• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.331-336
• /
• 2013

In this paper, plasma modeling is achieved using fluid dynamics, thereby electron density is derived. The way proposes the key to overcoming the limitations of conventional researches which adopt simplified plasma model. The result is coupled with Maxwell-Boltzmann system in order to calculate scattering waves in various incident angle. The first part is dedicated to perform plasma modeling in dielectric barrier discharge(DBD) structure. Suzen-Huang model is adopted among various models due to the fact that it uses time independent variables to calculated potential and electron distribution in static system. The second part deals with finite difference time domain(FDTD) scheme which computes the scattered waves when the modulated Gaussian pulse is incident. Founded on it, radar cross section(RCS) is observed. Consequently, RCS is decreased by 1~2 dB with DBD plasma. The result is analogous to the RCS measurement in other researches.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.290-296
• /
• 2017

In this study, using the surface dielectric barrier discharge (DBD) produced at atmospheric pressure to improve the physiological activities of quercetin was investigated. Quercetin (at 200 ppm) was treated using air DBD with an input power of 250 W. The tyrosinase inhibition effect and total phenolic content of quercetin increased from 38.96 to 91.58% and from 134.53 to 152.93 ppm, respectively, after 20 min of plasma treatment. The antioxidant activity of quercetin treated for 20 min in the lipid models was higher than that of quercetin treated for 0, 5, and 10 min. Furthermore, plasma-treated quercetin exhibited antimicrobial activity against Listeria monocytogenes, Salmonella Typhimurium, and Staphylococcus aureus, whereas activity was not shown in the control. Structural modifications of the quercetin molecule induced by plasma might be responsible for the improvements in its physiological activity. These results indicate that DBD plasma could be used to enhance the physiological activity of quercetin for various applications in food.

• Journal of Environmental Science International
• /
• v.27 no.8
• /
• pp.621-629
• /
• 2018

Many chemically active species such as ${\cdot}H$, ${\cdot}OH$, $O_3$, $H_2O_2$, hydrated $e^-$, as well as ultraviolet rays, are produced by Dielectric Barrier Discharge (DBD) plasma in water and are widely use to remove non-biodegradable materials and deactivate microorganisms. As the plasma gas containing chemically active species that is generated from the plasma reaction has a short lifetime and low solubility in water, increasing the dissolution rate of this gas is an important challenge. To this end, the plasma gas and water within reactor were mixed using the air-automizing nozzle, and then, water-gas mixture was injected into water. The dissolving effect of plasma gas was indirectly confirmed by measuring the RNO (N-Dimethyl-4-nitrosoaniline, indicator of the formation of OH radical) solution. The plasma system consisted of an oxygen generator, a high-voltage power supply, a plasma generator and a liquid-gas mixing reactor. Experiments were conducted to examine the effects of location of air-automizing nozzle, flow rate of plasma gas, water circulation rate, and high-voltage on RNO degradation. The experimental results showed that the RNO removal efficiency of the air-automizing nozzle is 29.8% higher than the conventional diffuser. The nozzle position from water surface was not considered to be a major factor in the design and operation of the plasma reactor. The plasma gas flow rate and water circulation rate with the highest RNO removal rate were 3.5 L/min and 1.5 L/min, respectively. The ratio of the plasma gas flow rate to the water circulation rate for obtaining an RNO removal rate of over 95% was 1.67 ~ 4.00.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.260-260
• /
• 2014

Dermatophytes can invade in keratinized tissues and cause dermatophytosis [1] that rank among the most widespread and common infectious diseases world-wide. Although several systemically and topically administered drugs with activities against these fungi are available, still complete eradication of some of these infections, is difficult and relapses and remissions are often observed [2,3]. In addition, some people are allergic to many of the available drugs which add complications even more. Therefore, the search for novel, selective and more effective therapy is always required and it may help the clinicians to choose the correct treatment for their patients. Non-thermal plasmas primarily generate reactive species and recently have emerged as an efficient tool for medical applications including sterilization. In this study, we evaluated the ability of non-thermal dielectric barrier discharge (DBD) plasma for the inactivation of clinical isolates of Trichophyton genera, Trichophyton mentagrophytes (T. mentagrophytes) and Trichophyton rubrum (T. rubrum), which cause infections of nails and skin and, are two of the most frequently isolated dermatophytes [4]. Our results showed that DBD plasma has considerable time dependent inactivation potential on both T. mentagrophytes and T. rubrum in-vitro. Furthermore, the mechanisms for plasma based T. mentagrophytes and T. rubrum inactivation and planning for in-vivo future studies will be discussed.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.108-113
• /
• 2014

