• Title/Summary/Keyword: Difference matrix

Search Result 970, Processing Time 0.04 seconds

Kinetics and Mechanism of Corrosion of ρ-alumina Bonded Alumina Castable by Molten Slag (ρ-알루미나결합 알루미나 캐스터블의 용융슬래그에 의한 침식기구)

  • 천승호;전병세
    • Journal of the Korean Ceramic Society
    • /
    • v.40 no.10
    • /
    • pp.1015-1020
    • /
    • 2003
  • The Corrosion behavior of the matrix of the $\rho$-alumina bonded alumina vibrated castable was, on the basis of Jabsen's theory, elucidated by use of the Kingery's reaction mechanism. Corrosion of the matrix during induction period was controlled by the molecular diffusion. The temperature dependence of activation process is well established by the Arrhenius plots. The difference of Ca concentration between slag and interface is 23.2%, which causes a driving force of the materials transfer. The extent of the corrosion of the matrix is more deeper than that of the sintered mullite, but the corrosion mechanism can be well employed as the reaction mechanism proposed by the Kingery. The life time of the castable may be well estimated by the corrosion mechanism of Kingery.

Study on the Sintering, Repressing and Mechanical Properties of Al2O3 and Al-Cu-SiC Composites (Al2O3와 SiC 강화재가 첨가된 Al-Cu 기지 복합재료의 소결, 재압축 및 기계적 특성에 관한 연구)

  • 박정수;이성규;안재환;정형식
    • Journal of Powder Materials
    • /
    • v.11 no.2
    • /
    • pp.171-178
    • /
    • 2004
  • Effects of liquid phase and reinforcing particle morphology on the sintering of Al-6 wt%Cu-10 vol% $Al_2O_3$ or SiC particles were studied in regards to densification, structure and transverse rupture properties. The Al-Cu liquid phase penetrated the boundaries between the aluminum matrix powders and the interfaces with reinforcing particles as well, indicating a good wettability to the powders. This enhanced the densification during sintering and the resulting strength and ductility. Since most of the copper added, however, was dissolved in the liquid phase and formed a brittle $CuAl_2$ phase upon cooling rather than alloyed with the aluminum matrix, the strengthening effect by the copper was not fully realized. Reinforcing particles of agglomerate type were found less suitable for the liquid phase sintering than solid type particles. $Al_2O_3$ and SiC particles protluced little difference on the sintering behavior but their size had a large effect. Repressing of the sintered composites increased density and bending properties but caused debonding at the matrix-particle interfaces and also fracturing of the particles.

Multilayer Neural Network Using Delta Rule: Recognitron III (텔타규칙을 이용한 다단계 신경회로망 컴퓨터:Recognitron III)

  • 김춘석;박충규;이기한;황희영
    • The Transactions of the Korean Institute of Electrical Engineers
    • /
    • v.40 no.2
    • /
    • pp.224-233
    • /
    • 1991
  • The multilayer expanson of single layer NN (Neural Network) was needed to solve the linear seperability problem as shown by the classic example using the XOR function. The EBP (Error Back Propagation ) learning rule is often used in multilayer Neural Networks, but it is not without its faults: 1)D.Rimmelhart expanded the Delta Rule but there is a problem in obtaining Ca from the linear combination of the Weight matrix N between the hidden layer and the output layer and H, wich is the result of another linear combination between the input pattern and the Weight matrix M between the input layer and the hidden layer. 2) Even if using the difference between Ca and Da to adjust the values of the Weight matrix N between the hidden layer and the output layer may be valid is correct, but using the same value to adjust the Weight matrixd M between the input layer and the hidden layer is wrong. Recognitron III was proposed to solve these faults. According to simulation results, since Recognitron III does not learn the three layer NN itself, but divides it into several single layer NNs and learns these with learning patterns, the learning time is 32.5 to 72.2 time faster than EBP NN one. The number of patterns learned in a EBP NN with n input and output cells and n+1 hidden cells are 2**n, but n in Recognitron III of the same size. [5] In the case of pattern generalization, however, EBP NN is less than Recognitron III.

