• 제목/요약/키워드: Die Materials

검색결과 1,275건 처리시간 0.027초

PLCE1 rs2274223 Polymorphism and Susceptibility to Esophageal Cancer: a Meta-analysis

  • Guo, Li-Yan;Yang, Ning;Hu, Die;Zhao, Xia;Feng, Bing;Zhang, Yan;Zhai, Min
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권21호
    • /
    • pp.9107-9112
    • /
    • 2014
  • Purpose: To investigate and study the relationship between the PLCE1 rs2274223 gene polymorphism and susceptibility to esophageal cancer by meta-analysis. Materials and Methods: The literature was searched in Wanfang, CNKI, PubMed, CBM, Web of Science, MEDLINE, EMBASE, Springer, Elsevier and Cochrane databases from the date of January $1^{st}$ 2004 to April $1^{st}$ 2014 to collect case-control studies on the PLCE1 polymorphism and susceptibility to esophageal cancer. For the population genotype distributions of both esophagus cancer and control groups, their odds ratios (ORs) and 95% confidence intervals (CIs) were taken as effect indexes. Disqualified studies were excluded. Odds ratios of PLCE1 rs2274223 genotype distributions in the group of patients with esophageal cancer and the group of healthy control were calculated. The metaanalysis software, RevMan5.0, was applied for heterogeneity test, pooled OR and 95% confidence intervals. Sensitivity analysis and publication bias were also explored. Results: A total of twelve case-control studies were included, covering a total of 9, 912 esophageal cancer cases and 13, 023 controls were included. The pooled odds ratio of PLCE1 rs2274223 genotype GA vs AA was 1.29 (95%CI=1.17~1.43), p<0.01, GG vs AA was 1.65 (95%CI=1.32~2.05), p<0.01, GG/GA vs AA was 1.30 (95%CI=1.16~1.46), p<0.01 and GG vs GA/AA was 1.48 (95%CI=1.22~1.80), p<0.01. The PLCE1 rs2274223 polymorphism was thus associated with risk of esophageal cancer in all genetic models. In the stratified analysis by ethnicity, and source of controls, no significantly increased risk was observed for white persons. There was no obvious publication bias detected. Conclusions: This meta-analysis showed there was a significantly association between PLCE1 rs2274223 polymorphism and esophageal cancer in yellow race populations. Due to some minor limitations, our findings should be confirmed in further studies.

수치해석을 이용한 팬 아웃 웨이퍼 레벨 패키지의 휨 경향 및 신뢰성 연구 (Numerical Analysis of Warpage and Reliability of Fan-out Wafer Level Package)

  • 이미경;정진욱;옥진영;좌성훈
    • 마이크로전자및패키징학회지
    • /
    • 제21권1호
    • /
    • pp.31-39
    • /
    • 2014
  • 최근 모바일 응용 제품에 사용되는 반도체 패키지는 고밀도, 초소형 및 다기능을 요구하고 있다. 기존의 웨이퍼 레벨 패키지(wafer level package, WLP)는 fan-in 형태로, I/O 단자가 많은 칩에 사용하기에는 한계가 있다. 따라서 팬 아웃 웨이퍼 레벨 패키지(fan-out wafer level package, FOWLP)가 새로운 기술로 부각되고 있다. FOWLP에서 가장 심각한 문제 중의 하나는 휨(warpage)의 발생으로, 이는 FOWLP의 두께가 기존 패키지에 비하여 얇고, 다이 레벨 패키지 보다 휨의 크기가 매우 크기 때문이다. 휨의 발생은 후속 공정의 수율 및 웨이퍼 핸들링에 영향을 미친다. 본 연구에서는 FOWLP의 휨의 특성과 휨에 영향을 미치는 주요 인자에 대해서 수치해석을 이용하여 분석하였다. 휨을 최소화하기 위하여 여러 종류의 epoxy mold compound (EMC) 및 캐리어 재질을 사용하였을 경우에 대해서 휨의 크기를 비교하였다. 또한 FOWLP의 주요 공정인 EMC 몰딩 후, 그리고 캐리어 분리(detachment) 공정 후의 휨의 크기를 각각 해석하였다. 해석 결과, EMC 몰딩 후에 발생한 휨에 가장 영향을 미치는 인자는 EMC의 CTE이며, EMC의 CTE를 낮추거나 Tg(유리천이온도)를 높임으로서 휨을 감소시킬 수 있다. 캐리어 재질로는 Alloy42 재질이 가장 낮은 휨을 보였으며, 따라서 가격, 산화 문제, 열전달 문제를 고려하여 볼 때 Alloy 42 혹은 SUS 재질이 캐리어로서 적합할 것으로 판단된다.

