• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.551-554
• /
• 2005

This study uses a characteristic function to explain correlations between the objective function and design variables. Analysis of means and table of orthogonal array were carried out. The change of shape of diaphragm, thickness of diaphragm and voice coil weight based on the table of orthogonal array is made. Therefore this study carried to decide shape of diaphragm, voice coil weight and thickness of diaphragm for minimizing 1st natural frequency and maximizing 2nd natural frequency of diaphragm using design of experiments and characteristic function with constraints. we showed improved design factors that minimized 1st natural frequency and maximized 2nd natural frequency of diaphragm.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.640-644
• /
• 2010

Information technology devices, such as cellular phones, MP3s and so on, due to restrictions of space, require thin and small micro-speakers to generate sound. The reduction of the size of micro-speakers has resulted in the decrease of sound quality, due to such factors as frequency range and sound pressure level. In this study, the acoustical properties of oval microspeakers has been studied as a function of pattern shape on the diaphragm. The other conditions of micro-speakers, except for the pattern, was not changed. When the pattern is present on the diaphragm and the shape of pattern was a whirlwind, the resonance frequency was reduced due to the decrease of tensile strength of diaphragm. The patterns presented in the semi-minor axis of diaphragm did not effect a change of resonance frequency. However, increasing the number of patterns in the semimajor axis of diaphragm became a reason for the decrease of resonance frequency on edge side. When the depth of pattern on edge side was increased, the resonance frequency was decreased due to reduction of geometrical stiffness. If the height of edge and dome were increased, the resonance frequency and geometrical stiffness rapidly increased. After reaching the maximum values, they began to decrease with the continuous increase of height.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.298-302
• /
• 2002

Equivalent volume estimation of the coupler and two coupled microphones has a key role in standard microphone pressure calibration. The equivalent volume of the microphone is determined by the dynamic characteristics of the diaphragm system and front cavity. Therefore the modal parameters of diaphragm system - natural frequency and damping fatter - should be measured explicitly for the estimation of the equivalent volume. The diaphragm system is composed of the vibrating diaphragm, back slit behind diaphragm, pressure equalization vent, and front cavity which are acoustically coupled. In the measurement, the electrostatic actuator was used to excite the system with the swept sine, and the frequency response was obtained. The close actuator in front of the diaphragm must influence the radiation impedance of the system, and then the modal parameters. From the measured frequency response, the natural frequency and the damping factor could be estimated with the Complex exponential method based on the Prony model and the zero crossing real and imaginary plot.

• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.124-131
• /
• 2008

There are many factors which affect the acoustical properties of a micro-speaker. Among the factors, the shape of the diaphragm is considered in this study. As an investigating method, the finite element methods and measurement techniques applied to study the acoustical properties according to diaphragm shape. In order to vary the stiffness of the diaphragm, the some patterns of comb teeth, such as the angle and the number of comb teeth, are applied to diaphragm. We can confirm that the change of the stiffness by the changing diaphragm shape affects the vibration and sound properties of the speaker. As a result, the reduction of the angle of the comb teeth increases the diaphragm stiffness and shifts the resonance frequency to a higher frequency range. The number of the comb teeth is related to the stiffness of the edge part.

• 한국재료학회지
• /
• 제21권7호
• /
• pp.403-409
• /
• 2011

Micro speakers are used to reproduce sound in small electric and information and communications devices, such as cellular phones, PMPs, and MP3 players. The acoustical properties and sound quality, which are changed due to the decreased size of the speaker, are often adjusted varying the type and thickness of the diaphragm. The most widely used diaphragm material is thin polymer. It was previously reported by the author of this paper that the resonance frequency of a micro speaker is changed by the type and thickness of a polymer diaphragm. In this paper, the frequency response near the resonance frequency of a micro speaker was studied as functions of the type and thickness of the polymer diaphragm. While $R_{max}$ and $R_{DC}$ were affected by the type and thickness, an analysis of the electrical impedance curve revealed that $R_o(= R_{max}/R_{DC})$ and ${\Delta}f$ were not changed. Thus, $Q_{TS}$ which was function of $R_o$, ${\Delta}f$, and the resonance frequency, is only related to the resonance frequency. The increase of the resonance frequency led to a proportional rise of $Q_{TS}$. The change of the frequency response near the resonance frequency was not dependent on the type or thickness of the polymer diaphragm, but was affected by the resonance frequency.

