• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.627-637
• /
• 1985

본 논문에서는 종래의 방법을 개량해서 연소과정의 휘도변화를 전기적신호로 변환시키고, 이 전기신호와 연료분사개시기에 발생하는 전기신호와의 시간차를 시간 간격측정기에 의해 계측하는 방법을 택했다. 이 방법에 의해 측정하고저 하는 온도 또는 연료의 종류별로 매 1,000개의 시간차 데이터를 퍼스널.컴퓨터(personal compu- ter)에 기억시켜 통계처리했다.그리고 착화지연기간의 측정결과에 대해서는 보조연 료로서 사용한 유기화합물의 반응성으로 부터 고찰했다.

• 공업화학
• /
• 제18권3호
• /
• pp.284-290
• /
• 2007

대두유로부터 생산된 바이오디젤과 바이오디젤 혼합 연료유를 대상으로 산화 특성과 지방산메틸에스터 함량 등 화학적 분석을 수행하여 자동차용 연료로서의 품질특성을 파악하였다. 대두유로부터 생산된 바이오디젤은 불포화 지방산인 oleic acid, linoleic acid 및 linolenic acid가 85 wt% 이상 함유되어 있었다. 특히 활성 메틸렌기를 함유한 다불포화 지방산인 linoleic acid와 linolenic acid가 60 wt% 이상 함유되어 있어 상대적으로 자동산화가 쉽게 일어나는 것으로 판단된다. 산화반응시 주요 반응물질은 linoleic acid와 linolenic acid였으며, 이들의 라디칼 자동산화에 의해서 비점이 약 $500^{\circ}C$ 전 후에 있는 탄소수 36 전 후의 고분자 물질이 형성되는 것을 확인하였다

• 에너지공학
• /
• 제15권3호
• /
• pp.139-145
• /
• 2006

The purpose of this study is to obtain low-emission and high-efficiency in LPG engine with hydrogen enrichment. The objective of this paper is to clarify the effects of hydrogen enrichment in LPG fuelled engine on exhaust emission, thermal efficiency and performance. The compression ratio of 8 was selected to avoid abnormal combustion. To maintain equal heating value of fuel blend, the amount of LPG was decreased as hydrogen was gradually added. The relative air-fuel ratio was increased from 0.8 to 1.3, and the ignition timing was controlled to be at MBT (minimum spark advance for best torque)

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.602-605
• /
• 2007

Soybean and rape seed are common feedstocks for biodiesel product ion in USA and Europe, respectively. On the other hand, South Eastern countries like Malaysia and Indonesia have surplus palm crops. However due to substantial amount of saturated fats in palm, the palm biodiesel has poor low temperature properties. To improve the low temperature flow properties as biodiesel, the dependence of the cold filter plugging point (CFPP) on the fatty acid compositions was examined. Two different kinds of biodiesels, palm and soybean biodiesels, were blended with the different volume ratios. And the low temperature flow properties of 0.5%, 1%, and 5% biodiesel in diesel blend fuels was tested. The decrease of CFPP was not observed for BD1 with Palm BD. Also, WDI test didn't exceed in the range of 4oC by the mixing of Palm BD upto 5% in commercial diesels.

• 한국분무공학회지
• /
• 제14권3호
• /
• pp.122-130
• /
• 2009

Vegetable oil and its derivatives as an alternative diesel fuel have become more attractive recently because of its environmental benefits and the fact that they are made from renewable resources. Viscosity is the most significant property to affect the utilization of vegetable oil and its derivatives in the compression ignition engines. This paper presents the existing correlations for predicting the viscosity of vegetable oil and its derivatives for compression ignition engines. According to the parameter considered in the correlations, the empirical correlations can be divided into six groups: correlations as a function of temperature, of proportion, of composition, of temperature and composition, of temperature and proportion, and of fuel properties. Out of physical properties of fuel, there exist in the literature several parameters for giving the influence on kinematic viscosity such as density, specific gravity, the ratio of iodine value over the saponification value, higher heating value, flash point and pressure. The study for the verification of applicability of existing correlations to non-edible vegetable oil and its derivatives is required.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2007년도 추계학술발표회
• /
• pp.133-137
• /
• 2007

An experimental study is conducted to evaluate and compare the use of BiodieseDI Fuel supplements at blend ratio of 10/90(BDF10) and 20/80(BDF20), in four stroke, direct injection diesel engine located at the authors' laboratory. especially this Biodiesel is produced from Rape oil at the authors' laboratory. The tests are conducted using each of the above fuel blends, in the engine working at a speed of 1800rpm and at a various loads. In each test, specific fuel consumption, exhaust emissions such as nitrogen oxides(NOx), carbon monoxide(CO) and Soot are measured. The results of investigation at various operating conditions are as follows (1) Specific fuel consumption is increased average 1.52%, maximum 1.84% at load 25% in case of BDF10, and average 1.98%, maximum 2.80% at load 25% in case of BDF20. (2) CO emission is decreased average 5.14%, maximum 6.09% at load 0% in case of BDF10, and average 7.75%, maximum 9.13% at load 0% in case of BDF 20. (3) NOx emission is increased average 2.97%, maximum 3.74% at load 0% in case of BDF10, and average 3.84%, maximum 4.67% at load 0% in case of BDF20. (4) Soot emission is decreased average 9.36%, maximum 10.85% at load 75% in case of BDF10, and average 11.99%, maximum 13.95% at load 75% in case of BDF20.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.380-389
• /
• 2020