In-vitro performance and fracture strength of thin monolithic zirconia crowns

  • Weigl, Paul;Sander, Anna;Wu, Yanyun;Felber, Roland;Lauer, Hans-Christoph;Rosentritt, Martin
    • The Journal of Advanced Prosthodontics
    • /
    • 제10권2호
    • /
    • pp.79-84
    • /
    • 2018
  • PURPOSE. All-ceramic restorations required extensive tooth preparation. The purpose of this in vitro study was to investigate a minimally invasive preparation and thickness of monolithic zirconia crowns, which would provide sufficient mechanical endurance and strength. MATERIALS AND METHODS. Crowns with thickness of 0.2 mm (group 0.2, n=32) or of 0.5 mm (group 0.5, n=32) were milled from zirconia and fixed with resin-based adhesives (groups 0.2A, 0.5A) or zinc phosphate cements (groups 0.2C, 0.5C). Half of the samples in each subgroup (n=8) underwent thermal cycling and mechanical loading (TCML)(TC: $5^{\circ}C$ and $55^{\circ}C$, $2{\times}3,000cycles$, 2 min/cycle; ML: 50 N, $1.2{\times}10^6cycles$), while the other samples were stored in water ($37^{\circ}C/24h$). Survival rates were compared (Kaplan-Maier). The specimens surviving TCML were loaded to fracture and the maximal fracture force was determined (ANOVA; Bonferroni; ${\alpha}=.05$). The fracture mode was analyzed. RESULTS. In both 0.5 groups, all crowns survived TCML, and the comparison of fracture strength among crowns with and without TCML showed no significant difference (P=.628). Four crowns in group 0.2A and all of the crowns in group 0.2C failed during TCML. The fracture strength after 24 hours of the cemented 0.2 mm-thick crowns was significantly lower than that of adhesive bonded crowns. All cemented crowns provided fracture in the crown, while about 80% of the adhesively bonded crowns fractured through crown and die. CONCLUSION. 0.5 mm thick monolithic crowns possessed sufficient strength to endure physiologic performance, regardless of the type of cementation. Fracture strength of the 0.2 mm cemented crowns was too low for clinical application.

레이저 열원을 이용한 보론강 및 핫스탬핑강의 용접특성에 관한 연구 (I) - 핫스탬핑 공정에 사용되는 Al-Si 코팅된 보론강의 레이저 용접특성 - (The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (I) - Laser Weldability of Al-Si Coated Boron Steel Used for Hot Stamping Process -)

  • 김종도;최소영;이수진;서정
    • 대한기계학회논문집A
    • /
    • 제38권12호
    • /
    • pp.1367-1372
    • /
    • 2014
  • 전세계적으로 환경문제에 대한 위기의식이 고조됨에 따라 운송산업 분야에서는 차체경량화를 통해 이와 같은 문제를 해결하고자 하였다. 차체경량화의 방법으로써 보론강을 $900^{\circ}C$이상의 온도에서 가열한 후, 성형과 동시에 냉각하여 1500 MPa 이상의 강도를 얻을 수 있는 핫스탬핑 공정이 제시되고 있다. 하지만 핫스탬핑 공정에 일반적으로 사용되고 있는 보론강의 레이저 용접성에 대한 연구결과는 많지 않다. 따라서 본 연구에서는 보론강의 레이저 용접특성을 조사하기 위해 레이저 매개변수에 대하여 기초적 연구를 실시하였다. 실험결과, 실드가스에 대한 매개변수의 최적의 조건은 $Q=20{\ell}/min$, ${\alpha}=40^{\circ}$, d = 20 mm, l = 0 mm이며, 맞대기 용접부의 경도는 용접부에서 마르텐사이트 형성으로 인해 급격하게 상승하였다.