• 전력전자학회논문지
• /
• 제16권3호
• /
• pp.258-265
• /
• 2011

본 논문은 다이어프램의 공기압력을 제어하기 위한 가변 주파수 전류 제어기를 제안한다. 제안된 제어기는 기존의 다이어프램의 공기압력을 제어하는 방법과는 달리 단상 인버터를 이용하여 상 전류와 주파수를 제어한다. 한 상의 전류는 다이어프램의 지령 공기 압력을 추종하도록 조절되고, 전류 주파수는 기계적인 진동을 줄이기 위해 변화한다. 일정한 공기압력으로 부드럽게 변화하기 위해서 전류 주파수는 전류 제어기에서 제어전압에 따라 제어되며, 이 때의 상전류가 일정한 공기압력에 만족하게 되면 전류주파수는 다이어프램의 진동을 줄이기 위해 증가된다. 제어 전압에 의한 상 전류가 지령값보다 높게 되면 전류 주파수는 공기압력을 추종하기 위해 감소된다. 제안된 제어방식은 상용 다이어프램을 이용한 실험을 통해 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.763-766
• /
• 2004

Recently, various acoustic artifacts that contains speaker have been produced such as cellular phone. Speaker consists of diaphragm generating sound and coil vibrating diaphragm. Generally, good speaker means that it has a wide frequency range, high output power rate to input power and flat sound pressure level in specified frequency range. Acoustic characteristic was estimated through the experiment and computer simulation, or sound power was controlled with acoustic sensitivity in a natural frequency range fer last decade. However, the flatness of sound pressure level has not been considered to enhance the sound quality of a speaker. Tn this study, a method for speaker design is proposed for a good acoustic characteristic, which is flatness of SPL(sound pressure level) and wideness between the first and second natural frequency. SYSNOISE is used fer acoustic analysis and ANSYS is used for harmonic response analysis and modal analysis. Optimization for acoustic characteristics of a speaker diaphragm is performed using ModelCenter. All analyses are done within a frequency domain. And we confirm that the experimental and computational simulations have similar trend.

• 한국음향학회지
• /
• 제25권5호
• /
• pp.222-228
• /
• 2006

본 연구에서는 마이크로스피커에 사용되는 진동판의 재질에 따른 음향특성을 연구하였다. 진동판의 재료가 달라지면 영률과 밀도가 바뀌게 되고, 그로 인하여 재질에 따라서 음속과 스티프니스 값이 변하게 된다. 그 결과로써, 공명진동 수는 PEl, PPS, PET, PEN의 순서로 점차 높게 나타났으며, 이는 이론적으로 예측된 결과와 정확히 일치하였다. 진동판의 재질은 저음으로부터 최저공명진동수 ($f_s$)까지 음압이 증가하는 변화율이나 최고한계공명진동수 ($f_h$)에는 영향을 주지 않았다. 그러나 임피던스 특성에서 얻어진 공명진동수가 낮은 재질의 순서대로 저음영역이 강하게 나타났다.

• 한국소음진동공학회논문집
• /
• 제15권7호
• /
• pp.775-780
• /
• 2005

This study uses a characteristic function to explain correlations between the objective function and design variables. Analysis of means and table of orthogonal array were carried out. The change of shape of diaphragm, thickness of diaphragm and voice coil weight based on the table of orthogonal array Is made. Therefore this study carried to decide design variables for minimizing 1st natural frequency and maximizing 2nd natural frequency of diaphragm using design of experiments and characteristic function with constraints. we showed improved design variables.

• 한국안광학회지
• /
• 제6권1호
• /
• pp.13-29
• /
• 2001

주기적으로 변하는 압력이 loose 또는 tight fitting 상태의 콘택트렌즈와 같은 diaphragm에 작용하여 진동이 발생하는 경우 diaphragm의 가장자리(edge)는 단순지지(simply supported) 또는 고정(rigidly clamped) 상태로 가정할 수 있으며, 이러한 가정하에 diaphragm의 진동을 해석할 수 있는 미분방정식과 그 해를 구하는 컴퓨터 프로그램을 작성하였으며 이 컴퓨터 모델을 사용하여 진폭 및 출력을 예측하고 diaphragm의 반경 및 두께, damping, 작용하는 압력의 진동수 등 제반 변수가 진동에 미치는 영향을 모사하였다. 외부 압력의 진동수가 어떤 범위 이상에서는 diaphragm의 파형은 한 개의 peak를 가지는 원호형에서 2개의 peak를 가지는 파도형으로 전환되며 이 때 진동수가 증가함에 따라 diaphragm의 바깥 부분의 peak가 안쪽 peak보다 높아지는 것을 알 수 있다. 이러한 경향이 시작되는 진동수는 diaphragm의 가장자리가 단순지지된 경우가 clamped 된 경우보다 훨씬 낮다. 단순지지된 diaphragm의 진동은 고정단 진동에 비하여 기본 공진(fundamental resonance)이 월등히 낮은 진동수에서 발생하며, 따라서 저주파 영역에서는 진동수가 낮아질수록 두 진동간의 진폭차가 커지지만 고주파 영역에서는 그 차이가 미미하게 된다. 또한 단순지지 diaphragm의 진동의 특징은 진동수의 증가에 따라 여러개의 공진(harmonics)이 발생하지만 전체적으로 진폭은 급격하게 감소한다. 그러나 저주파 영역에서 단순지지 진동의 진폭이 크다고 해도 출력은 낮기 때문에 diaphragm의 진동에 따른 출력(power)은 특정 진동수에서 하나의 주 peak를 갖는다. 단순지지된 diaphragm이 진동할 때 diaphragm의 출력 공진진동수는 두께가 증가할수록 감소한다. 이 경우 형성되는 harmonics의 출력은 기본공진의 강도에 비해 현저하게 떨어지는 것이 진폭의 경우와 대조적이다.