  • PDF

Dependence of External Magnetic Field in the Matrix-Type SFCL with the Separated or the Integrated Reactors (분리형과 일체형 리액터에 따른 매트릭스형 초전도 한류기의 외부자장 의존성 연구)

  • Cho, Yong-Sun;Choi, Hyo-Sang;Jung, Byoung-Ik;Go, Sung-Pil
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.60 no.4
    • /
    • pp.880-884
    • /
    • 2011
  • The matrix-type superconducting fault current limiter (MSFCL) consists of the trigger and current-limiting parts. The trigger part with reactors connected in parallel improves the quenching characteristics by applying the external magnetic field into the superconducting units. The current-limiting part with superconducting units connected in parallel and shunt reactors connected in series limit the fault current when the fault occurs. We developed the integrated reactor with the trigger and the current-limiting parts to apply high external magnetic field into the superconducting units. This was composed of a superconducting unit for the trigger part and two superconducting units for the current-limiting parts. We confirmed that the external magnetic field generated in the MSFCL with an integrated reactor was larger than that of the MSFCL with the separated reactors. So the differences of voltages generated between superconducting units were decreased in the difference according to the increment of the applied voltage. The whole magnitude of the SFCL was reduced because the volume of an integrated reactor could be reduced by one-third than that of the separated reactors. We confirmed that the critical behavior between the superconducting units in the MSFCL with an integrated reactor was more improved than that of the MSFCL with the separated reactors.

Evaluating the effects of the inclinations of rock blocks on the stability of bimrock slopes

  • Khorasani, Emad;Amini, Mehdi;Hossaini, Mohammad Farouq;Medley, Edmund
    • Geomechanics and Engineering
    • /
    • v.17 no.3
    • /
    • pp.279-285
    • /
    • 2019
  • The process of slope stability analysis is one of the most important stages in design of some civil and mining projects. Bimslopes are made from bimrocks (block-in-matrix rocks) where rocky blocks are distributed in a bonded matrix of finer texture. These kind of slopes are often seen in weathered and near-surface depths. Previous studies have shown that VBP (Volumetric Block Proportion) is one of the most significant factors affecting bimrocks strength and consequently the stability of bimslopes. In this paper, the influence of block inclinations on bimslope stability have been investigated. For this purpose, 180 theoretical models have been made with various VBPs, all of them have a specified block size distribution. These bimslopes contain blocks with differing dips relative the slope inclination. Also for each kind of block inclination, 10 different blocks arrangements have been modeled. The Finite Element Method (FEM) was used to analysis the stability of these bimslopes models. The results showed the inclination of blocks has a strong impact on the Safety Factor and stability of bimslopes. When the difference in angle of dip of blocks relative to the slope angle is maximum, the Safety Factor of bimslopes tends to be a maximum compared with the matrix-only state. Furthermore, with increasing VBP of bimslopes stability increases. The graphs obtained from this study could be used for preliminary guidance in the projects design with bimslopes.

Wavelet analysis based damage localization in steel frames with bolted connections

  • Pnevmatikos, Nikos G.;Blachowski, Bartlomiej;Hatzigeorgiou, George D.;Swiercz, Andrzej
    • Smart Structures and Systems
    • /
    • v.18 no.6
    • /
    • pp.1189-1202
    • /
    • 2016
  • This paper describes an application of wavelet analysis for damage detection of a steel frame structure with bolted connections. The wavelet coefficients of the acceleration response for the healthy and loosened connection structure were calculated at each measurement point. The difference of the wavelet coefficients of the response of the healthy and loosened connection structure is selected as an indicator of the damage. At each node of structure the norm of the difference of the wavelet coefficients matrix is then calculated. The point for which the norm has the higher value is a candidate for location of the damage. The above procedure was experimentally verified on a laboratory-scale 2-meter-long steel frame. The structure consists of 11 steel beams forming a four-bay frame, which is subjected to impact loads using a modal hammer. The accelerations are measured at 20 different locations on the frame, including joints and beam elements. Two states of the structure are considered: healthy and damaged one. The damage is introduced by means of loosening two out of three bolts at one of the frame connections. Calculating the norm of the difference of the wavelet coefficients matrix at each node the higher value was found to be at the same location where the bolts were loosened. The presented experiment showed the effectiveness of the wavelet approach to damage detection of frame structures assembled using bolted connections.