Aberrant Expression of Markers of Cancer Stem Cells in Gastric Adenocarcinoma and their Relationship to Vasculogenic Mimicry

  • Zhou, Lei;Yu, Lan;Feng, Zhen-Zhong;Gong, Xiao-Meng;Cheng, Ze-Nong;Yao, Nan;Wang, Dan-Na;Wu, Shi-Wu
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권10호
    • /
    • pp.4177-4183
    • /
    • 2015
  • Background: Gastric cancer is the second leading cause of cancer-related death in Asia, and the majority type is gastric adenocarcinoma (GAC). Most GAC patients die of recurrence and metastasis. Cancer stem cells (CSCs) have been thought to be responsible for the initiation, development, metastasis, and ultimately recurrence of cancer. In this study, we aimed to investigate expression and clinical significance of CSCs markers, CD133 and Lgr5, and vasculogenic mimicry (VM) in primary GAC. Materials and Methods: Specimens from 261 Chinese patients with follow-up were analyzed for CD133, Lgr5 protein expression and VM by immunohistochemical and histochemical staining. The Pearson Chi's square test was used to assess the associations among the positive staining of these markers and clinicopathological characteristics. Postoperative overall survival time was were studied by univariate and multivariate analyses. Results: In GAC tissues, positive rates of 49.0%, 38.7%, and 26.8% were obtained for CD133, Lgr5, and VM, respectively. The mean score of microvessel density (MVD) was $21.7{\pm}11.1$ in GAC tissues. There was a significantly difference between the positive and negative groups. There was a positive relationship between the VM, the expression of CD133 and Lgr5, and the score of MVD and the grades of tumor, lymph node metastasis, TNM stages (all p<0.05). The overall mean survival time of the patients with CD133, Lgr5, VM, and MVD (${\geq}22$) positive expression was lower than that of patients with negative expression. The score of MVD, positive expression of CD133 and VM were independent prognostic factors of GAC (p<0.05). Conclusions: VM, and expression of CD133, Lgr5, and the score of MVD are related to grades of tumor, lymph node metastasis, TNM stages, and overall mean survival time. It is suggested that CSCs and VM could play an important role in the evolution of GAC.

기상조건에 따른 방사능테러 시나리오 영향 분석 (Study on Influence Analysis of Radioactive Terror Scenarios by Weather Conditions)

  • 김태우;전여령;장선영;김용민
    • 한국방사선학회논문지
    • /
    • 제12권6호
    • /
    • pp.719-725
    • /
    • 2018
  • 미국 9.11 사고 이후 테러는 과거에 비하여 다중이용시설 공격을 통한 불특정 다수의 공격이 증가하고 있다. 연이은 런던 폭탄테러, 파키스탄의 자폭 등은 사람들의 공포심 및 사회적 불안감을 증가시켰다. 최근 국내에서 다양한 국제행사가 개최되고 있어, 방사능테러 위협에 대비한 방사성물질의 국가 안보 의식이 증대되고 있다. 본 논문에서는 HotSpot Code를 사용하여 서로 상이한 기상조건에 따른 결과를 비교하였다. 국내에서 발생 가능한 테러 시나리오 작성 후, RDD(Radiological Dispersal Device) 및 더티밤에 사용될 가능성이 높은 선원을 조사하였다. 기상조건은 Pasquill-Gifford 안정도 등급에 따라 가장 안정된 조건의 F, 가장 불안정한 조건의 A를 선택하여 비교하였다. 시뮬레이션을 통한 A, F 등급 결괏값은 방사선학적 영향에 의해 시민들이 급성 영향으로 사망하는 경우는 없다고 판단하였다. 또한, 풍속 및 기상 안정도에 따라 방사능의 도달 정도가 서로 다르며, 기상 조건에 따라 방사능 희석정도가 서로 다름을 확인할 수 있다. 분석결과는 방사능테러 발생 시 초동 대응에 활용할 수 있을 것으로 예상된다.

