• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.101.1-101.1
• /
• 2007

• Advances in materials Research
• /
• 제3권2호
• /
• pp.105-116
• /
• 2014

The microwave dielectric properties of $CeO_2$ nanoparticles (0.5, 1.0 & 1.5wt%) doped $Mg_2TiO_4$ (MTO) ceramics have been investigated at cryogenic temperatures. The XRD patterns of the samples were refined using the full proof program reveal the inverse spinel structure without any secondary phases. The addition of $CeO_2$ nanoparticles lowered the sintering temperature with enhancement in density and grain size as compared to pure MTO ceramics. This is attributed to the higher sintering velocity of the fine particles. Further, the microwave dielectric properties of the MTO ceramics were measured at cryogenic temperatures in the temperature range of 6.5-295 K. It is observed that the loss tangent ($tan{\delta}$) of all the samples increased with temperature. However, the $CeO_2$ nanoparticles doped MTO ceramics manifested lower loss tangents as compared to the pure MTO ceramics. The loss tangents of the pure and MTO ceramics doped with 1.5 wt% of $CeO_2$ nanoparticles measured at 6.5K are found to be $6.6{\times}10^{-5}$ and $5.4{\times}10^{-5}$, respectively. The addition of $CeO_2$ nanoparticles did not cause any changes on the temperature stability of the MTO ceramics at cryogenic temperatures. On the other hand, the temperature coefficient of the permittivity increased with rise in temperature and with the wt% of $CeO_2$ nanoparticles. The obtained lower loss tangent values at cryogenic temperatures can be attributed to the decrease in both intrinsic and extrinsic losses in the MTO ceramics.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1292-1299
• /
• 2003

본 논문에서는 MEMS(Micro Electro Mechanical System) 기술을 이용하여 Microstrip 구조의 저 손실 전송라인을 제작하고, 제작되어진 전송라인을 이용하여 Ka-band 대역의 저역통과 여파기(Low Pass Filter)를 제작하였다. 저 손실 전송라인의 제작은 surface micromachining 공정기법을 사용하고 저 손실 및 넓은 범위의 특성 임피던스 값을 얻기 위하여 신호선을 유전체 지지대를 이용하여 공기 중으로 위치시켜 substrate에 의한 손실을 최소화시켰다. 제작된 전송선로를 이용하여 LPF에 적용하면 유전체 손실의 최소화로 인한 insertion loss를 줄일 수 있는 장점이 있다는 것을 확인하였다. 또한 LPF를 다른 능동소자와 함께 구현하기 위하여서는 소형화가 필수적인데 LPF의 소형화를 위하여 접지면 부분에 slot을 형성하여 제작하였으며 제작된 결과를 그렇지 않은 경우와 서로 비교 분석하였다.

• Carbon letters
• /
• 제24권
• /
• pp.62-72
• /
• 2017

The aim of this work was to evaluate the dielectric properties of impregnated and activated palm kernel shells (PKSs) samples using two activating agents, potassium carbonate ($K_2CO_3$) and sodium hydroxide (NaOH), at three impregnation ratios. The materials were characterized by moisture content, carbon content, ash content, thermal profile and functional groups. The dielectric properties were examined using an open-ended coaxial probe method at various microwave frequencies (1-6 GHz) and temperatures (25, 35, and $45^{\circ}C$). The results show that the dielectric properties varied with frequency, temperature, moisture content, carbon content and mass ratio of the ionic solids. PKSK1.75 (PKS impregnated with $K_2CO_3$ at a mass ratio of 1.75) and PKSN1.5 (PKS impregnated with NaOH at a mass ratio of 1.5) exhibited a high loss tangent ($tan{\delta}$) indicating the effectiveness of these materials to be heated by microwaves. $K_2CO_3$ and NaOH can act as a microwave absorber to enhance the efficiency of microwave heating for low loss PKSs. Materials with a high moisture content exhibit a high loss tangent but low penetration depth. The interplay of multiple operating frequencies is suggested to promote better microwave heating by considering the changes in the materials characteristics.

