autograft and Achilles les tendon allograft. 60patients (average age, 33.5 years)were retrospectively evaluated. The one group(average age, 33.4 years) was 32 patient who had been managed with arthroscopic anterior cruciate ligament reconstruction using Bone-Patella tendon-Bone autograft. The other group(average age, 32.1 years) was 28 patient who had been managed with arthroscopic anterior cruciate ligament reconstruction using Achilles tendon allograft. 2 groups were evaluated subjectively by Lysholm knee scoring scale and objectively by KT-2000 arthrometer. The follow-up period was more than a year(average, 18 month). An early rehabilitation protocol was instituted. Results: On Lysholm knee scoring scale, the final evaluation was nearly normal in all patients. We could not find statistical difference among the two groups by KT-2000TM arthrometer. Conclusion: The use of allografts may be an acceptable choice for ACL reconstruction.

• Korean Journal of Poultry Science
• /
• v.47 no.2
• /
• pp.61-68
• /
• 2020

This study was conducted to compare and analyze meat quality of Korean native duck (KND) meat relative to stocking density. The stocking densities under investigation were 4, 5, 6, 7, 8 and 9 birds/㎡. The experiment comprised six treatments and four replications, wherein the breast meat (pH, meat color, and physicochemical properties) and leg meat (fatty acid contents) of 8-week-old KNDs (2.8±0.2 kg) were used. pH of breast meat decreased linearly and quadratically (P<0.05) as stocking density increased. Ash content also decreased linearly (P<0.05) as stocking density increased; however, moisture, fat, and protein contents did not differ significantly among treatments. Furthermore, meat color and cooking loss (CL) increased linearly (P<0.05) as stocking density increased whereas neither shear force (SF) nor water holding capacity (WHC) displayed a significant difference among treatments. Palmitic acid (C16:0) and stearic acid (C18:0) contents decreased quadratically (P<0.05) as stocking density increased whereas, conversely, linoleic acid (C18:1n9) and eicosenoic acid (C20:1n9) contents increased linearly (P<0.05) as stocking density increased. Additionally, γ-linoleic acid (C18:3n6) content increased linearly and quadratically (P<0.05) as stocking density increased, but a decrease (P<0.05) was observed in arachidonic acid (C20:4n6) content. Saturated fatty acid (SFA) and total unsaturated fatty acid (TUFA) contents did not show significant differences among treatments relative to stocking density. However, monounsaturated fatty acid (MUFA) content increased linearly (P<0.05) and polyunsaturated fatty acid (PUFA) content decreased linearly (P<0.05) as stocking density increased. These results can be utilized as basic data for research on the effect of stocking density on KNDs.