Al-Si-Cu계 합금의 주조법과 용체화처리 조건이 기계적 특성변화에 미치는 영향 (Effects of the Solid Solution Treatment Conditions and Casting Methods on Mechanical Properties of Al-Si-Cu Based Alloys)

  • 문민국;김영찬;김유미;최세원;강창석;홍성길
    • 한국주조공학회지
    • /
    • 제38권6호
    • /
    • pp.111-120
    • /
    • 2018
  • In this study, the effects of two different casting methods (gravity casting and, diecasting) and various solid-solution conditions on the mechanical properties of ASC (Al-10.5wt%Si-1.75wt%Cu) and ALDC12 (Al-10.3wt%Si-1.72wt%Cu-0.76wt%Fe-0.28wt% Mn-0.32wt%Mg-0.9wt%Zn) alloys were investigated. A thermodynamic solidification analysis program (PANDAT) was used to predict the liquidus, solidus, and phases of the used alloys. In the results of an XRD analysis, ${\beta}$-AlFeSi peaks were observed only in the ALDC12 alloy regardless of the casting method or SST (solid-solution treatment) conditions. However, according to the results of a FE-SEM observation, both ${\theta}(Al_2Cu)$ and ${\beta}$-AlFeSi were found to exist besides ${\alpha}$-Al and eutectic Si in the gravity-casted ASC alloy at $500^{\circ}C$ after a SST of 120min. The ${\alpha}$-AlFeSi and ${\beta}$-AlFeSi phases including the eutectic phases were also found to exist in the ALDC12 alloy. The results of a microstructural observation and analyses by XRD, FE-SEM and EDS were in good agreement with the PANDAT results. The gravity-casted ALDC12 and ASC specimens showed the highest Y.S. and UTS values after aging for three hours at $180^{\circ}C$ after a SST at $500^{\circ}C$ for 30min. At longer solid-solution treatment times at $500^{\circ}C$ in the gravity-casted ALDC12 and ASC specimens, the elongations of the ASC alloys increased, whereas they decreased slightly in the ALDC12 alloys.

"증언자료의 비판적 활용 - 6.25전쟁 시기 유격대의 경우" ("Critical Application of Witness Commentaries: The Case of Guerrilla Warfare in the Korean War")

  • 조성훈
    • 기록학연구
    • /
    • 제12호
    • /
    • pp.137-178
    • /
    • 2005
  • The anticommunist guerrillas' activities that aretheconcern of this article took place largely in North Korea or behind the enemy-held lines. Verifying their history is accordingly difficult and requires careful attention, but despite their active operations the military as well as the scholarly community have been lax in studying them. The Korean War came to be perceived as a traditional, limited war with regular battles, so that the studies addressed mostly the regular operations, and guerrilla warfare is remembered as an almost 'exclusive property' of the communist invaders; a small wonder that the anticommunist guerrillas have not been studied much and the collection of materials neglected. Therefore, in contrast with the witness accounts concerning regular battles, witness resources were of a small volume about these "patriots without the service numbers." For the above reasons the guerrilla participants and their later-organized fellowships took to the task of leaving records and compiling the histories of their units. They became active preservers of history in order to inform later generations of their works and also to secure deserved benefits from the government, in a world where none recognized their achievements. For instance, 4th Donkey Unit published witness accounts in addition to a unit history, and left video-recordings of guerrilla witnesses before any institute systematized the oral history of the guerrillas. In the case of Kyulsa ("Resolved to Die") Guerrilla Unit, the unit history was 10 times revised and expanded upon for publication, contributing substantially to the recovery of anticommunist guerrilla history which had almost totally lacked documented resources. Now because the guerrilla-related witness accounts were produced through fellowship societies and not individually, it often took the form of 'collective memory.' As a result, though thousands of former guerrillas remain surviving, the scarcity of numerous versions of, or perspectives upon, an event renders difficult an objective approach to the historical truth. Even requests to verify the service of a guerrilla member or to apply for decoration or government benefits for those killed in action, the process is taken care of not at the hands of the first party but the veteran society, so that a variety of opinions are not available for consideration. Moreover, some accounts were taken by American military personnel, and since some historians, unaware of official documents or evaluation of achievements, tended to center the records around their own units and especially to exaggerate the units' performances, they often featured factual errors. Thefollowing is the means to utilize positively the aforementioned type of witness accounts in military history research. It involves the active use of military historical detachments (MHD). As in the examples of those dispatched by the American forces during the Korean War, experts should be dispatched during, and not just after, wartimes. By considering and investigating the differences among various perspectives on the same historical event, even without extra documented resources it is possibleto arrive at theerrors or questionable points of the oral accounts, supplementing the additional accounts. Therefore any time lapses between witness accounts must be kept in consideration. Moreover when the oral accounts come from a group such as participants in the same guerrilla unit or operation, a standardized list of items ought to be put to use. Education in oral history is necessary not just for the training of experts. In America wherethefield sees much activity, it is used not only in college or graduate programs but also in elementary and lifetime educational processes. In comparison in our nation, and especially in historical disciplines, methodological insistence upon documented evidences prevails in the main, and in the fields of nationalist movement or modern history, oral accounts do not receive adequate attention. Like ancient documents and monuments, oral history also needs to be made a regular part of diverse resource materials at our academic institutes for history. Courses in memory and history, such as those in American colleges, are available possibilities.

