• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.124-131
• /
• 2008

There are many factors which affect the acoustical properties of a micro-speaker. Among the factors, the shape of the diaphragm is considered in this study. As an investigating method, the finite element methods and measurement techniques applied to study the acoustical properties according to diaphragm shape. In order to vary the stiffness of the diaphragm, the some patterns of comb teeth, such as the angle and the number of comb teeth, are applied to diaphragm. We can confirm that the change of the stiffness by the changing diaphragm shape affects the vibration and sound properties of the speaker. As a result, the reduction of the angle of the comb teeth increases the diaphragm stiffness and shifts the resonance frequency to a higher frequency range. The number of the comb teeth is related to the stiffness of the edge part.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.551-554
• /
• 2005

This study uses a characteristic function to explain correlations between the objective function and design variables. Analysis of means and table of orthogonal array were carried out. The change of shape of diaphragm, thickness of diaphragm and voice coil weight based on the table of orthogonal array is made. Therefore this study carried to decide shape of diaphragm, voice coil weight and thickness of diaphragm for minimizing 1st natural frequency and maximizing 2nd natural frequency of diaphragm using design of experiments and characteristic function with constraints. we showed improved design factors that minimized 1st natural frequency and maximized 2nd natural frequency of diaphragm.

• 한국소음진동공학회논문집
• /
• 제15권7호
• /
• pp.775-780
• /
• 2005

This study uses a characteristic function to explain correlations between the objective function and design variables. Analysis of means and table of orthogonal array were carried out. The change of shape of diaphragm, thickness of diaphragm and voice coil weight based on the table of orthogonal array Is made. Therefore this study carried to decide design variables for minimizing 1st natural frequency and maximizing 2nd natural frequency of diaphragm using design of experiments and characteristic function with constraints. we showed improved design variables.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권1호
• /
• pp.205-215
• /
• 2006

본 연구는 3차원 쉘요소를 이용한 유한요소해석을 통해 다이아프램으로 보강된 곡선 강박스거더교의 거동을 분석하였다. 매개변수연구를 통해 기존의 제안식과 비교함으로써 모델링의 타당성을 검증하였고, 뒤틀림 응력에 크게 영향을 미치는 인자는 중심내각, 지간길이, 다이아프램간격임을 확인하였다. 또한, 다이아프램의 간격, 개구율, 형상을 변수로 하여 해석한 결과에서는 지간이 30m, 곡률 반경이 40m인 해석모델에 대한 적정 다이아프램간격은 5m인 것으로 나타났다. 다이아프램의 형상 효과에 대해서는 라멘식 다이아프램의 경우가 개구율 0.4~0.6의 범위에서 개구부가 없는 충복판식 다이아프램보다 휨과 뒤틀림의 응력비가 낮아 거동에 유리한 것으로 나타났으며, 충복판식 다이아프램과 X형 트러스 방식의 다이아프램 비교에서는 동일한 강성을 가지더라도 충복판식 다이아프램이 뒤틀림응력을 보다 효과적으로 제어하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제10권3호
• /
• pp.27-33
• /
• 2013

Solenoid valve has used in various industrial field extensively. A solenoid valve has different size, shape and method of operation accordantly to industrial field. Many researchers study on kinds of solenoid valve such as flow rate, dynamic, magnetic field, valve shape and operating method. But the flow rate characteristic and dynamic response time performance on the diaphragm valve are not studied. This paper describes the flow rate characteristic and dynamic response time performance on the diaphragm valve. At first, the diaphragm valve is simulated in AMESim simulation tool. AMESim model found that an effect of valve performance depends on parameter. The parameter is the diaphragm orifice area. And the performance test bench confirms the effect in this parameter. Finally, it finds out the flow rate characteristic and dynamic response time performance on the diaphragm valve.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.640-644
• /
• 2010

Information technology devices, such as cellular phones, MP3s and so on, due to restrictions of space, require thin and small micro-speakers to generate sound. The reduction of the size of micro-speakers has resulted in the decrease of sound quality, due to such factors as frequency range and sound pressure level. In this study, the acoustical properties of oval microspeakers has been studied as a function of pattern shape on the diaphragm. The other conditions of micro-speakers, except for the pattern, was not changed. When the pattern is present on the diaphragm and the shape of pattern was a whirlwind, the resonance frequency was reduced due to the decrease of tensile strength of diaphragm. The patterns presented in the semi-minor axis of diaphragm did not effect a change of resonance frequency. However, increasing the number of patterns in the semimajor axis of diaphragm became a reason for the decrease of resonance frequency on edge side. When the depth of pattern on edge side was increased, the resonance frequency was decreased due to reduction of geometrical stiffness. If the height of edge and dome were increased, the resonance frequency and geometrical stiffness rapidly increased. After reaching the maximum values, they began to decrease with the continuous increase of height.