The combined process of Sliding Arc Plasma and corona dielectric barrier discharge process (CDBD) was used to efficiently improve harmful substance, which convert into OH radicals which have strong oxidation potential, and so have deodorization and sterilizing effects, by generating specific radicals and anion and then reacting with the moisture contained in harmful substance. As a result of experiment, even if the size of SAP reactor is reduced from 80 A to 50 A, there is no much change and therefore it is judged the size of reactor may be minimized. And it was confirmed that after the anion and ozone generated from CDBD rector react with harmful substance, a anion was reduced from 510,000 ppb to 470 ppb and ozone from 98 ppb to 22 ppb. It was also judged the stability and durability of plasma producer are excellent. Accordingly, it is considered the harmful substances which exist in indoor air quality will be efficiently improved and removed by using further plasma combined process through this study.

• Journal of Animal Science and Technology
• /
• v.54 no.3
• /
• pp.191-198
• /
• 2012

The objective of this study was to evaluate the potential use of a dielectric barrier discharge (DBD) plasma system to improve microbial safety of sliced cheese. The atmospheric pressure plasma (APP) effect on visual appearance and a sensory evaluation were also carried out. The number of Escherichia coli inoculated on cheese slices decreased by 0.09, 0.47, 1.16 and 1.47 log cycles with helium (4 liters/min [lpm]) and 0.05, 0.87, 1.89 and 1.98 log cycles with He/$O_2$ mixture (4 lpm/15 standard cubic centimeters per minute), after being treated with plasma for 1, 5, 10, and 15 min, respectively. Significant reductions were also observed in Staphylococcus aureus inoculated onto cheese slices ranging from 0.05 to 0.45 log cycles with He and from 0.08 to 0.91 log cycles with He/$O_2$-treated samples, respectively. Adding oxygen resulted in a significant increase in inactivation of both pathogens. No visible change in the plasma-treated cheese slices was observed even though the instrumental analysis showed a significant decrease in the $L^*$-value and an increase in the $b^*$-value. The cheese slices were damaged after 10 and 15 min of plasma treatment. In addition, significant reductions in sensory quality including flavor, odor, and acceptability of plasma-treated cheese slices were observed. The results indicate that the DBD plasma system has potential for use in sanitizing food products, although the effect was limited. Further development of the APP system is necessary for industrial use.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.1
• /
• pp.75-83
• /
• 2020

This study investigated the degradation characteristics and biodegradability of phenol, refractory organic matters, by injecting MgO and CaO-known to be catalyst materials for the ozonation process-into a Dielectric Barrier Discharge (DBD) plasma. MgO and CaO were injected at 0, 0.5, 1.0, and 2 g/L, and the pH was not adjusted separately to examine the optimal injection amounts of MgO and CaO. When MgO and CaO were injected, the phenol decomposition rate was increased, and the reaction time was found to decrease by 2.1 to 2.6 times. In addition, during CaO injection, intermediate products combined with Ca²⁺ to cause precipitation, which increased the COD (chemical oxygen demand) removal rate by approximately 2.4 times. The biodegradability of plasma treated water increased with increase in the phenol decomposition rate and increased as the amount of the generated intermediate products increased. The biodegradability was the highest in the plasma reaction with MgO injection as compared to when the DBD plasma pH was adjusted. Thus, it was found that a DBD plasma can degrade non-biodegradable phenols and increase biodegradability.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.414-419
• /
• 2019