니암지대황폐림지(泥岩地帶荒廢林地)의 지피식생(地被植生) 조성방법(造成方法)에 관(關)한 연구(硏究) - 니암특성((泥岩特性)과 조기녹화(早期綠化) - (Studies on the Method of Ground Vegetation Establishment of Denuded Forest Land in the Mudstone Region - The Characteristics of Mudstone and Speeded-up Reforestation -)

  • 정인구
    • 한국산림과학회지
    • /
    • 제19권1호
    • /
    • pp.1-23
    • /
    • 1973
  • 우리나라에서 식물생장(植物生長)이 가장 나쁜 니암지대(泥岩地帶) 황폐림지(荒廢林地)에 지피식생(地被植生)을 조성(造成)시키기 위하여 지피식생(地被植生) 조성시험(造成試驗)을 실시(實施)한 결과(結果)는 다음과 같다. 1. 객토량시험(客土量試驗)에 있어서 객토(客土)는 두께 15cm이상을 하여야만 객토(客土)의 효과(効果)를 인정(認定)할 수있었고, 10cm의 객토(客土)를 하고서도 시비(施肥)를 하지 않으면 생장(生長)이 불량(不良)하여 1cm 객토후(客土後) 비료(肥料)를 충분(充分)히 사용(使用)한 구(區)보다 못하였다. 또 파종혈(播種穴)의 깊이에 있어서 30cm구(區)와 40cm구(區)와는 그 성적차(成績差)를 인정(認定)할 수가 없었다. 식생대피복구(植生袋被覆區)와 무피복구(無被覆區)는 식물(植物)이 발아당시(發芽當時)에는 종자(種子)의 유실여부(流失如否)와 유시(幼時) 생장상(生長上)의 차(差)가 다소(多少)있었으나 가을 성적(成績) 결과(結果)는 차(差)를 인정(認定)할 수 없어서, 이것을 종합(綜合)하여 보면 객토(客土)는 10cm이상(以上)이고 파종혈(播種穴)($30cm{\times}30cm$)당(當) 30g(22:22:11 복비(複肥) 55g)의 시비(施肥)를 하여야 한다. 2. 객토파종별(客土播種別) 시험(試驗)에 있어서 화강암풍화토(花崗巖風化土), 응회암풍화토(凝灰岩風化土), 니암풍화토별(泥岩風化土別) 성적(成績)은 고도(高度)의 유의차(有意差)가 없어고, 각종녹화자재별(各種綠化資材別) 처리(處理)에서도 모연공구(毛筵工區)에서만 1%의 유의차(有意差)를 나타내었다. 이것을 종합(綜合)하면 본 바닥 산록(山麓)의 성취(成就)된 니암풍화토(泥岩風化土)를 객토(客土)로 사용(使用)하는 것이 효과적(効果的)이며 모연공구(毛筵工區)가 좋았다. 3. 니암지대(泥岩地帶)의 임지비암(林地肥岩)임지에는 기존임목(旣存林木)(소나무, 해송)이 1ha당(當) 2,000~3,000본(本) 산재(散在)되어 있으므로 1ah당(當) 22:22:11 복합비료(複合肥料)를 성분량(成分量)으로 110kg을 시용(施用)한 결과(結果) 시비당년(施肥當年)에는 차(差)를 인정(認定)할수 없었으나 다만 엽색(葉色)이 농록색(濃綠色)을 정(呈)하고 엽장(葉長)이 30~40% 더 신장(伸張)하였고 사방오리나무에 있어서 14:37:12 및 9:12:3 복비(複肥)를 본당성분량(本當成分量)으로 20g 구(區)와 40g 구(區)로 나누어 시비(施肥)한 결과(結果) 40g구(區)가 월등(越等)히 생장(生長)이 양호(良好)하였으며 비종간(肥種間)에는 차(差)이를 인정(認定)할수 없었다. 4. 임목(林木)의 근계신장상황(根系伸張狀況)은 소나무는 40년(年)을 자라도 니암(泥岩)을 뚫고 생장(生長)하는 직근신장(直根伸張)은 15cm에 불과(不過)하나 곰솔은 23cm까지 주근(主根)이 신장(伸張)할 수가 있으므로 소나무보다 해송의 직근(直根) 신장력(伸張力)이 강(强)하다. 측근전장(側根全長)은 소나무에서 20m 해송에서 13m이였고, 아까시아나무는 식재당시(植栽當時)에 길이에서 더밑으로 암석을 뚫지 못하고 측근(側根)만 발달(發達)하여 비교적(比較的) 수분(水分)이 보지(保持)되는 소나무밑으로 신장(伸張)하는 것이 통례(通例)이였으며, 니암잔적토(泥岩殘積土)에서는 8~10년(年)만에 고사(枯死)되고 만다. 한편 소나무의 수형(樹型)은 편편상(偏偏狀)인데 해송은 삼각형(三角形)에 수형(樹型)을 이루고 있는 것이 특이하다. 이상(以上)의 사실(事實)을 종합(綜合)하면 인공(人工) 조림시(造林時) 충분(充分)한 식혈(植穴)을 파주지 않으면 임목(林木) 생육(生育)이 어려우므로 충분(充分)한 식혈(植穴)과 비료(肥料)를 시용(施用)하여야만 니암지대(泥岩地帶) 황폐림지(荒廢林地)를 복구(復舊)할수 있을것이다.

