• Asian-Australasian Journal of Animal Sciences
• /
• 제28권6호
• /
• pp.847-854
• /
• 2015

The objective of this study was to determine the effects of graded inclusions of wheat bran (0%, 9.65%, 48.25% wheat bran) and two growth stages (from 32.5 to 47.2 kg and 59.4 to 78.7 kg, respectively) on the apparent ileal digestibility (AID), apparent total tract digestibility (ATTD) and hindgut fermentation of nutrients and energy in growing pigs. Six light pigs (initial body weight [BW] $32.5{\pm}2.1kg$) and six heavy pigs (initial BW $59.4{\pm}3.2kg$) were surgically prepared with a T-cannula in the distal ileum. A difference method was used to calculate the nutrient and energy digestibility of wheat bran by means of comparison with a basal diet consisting of corn-soybean meal (0% wheat bran). Two additional diets were formulated by replacing 9.65% and 48.25% wheat bran by the basal diet, respectively. Each group of pigs was allotted to a $6{\times}3$ Youden square design, and pigs were fed to three experimental diets during three 11-d periods. Hindgut fermentation values were calculated as the differences between ATTD and AID values. For the wheat bran diets, the AID and ATTD of dry matter (DM), ash, organic matter (OM), carbohydrates (CHO), gross energy (GE), and digestible energy (DE) decreased with increasing inclusion levels of wheat bran (p<0.05). While only AID of CHO and ATTD of DM, ash, OM, CHO, GE, and DE content differed (p<0.05) when considering the BW effect. For the wheat bran ingredient, there was a wider variation effect (p<0.01) on the nutrient and energy digestibility of wheat bran in 9.65% inclusion level due to the coefficient of variation (CV) of the nutrient and energy digestibility being higher at 9.65% compared to 48.25% inclusion level of wheat bran. Digestible energy content of wheat bran at 48.25% inclusion level (4.8 and 6.7 MJ/kg of DM, respectively) fermented by hindgut was significantly higher (p<0.05) than that in 9.65% wheat bran inclusion level (2.56 and 2.12 MJ/kg of DM, respectively), which was also affected (p<0.05) by two growth stages. This increase in hindgut fermentation caused the difference in ileal DE (p<0.05) to disappear at total tract level. All in all, increasing wheat bran levels in diets negatively influences the digestibility of some nutrients in pigs, while it positively affects the DE fermentation in the hindgut.

• 한국산림과학회지
• /
• 제102권1호
• /
• pp.122-128
• /
• 2013

우리나라에 분포하는 가침박달 9개 집단의 유전다양성과 유전구조를 ISSR 표지자를 이용하여 분석하였다. 선발된 6개 ISSR primer에서 다형성 band는 35개로 primer당 평균 5.8개(S.D.=2.32), 집단별 다형적 유전자좌의 비율은 평균 78.7%로 나타났다. AMOVA에서 전체 유전변이의 27.8%는 집단간 차이에 기인하며, 72.2%는 집단내 개체 간 차이로 설명할 수 있었다. 베이즈 방법에 따른 유전분화는 ${\theta}^{11}$와 $G_{ST}$가 각각 0.249와 0.227로 추정되었으며, 전체 집단에 대한 근친교배율은 0.412로 계산되었다. 집단간의 지리적 거리와 유전적 거리에 대한 상관성 분석에서 지리적 거리가 멀수록 유전적으로 상이한 것으로 나타났다. 베이즈 군집분석에서 가침박달 집단은 유전변이 분포에 따라서 1) 대구 지역의 2집단 및 안동, 청송, 예천 집단이 하나의 구역으로, 그리고 2) 단양, 영월 집단과 3) 임실, 청주 집단이 각각 하나의 구역으로 묶여서 총 3개 구역으로 나눌 수 있었다. 구역의 유전변이는 백두대간과 정맥의 산줄기를 경계로 분포하는 것으로 생각되며, AMOVA에서 전체 유전변이량의 10.0%는 구역간, 19.7%는 집단간, 나머지 70.3%는 집단내 개체간 차이로 설명되었다. 아울러 가침박달의 현지내 유전자원보존을 위한 유전다양성 평가와 유전구조 분석결과의 적용에 대하여 살펴보았다.