• 한국강구조학회 논문집
• /
• 제27권3호
• /
• pp.289-298
• /
• 2015

CFT 구조는 각형이나 원형강관에 콘크리트가 충전된 구조로서, 강관은 콘크리트를 구속하고 콘크리트는 강관의 좌굴을 방지함으로써 부재의 강성 및 강도를 증가시킬 수 있다. 이에 본 연구는 관통 다이아프램 충전개구부 형상이 각형CFT 기둥-보 접합부의 내력에 미치는 영향을 실험을 통해 확인한 후, 유한요소해석을 수행하여 실험 결과와 비교 검증했다. 이로써 각형CFT 기둥-보 접합부의 내력은 관통 다이아프램의 개구부 면적이 같을 경우 그 형상에 크게 영향을 받지 않으며, 관통 다이아프램과 보 플랜지의 접합부분 형상 및 치수가 동일하면, 보에 발생한 휨응력이 다이아프램을 통해 기둥으로 전달되고 있음을 확인하였다.

• 센서학회지
• /
• 제30권5호
• /
• pp.273-278
• /
• 2021

Here, we studied the change in the mechanical stiffness of a diaphragm according to the corrugation pattern. The diaphragm consists of a silicon oxide and nitride double layer; a corrugation pattern was formed by dry etching, and the diaphragm was released by wet etching. The fabrication of the thin film was verified using focused ion beam and scanning electron microscopy images. The mechanical stiffness of the diaphragm was obtained by measuring the surface vibration using a laser Doppler vibrometer while applying external sound pressure. Flat squares, diaphragms with square corrugations, and circular corrugation patterns were measured and compared. The stiffness of the diaphragm with a corrugation structure was found to be smaller than that without a corrugation structure; in particular, circular corrugation showed a better effect because of the high symmetry. Furthermore, the effect of corrugation was theoretically predicted. The proposed corrugated diaphragm showed comparable flexibility with the state-of-the-art MEMS microphone diaphragm.

• 한국공간구조학회논문집
• /
• 제12권4호
• /
• pp.81-90
• /
• 2012

The concrete-filled tube (CFT) column has the excellent structural performance. But it is difficult to connect with column and beam because of closed section. Its Solution, 2 members of ㄷchennel in which Internal diaphragm is installed were welded beforehand and the method of making Rectangular Steel Tube was proposed. According to upside and downside junction shape, Internal diaphragm suggested as symmetric specimen and asymmetric specimen. The upper and lower diaphragm of the Symmetric specimen used the same horizontal and The upper diaphragm of the Asymmetric specimen used the horizontal plate and the lower diaphragm used the vertically plate. In this research, 4 T-shape column to beam steps connections were tested with cyclic loading experiment in order to evaluate the structural capability of the offered connection. Symmetric specimens be a failure in 0.03rad from beam flange. And Asymmetric specimens be a failure in 0.05rad from column interface. The comparison results of All specimens shown similar to energy absorption capacity in 0.02rad.

• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.55-59
• /
• 2018

본 연구에서는 Si/$SiO_2$/Si-sub 구조의 SDB (silicon-direct-bonding) 웨어퍼 상에 형성된 다이아프램(diaphragm)에 제조된 전단응력형 압전저항 특성을 분석하였다. 다이아프램은 MEMS (Microelectromechanical System) 기술을 이용해 형성하였다. TMAH 수용액을 이용해 웨이퍼 후면을 식각하여 형성된 다이아프램 구조는 각종 센서제작에 활용할 수 있다. 본 연구에서는 다이아프램 상에 형성시킨 전단응력형 압전저항의 최적의 형상조건을 ANSYS 시뮬레이션을 통하여 찾고 실제 반도체 미세가공기술을 이용해 다이아프램 구조를 형성시키고 이에 붕소(boron)을 주입하여 형성시킨 전단응력형 압전저항의 특성을 시뮬레이션 결과와 비교 분석하였다. 압력감지 다이아프램은 정방형으로 제조되었다. 다이아프램의 모서리의 중심부에서 동일한 압력에 대한 최대 전단응력은 구조물이 정방형일 때 발생한다는 것을 실험으로 확인할 수 있었다. 따라서 압전저항은 다이아프램의 가장자리 중앙에 위치시켰다. 제조된 전단응력형 압전저항은 시뮬레이션 결과와 잘 일치하였고 $2200{\mu}m{\times}2200{\mu}m$ 크기의 다이아프램에 형성된 압전저항의 감도는 $183.7{\mu}V/kPa$로 나타났으며 0~100 kPa 범위의 압력에서 1.3%FS의 선형성을 가졌으며 감도의 대칭성 또한 우수하게 나타났다.