포화지방산 함량이 높은 우지와 불포화지방산 함량이 높은 식물성 유지인 해바라기유를 혼합한 혼합오일의 바이오디젤 전환특성을 규명하고 연료특성을 분석하였다. 다변량분산분석을 이용하여 도출한 기여율로 각 실험변수 (메탄올/유지 몰비, 오일혼합비) 가 바이오디젤 전환에 미치는 영향을 규명하였다. 또한, 바이오디젤의 고점도 문제를 해결하기 위해 가열과 초음파 조사의 방법을 적용하여 동점도 감소효과를 검증하였다. 연료별 온도 도와 동점도간의 상관관계식을 통해 동점도 감소를 위한 연료별 최적 온도를 도출하였다. 그 결과, 바이오디젤 전환율은 오일 혼합비 TASU7, 메탄올/유지 몰비 10에서 가장 우수한 것으로 나타났고 지방산 조성에 따라 연료특성에 차이가 있었다. 또한, 우지, 해바라기유 오일 혼합 바이오디젤의 연료특성 분석 결과 바이오디젤의 품질기준을 만족하는 것으로 나타났다. 바이오디젤의 고점도를 해결하기 위한 동점도 실험 결과 가열 방법의 동점도 감소 효과가 초음파 조사 방법에 비해 우수한 것으로 나타나 간단한 가열장치로 바이오디젤의 고점도를 해결할 수 있음을 확인하였다.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.89-96
• /
• 2016

Growing concerns regarding environmental pollution have increased the demand for green vehicles. Green vehicles include electric vehicles, compressed natural gas vehicles, fuel cell vehicles, and vehicles running on fuels such as bio diesel or an ethanol blend. CNG vehicles are equipped with a cylinder valve installed in a high-pressure vessel to control the CNG flow. For this purpose, the optimum design of cylinder valve solenoid is necessary to secure at driving a CNG vehicle. In this study, electromagnetic field analysis to ensure the reliable operation of the solenoid was conducted by using a Maxwell V15. The electromagnetic field analysis was performed by magnetostatic technique according to distance between magnetic poles in order to predict the attraction force. Finally, the attraction force was validated through comparison between the Maxwell results and the measurement results. From the results, the error of attraction force was found to be 2.85 N to 6.5 N under the testing conditions.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1548-1562
• /
• 2003

This paper is the first of several companion papers which compare the methods of Air-fuel ratio determination. There are many methods which calculate Air-Fuel ratio from exhaust emission. Most of them are based on the simple chemical equations, which use balance of atom, and the error of the calculation is negligible as far as the instrumentation accuracy is guaranteed. They assume homogeneous mixture and complete combustion to the extent of oxygen availability. Because of these simple assumptions, they cannot offer the information about the fuel distribution state and the malfunction of instrument. For these limitations, Eltinge offered new one based on stricter mathematical model. This result coincides with the others very well and gives more information about the mixture state and instrumentation. Consequently this might be a general solution for Air-fuel ratio determination and exhaust composition. The objects of the calculation, however, were not commercial fuels except gasoline and the compensation method of unburned hydrocarbon was not appropriate to recent analyzer. Moreover he did not consider the fuel which contains oxygen, such as methanol, ethanol and blend of gasoline-alcohol. In this paper, Eltinge chart is expanded to the arbitrary fuel composition as the reference exhaust compositions for the purpose of further discussions about Air-fuel ratio determination methods and the charts fur gasoline, diesel, methanol, M85, liquefied petroleum gas(LPG), natural gas(NG), propane, butane are illustrated.

• 에너지공학
• /
• 제24권4호
• /
• pp.33-41
• /
• 2015

DME는 높은 세탄가와 낮은 배출가스로 인하여 청정 디젤엔진 대체연료로 사용될 수 있고, LPG와 물리적 특성이 유사하기 때문에 혼합사용이 가능하다. 본 연구에서는 DME-LPG 혼합연료를 LPG 차량 연료에 적용한 실증평가를 수행하였다. 평가 차량으로는 LPG 연료 공급방식별로 액상연료공급방식(LPLi), 기상연료공급방식(LPGi), 분배식펌프 방식(Mixer type)의 LPG 자동차를 선택하였다. 배출가스(CO, THC, $NO_X$)와 연료소비효율에 대한 영향을 비교하기 위하여 LPG와 DME-LPG 혼합연료에 대한 성능평가를 수행하였다. 차량의 주행거리가 증가함에 따라 DME-LPG 혼합연료를 사용한 차량의 배출가스와 연료소비효율은 LPG 연료를 사용한 경우와 비교해서 동등한 수준으로 평가되었다.