• 한국전자파학회논문지
• /
• 제23권6호
• /
• pp.723-730
• /
• 2012

위성 SAR(Synthetic Aperture Radar)를 정확하게 보정하기 위해서는 검보정에 사용되는 삼각 전파 반사기(Trihedral Corner Reflector: TCR)의 RCS(Radar Cross Section)를 정확하게 계산해야 한다. 본 연구에서는 TCR이 설치된 지표면이 TCR의 RCS 값에 얼마나 영향을 미치는지를 알아보기 위해서 지표면에서의 반사파와 TCR 모서리에서의 회절파를 이론적으로 계산하여 검보정 사이트의 지표면 상태에 따른 RCS 변화를 분석하였다. 지표면 반사파를 구하기 위해 지표면에 대한 PO 반사 계수를 이용하였으며, PO 반사 계수는 지표면 상태 변수인 거칠기와 유전율에 대한 함수이다. 중심 주파수 9.65 GHz에서 지표면 위에 설치된 $10{\lambda}$ 크기 TCR의 RCS 값은 공기 중의 TCR에 비해 0.46 dB 변화가 발생하였고, 이 변화는 지표면의 상태 및 TCR 크기에 따라 크게는 1.55 dB정도의 차이가 날 수 있다. 지표면 영향에 따른 TCR의 RCS 값은 지표면의 거칠기가 작고 유전율이 클수록 크며, 중심 주파수가 낮고 TCR의 크기가 작을수록 크게 발생하였다.

• 농약과학회지
• /
• 제11권2호
• /
• pp.59-66
• /
• 2007

감수성(SBC) 및 저항성(RBC) 잿빛곰팡이병균(Botrytis cinerea)에 대한 N-phenyl-O-phenylthionocarbamate 유도체들의 살균활성에 대한 3차원적인 구조와 활성과의 관계(3D-QSAR)를 CoMFA와 CoMSIA 방법으로 검토하였다. 최적화 된 CoMFA 모델의 예측성과 상관성이 CoMSIA 모델보다 양호하였으며 ($r^2$ 및 $q^2=CoMFA{\gg}CoMSIA$) SBC 균주에 대한 살균활성 모델이 RBC에 대한 모델보다 양호한 통계값 ($r^2=SBC{\gg}RBC$)을 나타내었다. 또한, CoMFA 모델에서는 정전기장보다 입체장이 큰 영향을 미쳤다. CoMSIA 모델에서는 RBC 및 SBC에 대한 살균활성에 관한 CoMSIA장의 영향은 서로 상이하였으나 수소결합 주게장의 영향은 같았다. 통계적으로 양호한 CoMFA 모델에 의하여 두 균주사이 살균활성에 관한 선택성 요소는 입체장의 차이에 기인하는 것으로 판단된다. 그러므로 N-phenyl 고리상 meta 및 para-치환체의 큰 입체장은 SBC에 대한 살균활성을 향상시킬 것으로 예측되었다.

• 한국음향학회지
• /
• 제41권3호
• /
• pp.278-286
• /
• 2022

본 연구에서는 압전세라믹 기반의 상용 Free-Flooded Ring(FFR) 트랜스듀서 대비 소형이면서 저주파 고감도 특성을 확보하기 위해, 높은 압전상수와 전기-기계 결합계수를 가지는 압전단결정 PIN-PMN-PT를 적용한 33-모드 FFR 트랜스듀서를 설계하였다. FFR 트랜스듀서의 광대역 특성을 확보하기 위해 비능동소자를 삽입한 링 구조를 적용하였으며, 3종의 비능동소자 소재 별 특성 해석 결과를 비교하여 최적의 소재를 선정하였다. 링 트랜스듀서의 특성 변화를 최소화하기 위해 오일 충진형 FFR 트랜스듀서로 제작하였으며, 음향시험을 통해 송신감도, 수중 임피던스 및 수평/수직 빔패턴이 해석결과와 잘 일치하는지 확인하였다. 해석 및 시험 결과를 비교한 결과, 송신감도는 공동공진 주파수에서 약 1.3 dB, 구조공진 주파수에서는 약 0.3 dB 차이를 보였다. 또한 상용 트랜스듀서 대비 높은 송신감도를 보유하면서도 직경을 약 17 % 축소하여 제작할 수 있었다. 이를 통해 소형이면서 고출력 특성을 가지는 압전단결정적용 FFR 트랜스듀서의 구현 가능성과 해석을 통한 특성 예측 방법의 유효성을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권8호
• /
• pp.1073-1079
• /
• 2010