• 폴리머
• /
• 제31권6호
• /
• pp.474-478
• /
• 2007

다이사이클로펜타다이에닐 비스페놀 시아네이트 에스터 올리고머와 열가소성 수지인 폴리페닐렌에테르(PFE)를 복합체화함으로써 유전손실이 적은 고분자 기판소재를 제작하였다. 올리고머와 촉매의 경화반응을 분석하여 최적 촉매첨가량을 Zn 0.02 phr로 선정하고 이를 복합체 제작에 적용하였다. 올리고머와 PPE의 함량비를 변화시키며 제작된 복합체의 동박 박리 강도, gel content 등을 측정하였으며, GHz 대역에서의 유전율과 유전손실을 평가하였다. PPE의 함량은 박리 강도 및 유전특성에 큰 영향을 주었으나, 촉매의 함량에 따라서는 유전특성에 큰 차이가 없었다. 실험결과 박리 강도가 1 kN/m 이상이고, 1 GHz에서 유전손실이 0.004로 낮은 고분자 복합체 라미네이트를 얻을 수 있었다.

• 한국전자파학회논문지
• /
• 제19권10호
• /
• pp.1115-1121
• /
• 2008

본 논문에서는 유전체의 유전 상수를 결정하기 위하여 유전체 슬랩을 원통형 공진기에 삽입하여 측정하는 기술을 제안한다. 유전 상수는 빈 공진기와 유전체 슬랩이 삽입된 공진기의 공진 주파수 편차에 의해 측정된다. 특성 방정식은 정확한 필드 해석에 의해 정의되었다 측정 장치는 HP8719A 벡터 네트웍 분석기와 금속 재질의 원통형 공동 공진기를 이용하였다. 이론적인 증명은 실험과 3D 시뮬레이터인 CST사의 MWS 4.0에 의해 확인되었다. 측정 된 결과는 전반적으로 만족하였다. 측정 된 테플론과 베이클라이트의 비유전율은 각각 2.03과 4.44이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.86-86
• /
• 2009

The $(Na_{0.5}K_{0.5})NbO_3-SrTiO_3$ ceramics were produced by the conventional solid-state sintering method, and their microstructure and electrical properties were investigated. All $(Na_{0.5}K_{0.5})NbO_3-SrTiO_3$ ceramic show dense and homogeneous structure without the presence of the rosette structure. The dielectric constant, loss and remanent polarization of $(Na_{0.5}K_{0.5})NbO_3-SrTiO_3$ ceramics were superior to those of single composition $(Na_{0.5}K_{0.5})NbO_3$

• 한국재료학회지
• /
• 제12권6호
• /
• pp.442-446
• /
• 2002

Design of microwave absorbers using high frequency properties of fiber reinforced composites are investigated. Two kinds of composite materials (glass and carbon) are used and their complex permittivity and permeability are measured by transmission/reflection technique using network analyzer. Low dielectric constant and nearly zero dielectric loss are determined in glass fiber composite. However, carbon fiber composites show the high dielectric constant and large conduction loss which is increased with anisotropy of fiber arrangement. It is, therefore, proposed that the glass and carbon fiber composites can be used as the impedance transformer (surface layer) and microwave reflector, respectively. By inserting the foam core or honeycomb core (which can be treated as an air layer) between glass and carbon fiber composites, microwave absorption above 10 dB (90% absorbance) in 4-12 GHz can be obtained. The proposed fiber composites laminates with sandwitch structure have high potential as lightweight and high strength microwave absorbers.

• 전자공학회논문지A
• /
• 제33A권12호
• /
• pp.33-38
• /
• 1996

In this paper, we modeled the complex dielectric constant and analyzed the projpagation characteristics of a FR-4 composite substrate with different compositions. From the wideband dielectric modeling and the propagation loss analysis of FR-4 composites that consists of FR-4 resin and E-glass reinforcement,we have found that the propagation loss and velocity increase with the volume fraction of FR-4 resin above 1 GHz. These results are helpful in determining to deisgn optimum substrate composition ratio and cross-sectional geometry of high-speed and high-density transmission line.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.7-7
• /
• 2010

The SBN thin films were deposited at substrate temperature of 300[$^{\circ}C$] on Pt-coated electrode (Pt/Ti/$SiO_2$/Si(100)) using RF sputtering method. The grain and crystallinity of SBN thin films were increased with the increase of annealing temperature. The dielectric constant(150) of SBN thin film was obtained by annealing temperature above 750[$^{\circ}C$]. The frequency dependence of dielectric loss showed a value within 0.03 in frequency ranges of 1~1000[kHz].