Objectives: The objective of this study was to evaluate the inhibitory effect of non-thermal dielectric barrier discharge (DBD) plasma by air volume against Mycobacterium tuberculosis (MTB). Methods: Plasma generators (TB-300, Shinyoung Airtec, Seongnam-si, Korea) were operated in a 2A type biosafety cabinet. The plasma generator was set to a wind flow rate of 14 ($80m^3/h$), 18 ($110m^3/h$), and 22 ($150m^3/h$), and exposure times were set to 0 hours, 3 hours, 6 hours, 9 hours, and 24 hours. Results: The inhibitory effects of plasma at air volume 14 with prolonged exposure time of three hours was 20%, 64% at six hours, 82.3% at nine hours, and 100% after 24 hours exposure. With air volume of 18, the inhibitory effects upon plasma exposure were 36% for three hours, and 100% from 24 hours. Greater air volume resulted in greater inhibition of tuberculosis bacterial growth. In particular, the maximum inhibitory effect (100%) was shown in air volume of 22 ($150m^3/h$) after three hours of plasma exposure. Conclusions: The results showed the correlating inhibitory effects of plasma on the growth of MTB in combination with increasing plasma exposure time and air volume.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.464-464
• /
• 2012

본 연구에서는 DBD (Dielectric Barrier Discharge)방식을 통해 발생된 대기압 plasma를 이용한 Photoresist (PR) Ashing에 관한 연구를 하였다. 사용된 DBD 반응기는 기존의 blank planar plate 형태의 Power가 인가되는 anode 부분과 Dielectric Barrier 사이 공간을 액상의 도전체로 채워 넣은 형태의 전극이 사용 하였으며, 인가 Power는 40 kHz AC 최대 인가 전압 15 kV를 사용 하였고(본 연구에서 인가 power는 30 KHz,전압 14 KV를 고정시킴) 플라즈마를 발생시 라디칼의 활성화를 유지하기 위해 전극 온도가 $180^{\circ}C$ 정하였다. Feeding 가스는 N2, 반응가스로는 CDA(Clean Dry Air), SF6와 CF4가스를 사용 하였으며 모든 공정은 In-line type으로 시편을 처리 하였다. CDA ratio의 경우에 질소대비 0.2%때 이송속도 30 mm/sec 1회 처리 기존 PR ashing은 최대 $320{\AA}$의 ashing 두께를 얻을 수 있었다. SF6와 CDA가스를 같이 반응하는 경우 ratio는 CDA : SF6 = 0.6% : 0.6%에서 PR ashing rate이 $841{\AA}/pass$의 값을 얻을 수 있었고, CDA가스만 첨가하는 경우보다 약2.6배 증가함을 관찰할 수 있었다. CF4 가스를 사용하는 경우 ratio는 CDA : CF4 = 0.2% : 0.2%에서 PR ashing rate이 $687{\AA}/pass$의 값을 얻을 수 있으며 CDA가스만 첨가하는 경우보다 약 2.1배 증가함을 관찰할 수 있었다. 그리고 PR ashing rate가 가스첨가종류와 비율에 따라서 변화함을 관찰하였고 최적조건을 찾기 위해 연구를 진행하였다. 추후 PR ashing rate가 향상을 하기 위해 가스혼합비율 및 stage 온도등 조건을 조절하여 공정최적조건을 얻기 위해 연구를 진행하였다.

• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.181-188
• /
• 2006

In this study, we analyzed the effects of several process variables on the removal efficiencies of NO and $SO_2$ by the dielectric barrier discharge process combined with photocatalysts. The $TiO_2$ photocatalysts were coated onto the spherical-shaped glass beads as dielectric materials by the dip-coating method to analyze the effects of photodegradation reaction on the NO and $SO_2$ removal. As the voltage applied to the plasma reactor increases, or as the pulse frequency of applied voltage increases, the NO and $SO_2$ removal efficiencies increase. Also as the residence time increases, or as the initial concentration of NO decreases, the NO and $SO_2$ removal efficiencies increase. The higher the amount of $TiO_2$ particles coated onto the glass bead is, the larger the surface area of $TiO_2$ particles for the photodegradation reaction is and the NO and $SO_2$ are removed more quickly by the faster photodegradation reactions.