Forty-eight ((Duroc${\times}$Yorkshire)${\times}$Landrace) pigs with an average initial body weight (BW) of $48.47{\pm}1.13\;kg$ were used in a 12-week growth trial to investigate the influence of Anion (silicate) supplementation on growth performance, nutrient digestibility, meat quality and fecal noxious gas content in growing-finishing pigs. Pigs were allotted into three dietary treatments in a randomized complete block design according to sex and initial BW. Each dietary treatment consisted of four replications with four pigs per pen. Dietary treatments included: i) CON (basal diet), ii) HCI (basal diet+3 g/kg Anion), iii) HCII (basal diet+6 g/kg Anion). No significant difference (p>0.05) was detected for average daily gain (ADG), average daily feed intake (ADFI) and gain/feed ratio (G/F) throughout the experiment, although dietary supplementation of Anion numerically increased these characteristics compared with CON. The dietary HCI group significantly (p<0.05) increased the coefficient of total tract apparent digestibility (CTTAD) of dry matter (DM), nitrogen (N) and energy compared with the CON group (p<0.05). No significant difference was observed in meat quality except that meat firmness was linearly (p<0.05) increased by the Anion supplementation, while an increased tendency in meat color and a decreased tendency in 2-thiobarbituric acid reactive substances (TBARS) was also observed (p<0.10). Anion supplementation linearly (p<0.05) decreased the fecal $NH_3$ compared with the CON group. However, dietary Anion supplementation at 3 g/kg decreased the $H_2S$ concentration compared with CON, while no significant difference was detected in the HCII group, although the $H_2S$ emission was numerically decreased compared with CON. In conclusion, supplementation of the diet with 3 g/kg Anion was found to exert a beneficial effect on nutrient digestibility and meat quality of growing-finishing pigs, and concomitantly decreased the noxious gas emission without negative effect on growth performance.

• 대한원격탐사학회지
• /
• 제32권6호
• /
• pp.629-637
• /
• 2016

본 연구에서는 2005년부터 2007년 사이에 중국 공업지대에서 Ozone Monitoring Instrument (OMI) 센서에서 관측한 이산화황 값의 증가에 따른 Total Ozone Mapping Spectrometer (OMI-TOMS)와 Differential Optical Absorption Spectrometer (OMI-DOAS) 오존전량 값의 차이를 위성자료를 이용하여 비교를 수행하였다. 중국 공업지대에서는 Planetary boundary layer (PBL)내의 이산화황을 나타내는 PBL $SO_2$ 자료가 사용되었다. 중국 공업지대에서 PBL내의 이산화황 농도 증가에 대하여 두 오존 값의 차이가 증가하는 경향성(R (Correlation coefficient) = 0.36)이 나타났다. 이산화황 이외에 두 오존 산출 알고리즘에 모두 영향을 미칠 수 있는 에어로솔 광학 두께(AOD; Aerosol Optical Depth)가 증가하는 경우 이산화황과 두 오존 값의 차이 사이의 회귀식의 기울기($1.83{\leq}slope{\leq}2.36$)가 비슷하게 유지되는 경향이 나타났다. 이는 다양한 AOD 조건에서도 이산화황이 두 오존 값의 차이를 증가시키는 관계가 나타나는 경향은 거의 비슷하게 유지되는 것으로 생각된다. 중국 공업지대에서 PBL내에 존재하는 이산화황과 화산 폭발에 의하여 고층(Middle troposphere (TRM), Upper troposphere and Stratosphere (STL))에서 존재하는 이산화황의 농도가 1 DU 증가하는 경우 두 오존 값의 차이는 각각 1.6 DU, 3.9 DU, 4.9 DU로 계산되었다. 고층(TRM, STL)의 이산화황과 저층(PBL)의 이산화황이 증가하는 경우 두 오존 값의 차이가 다르게 나타나는 것은 이산화황이 존재하는 고도에 따라서 두 오존 값의 차이에 미치는 영향이 다름을 의미한다. 이는 OMI-TOMS 오존을 산출하는데 사용되는 파장영역(317.5 nm)에서 행성경계층에서 이산화황에 의해 흡수되는 복사휘도의 감소된 민감도에 의한 것으로 생각된다.