  • PDF

완전 지르코니아 크라운의 교합면 두께에 따른 파절강도의 비교 연구 (Comparative study of fracture strength depending on the occlusal thickness of full zirconia crown)

  • 장수아;김윤영;박원희;이영수
    • 대한치과보철학회지
    • /
    • 제51권3호
    • /
    • pp.160-166
    • /
    • 2013
  • 연구 목적: 본 연구의 목적은 전통적인 금속도재관과 완전 지르코니아 크라운의 교합면 두께에 따른 파절강도를 비교하는 것이다. 연구 재료 및 방법: 하악 제1대구치에 해당하는 레진치를 교합면 1.5 mm, 변연은 1.0 mm 폭의 rounded shoulder로 하고 축면 경사각이 $6^{\circ}$가 되도록 삭제하여 금속 다이 64개를 제작하였다. 완전 지르코니아 크라운은ZIRKONZAHN CAD/CAM을 이용하여 Prettau zirconia blanks를 절삭하여 48개의 크라운을 제작하고 교합면 교두정의 두께에 따라 6개 군으로 분류하였다(0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm). 16개의 금속도재관을 제작하여 교합면 교두정 도재의 두께에 따라 2개 군으로 분류하였다(1.0 mm, 1.5 mm). 완성된 완전 지르코니아 크라운과 금속도재관은 만능시험기 상에서 치아 교합면에 수직으로 하중이 가하도록 하여 파절강도를 측정하였다. One-way ANOVA, Tukey multiple comparison test (${\alpha}=.05$)와 t-test (${\alpha}=.05$)로 검정하였다. 결과: 본 연구의 결과는 다음과 같다. 1. 실험 1군은 가장 낮은 값(646.48 N)을 나타내었고(P<.05), 실험 2, 3, 4, 5군은 교합면의 두께가 증가할수록 파절강도는 증가하였지만 (866.40 N, 978.82 N, 1196.82 N, 1222.41 N) 통계적으로 유의한 차이를 나타내지 않았다(P>.05). 실험 6군은 다른 군보다 통계적으로 유의하게 가장 높은 값(1781.24 N)을 나타내었다(P<.05). 2. 대조군의 파절강도는 도재의 두께가 1.0 mm와 1.5 mm일때각각2515.71 N, 3473.31 N이며 이는 통계적으로 유의한 차이를 나타내지 않았다(P>.05). 결론: 완전 지르코니아 크라운은 대구치부에서 최대교합력보다 높은 파절강도를 갖기 위해서는 1.0 mm이상의 두께가 필요하다.