An Exploratory Study on Human Right of Social Workers Who Works at the Disabled Residential Facilities - Focused on Busan Area - (IPA를 적용한 장애인거주시설 종사자의 인권에 대한 탐색적 연구 -부산지역 장애인거주시설 종사자를 중심으로-)

  • Kim, Sunjoo
    • The Journal of the Korea Contents Association
    • /
    • v.17 no.11
    • /
    • pp.461-469
    • /
    • 2017
  • The purpose of this study is to verify the difference of importance-performance about human right of social worker who works in the Disabled Residential Facilities. And based on this result, we wanted suggest strategies to implement human rights for the disabled. We collected data from 539 social worker who works in the Disabled Residential Facilities in Busan. We tried analysis descriptive statistics, T-Test and Importance-Performance Analysis. The Result is first, the importance level(total mean 6.27) was higher than the performance level(total mean 6.07) to human rights of the disabled. Second, in items of human rights of the disabled, there was the difference of the importance and the degree of performance. Third, with the exception of political right, the difference between the importance and performance of liberty, the right to survival, and the social right was statistically significant. Based on these results, I suggest practical implications and future tasks.

Analysis of Performance according to LDPC Decoding Algorithms (저밀도 패리티 검사부호의 복호 알고리즘에 따른 성능 비교 분석)

  • Yoon, Tae Hyun;Park, Jin Tae;Joo, Eon Kyeong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.37A no.11
    • /
    • pp.972-978
    • /
    • 2012
  • LDPC (low density parity check) code shows near Shannon limit performance by iterative decoding based on sum-product algorithm (SPA). Message updating procedure between variable and check nodes in SPA is done by a scheduling method. LDPC code shows different performance according to scheduling schemes. The conventional researches have been shown that the shuffled BP (belief propagation) algorithm shows better performance than the standard BP algorithm although it needs less number of iterations. However the reason is not analyzed clearly. Therefore the reason of difference in performance according to LDPC decoding algorithms is analyzed in this paper. 4 cases according to satisfaction of parity check condition are considered and compared. As results, the difference in the updating procedure in a cycle in the parity check matrix is considered to be the main reason of performance difference.

MMP-1 promoter polymorphism in Korean with generalized aggressive periodontitis

  • Oh, Hyong-Suk;Kim, Ok-Su;Kim, Young-Jun;Chung, Hyun-Ju
    • Journal of Periodontal and Implant Science
    • /
    • v.39 no.sup2
    • /
    • pp.269-278
    • /
    • 2009
  • Purpose: The aim of this study was to investigate matrix metalloproteinase 1 (MMP-1) gene polymorphism (1G/2G at -1607 and A/G at -519) in Korean subject and to assess the association between polymorphism and periodontal status. Methods: Forty nine generalized aggressive periodontitis (GAP) patients and 57 periodontally healthy children were recruited and genomic DNA was extracted from buccal swab. The polymorphisms of MMP-1 promoter genes were determined by polymerase chain reaction and restriction fragment length product (PCR-RFLP) method. The distribution of genotype and allele frequency was compared between 2 groups by ${\chi}^2$ test. Results: There was a significant difference in the distribution of genotypes and frequency of alleles between the GAP and reference groups at the position - 519 of MMP-1 gene promoter (P<0.05). Allele G carrier rate was significantly lower in GAP group than that of the reference group (P< 0.001). At the position -1607 of MMP-1 gene promoter, genotype distribution and allele frequency showed no statistically significant difference between the groups. However, in the female group, a significant difference was observed between the groups for the genotype distribution, allele frequency and allele 1G carrier rate (P< 0.05). Conclusions: The DNA polymorphism at the MMP-1 gene promoter might be associated with GAP in Korean.

Form-finding analysis of suspension bridges using an explicit Iterative approach

  • Cao, Hongyou;Zhou, Yun-Lai;Chen, Zhijun;Wahab, Magd Abdel
    • Structural Engineering and Mechanics
    • /
    • v.62 no.1
    • /
    • pp.85-95
    • /
    • 2017
  • This paper presents an explicit analytical iteration method for form-finding analysis of suspension bridges. By extending the conventional analytical form-finding method predicated on the elastic catenary theory, two nonlinear governing equations are derived for calculating the accurate unstrained lengths of the entire cable systems both the main cable and the hangers. And for the gradient-based iteration method, the derivation of explicit calculation for the Jacobian matrix while solving the nonlinear governing equation enhances the computational efficiency. The results from sensitivity analysis show well performance of the explicit Jacobian matrix compared with the traditional finite difference method. According to two numerical examples of long span suspension bridges studied, the proposed method is also compared with those reported approaches or the fundamental criterions in suspension bridge structural analysis, which eventually confirms the accuracy and efficiency of the proposed approach.