• 한국환경보건학회지
• /
• 제48권4호
• /
• pp.227-235
• /
• 2022

Background: Abandoned metal mines are classified as vulnerable areas with the highest level of soil contamination among risk regions. People living near abandoned metal mines are at increased risk of exposure to toxic metals. Objectives: This study aimed to evaluate the correlation between soil contamination levels in areas around abandoned metal mine and the blood lead levels of local residents. Moreover, we assess the possibility of using soil contamination levels as a predictive indicator for human exposure level. Methods: Data from the Survey of Residents around Abandoned Metal Mines (2013~2017, n=4,421) and Investigation of Soil Pollution in Abandoned Metal Mines (2000~2011) were used. A random coefficient model was conducted for estimation of the lower level (micro data) of the local resident unit and the upper level (macro data) of the abandoned metal mine unit. Through a fitted model, the variation of blood lead levels among abandoned metal mines was confirmed and the effect of the operationally defined soil contamination level was estimated. Results: Among the total variation in blood lead levels, the variation between abandoned mines was 18.6%, and the variation determined by the upper-level factors such as soil contamination and water contamination was 8.1%, which was statistically significant respectively. There was also a statistically significant difference in the least square mean of blood lead concentration according to the level of soil contamination (p=0.047, low: 2.32 ㎍/dL, middle: 2.38 ㎍/dL, high: 2.59 ㎍/dL). Conclusions: The blood lead concentration of residents living near abandoned metal mines was significantly correlated with the level of soil contamination. Therefore, in biomonitoring for vulnerable areas, operationally defined soil contamination can be used as a predictor for human exposure level to hazardous substances and discrimination of high-risk abandoned metal mines.

• 정보학연구
• /
• 제8권1호
• /
• pp.43-50
• /
• 2005

Quantitative analysis for distribution of penetrating ultrasound in vivo is very important to determine the treatment region and method. In this paper, we constructed a simplified 2-D femoral region model that consists of skin-fat-muscle-bone layered system, and simulated the pressure distribution in the model in case of applying ultrasound using Finite Element Method(FEM). The ultrasound used in the simulation was assumed to be pulse wave and the pressure distribution was analyzed during only one period of pulse wave. In order to find the penetration depth, amplitude of pressure and sphere that ultrasound reaches in the model, we performed the simulation with varying the applied frequency, transducer size and amplitude of transducer's output. The result showed that applied frequency is inversely proportional to the penetration depth and amplitude of pressure but the amplitude of transducer's output is proportional to the amplitude of pressure in the model. Also, the sphere that ultrasound reaches was widened and the amplitude of pressure became larger as the transducer size became larger. This results were similar to that obtained from the previous model consisting of fat-muscle-bone layered system, but we observed that the pressure of ultrasound is decreased due to the decrements of pressure by the absorption coefficient of skin and the interference that depends on the reflection of ultrasound caused by the difference of acoustic impedance of skin and fat. Finally, we can infer that the model proposed in this study is closer to the realistic model than the previous ones. It shows that the results obtained from this study can be useful in designing the ultrasound treatment instrument or in setting up the treatment plan.

• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.173-180
• /
• 2020

PURPOSE. This study compared digital (reference point matching) and replica methods for measuring marginal and internal fit of full coverage restorations. MATERIALS AND METHODS. A maxillary left first molar typodent was fixed on to an aluminum base and prepared to receive all-ceramic full coverage restoration. The model was scanned with an intraoral scanner (CEREC Omnicam, Sirona, York, PA, USA). Twelve crowns were fabricated from lithium disilicate blocks (IPS emax CAD, Ivoclar Vivadent) and then crystalized. Marginal and internal fit of each restoration was measured by two examiners using replica and a new digital three-dimensional technique. Reliability between the two methods and two examiners was assessed by correlation and Cronbach's Alpha coefficient (P<.05). A Bland-Altman assessment for agreement was used to compare the two methods. RESULTS. Bland-Altman assessment showed that the mean of difference for marginal, absolute marginal, and axial gap was respectively -1.04 ㎛, -41.9 ㎛, and -29.53 ㎛ with limit of agreement (LOA) between -37.26 to 35.18 ㎛ for marginal, -105.85 to 22.05 ㎛ for absolute marginal and -80.52 to 22.02 ㎛ for axial gap. Positive correlation for repeatability (P<.05) in determining marginal and internal gaps by the two examiners in both techniques was revealed. Reliability of both techniques in all sites of measurements was at least good (0.8 ≤ α < 0.9). CONCLUSION. Both measuring techniques appeared highly reliable for evaluating fit of fixed dental restorations, while reference point matching provided higher values in axial and absolute marginal gap assessment.