• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.36-36
• /
• 1999

• Journal of the Korean Ceramic Society
• /
• v.32 no.6
• /
• pp.697-702
• /
• 1995

The rough growth surfaces of diamond films fabricated by the hot filament CVD were polished using thermomechanical polishing method. And then, its application to the optical windows was discussed through the measurement of transmittance in the range of infrared radiation and analysis of surfaces structure. The results were compaerd with those of the films polished with conventional mechanicla polishing. The transmittance of the mechanically polished film reached 57~66% over the whole range from 500 to 4000 cm-1. But the transmittance of the film polished with thermomechanical polishing method was reduced below 35%. This decrease in transmittance was due to both the graphitization of diamond on the polished surface and the growth of $\beta$-SiC at diamond/Si interface during polishing. The residual Fe in hte thermomechanically polished surface was confirmed by SIMS analysis. This Fe played the role of the graphitization of near surface region of the diamond film.

• Vacuum Magazine
• /
• v.2 no.4
• /
• pp.16-26
• /
• 2015

Carbon nanomaterials including nanocrystalline diamond and graphene films are expected to play a core role in $21^{st}$ century industries due to their amazing physicochemical properties. To achieve their practical utilization and industrialization, the development of their mass production technologies is strongly required. Recently, a surface wave excited plasma (SWP) which is produced using microwaves has been attracting special attentions as a candidate for the mass production technology of carbon nanomaterials. SWP can allow a low-temperature large-area plasma chemical vapor deposition (CVD) system. Here, this article introduces the promising SWP-CVD technology. Plasma characteristics in a SWP will be introduced in detail to help understanding how to use and control a SWP as a plasma source for CVD applications.

• The Korean Journal of Ceramics
• /
• v.3 no.1
• /
• pp.5-12
• /
• 1997

Charged carbon clusters which are formed by the gas activation are suggested to be responsible for the formation of the metastable diamond film. The number of carbon atoms in the cluster that can reverse the stability between diamond and graphite by the capillary effect increases sensitively with increasing the surface energy ratio of graphite to diamond. The gas activation process produces charges such as electrons and ions, which are energetically the strong heterogeneous nucleation sites for the supersaturated carbon vapor, leading to the formation of the charged clusters. Once the carbon clusters are charged, the surface energy of diamond can be reduced by the electrical double layer while that of graphite cannot because diamond is dielectric and graphite is conducting. The unusual phenomena observed in the chemical vapor deposition diamond process can be successfully approached by the charged cluster model. These phenomena include the diamond deposition with the simultaneous graphite etching, which is known as the thermodynamic paradox and the preferential formation of diamond on the convex edge, which is against the well-established concept of the heterogeneous nucleation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.3
• /
• pp.224-230
• /
• 2007

This work is aimed to explore a possibility of using the generalized Lamb waves for nondestructive evaluation of the bonding quality of layered substrates. For this purpose, we prepared two sets of specimens with imperfect bonding at their interfaces; 1) TiN-coated specimens with various wear conditions, and 2) CVD diamond specimens with various cleaning conditions. A dispersion simulation performed for layered substrates with imperfect interfaces are carried out to get the characteristics of dispersion curves that can be used for bonding quality evaluation. Then the characteristics of dispersion curves of the fabricated specimens are experimentally determined by use of an ultrasonic backward radiation measurement technique. The results obtained in the present study show that the lowest velocity mode (Rayleigh-like) of the generalized Lamb waves are sensitively affected by the bonding quality. Therefore, the generalized Lamb waves can be applied for nondestructive evaluation of imperfect bonding quality in various layered substrates.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.305-305
• /
• 2015

알루미늄 방열판 위에 MPCVD(Microwave Plasma Enhanced Chemical Vapor Deposition) 장치를 이용하여 DC 바이어스 전압을 기판에 인가하면서 $Ar+CH_4$ 가스 분위기에서 증착한 나노결정질 다이아몬드(Nanocrystalline Diamond; NCD) 박막의 방열 특성을 평가하였다. XRD와 Raman spectroscopy를 이용하여 증착된 박막이 NCD인지를 확인하였으며 FE-SEM 및 FIB로 박막의 표면 및 단면의 형상을 관찰하였다. 다이아몬드가 증착된 방열판에 LED를 부착하여 발열시키고 열유동측정기의 하나인 T3-ster를 사용하여 방열 특성을 분석하였다. 기존 알루미늄(Al) 기판(5.55 K/W)보다 다이아몬드 증착(Dia-Al) 기판(3.88 K/W)의 열저항 값이 현저히 작았다, 또한 LED 접합온도는 Dia-Al 기판이 Al 기판보다 약 $3.5^{\circ}C$만큼 낮았다. 적외선 열화상 카메라로 발열 중인 시편의 전면과 후면을 촬영한 결과, LED가 부착된 전면부에서는 최고 발열 부위(hot spot)의 면적이 Al 기판의 경우가 Dia-Al 기판보다 높았고, 후면부에서는 그 반대의 경향을 보였다. 이들 데이터로부터 다이아몬드 증착 방열판이 기존의 방열판보다 방열특성이 우수한 것으로 해석할 수 있으며, 다이아몬드 박막을 방열판으로 사용하면 LED의 사용 수명과 효율이 높아질 것으로 기대된다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.368-376
• /
• 2003

In this research, DLC thin films are produced as several hundred nm thickness by PE-CVD method. And then these thin films are estimated tribological characteristics to find out useful possibilities as a protecting film for high-quality function and life extension at MEMs by mechanical properties observation . These are measured thickness and residual stress of DLC coating. Compared after measuring friction coefficient, adhesion force, hardness, cohesive force of coating films. As results all test, we can decide several conclusions. First, friction coefficient decreased, as the load increased. otherwise, friction coefficient increased, as thickness of coating film increased under low load$(1\~50mN)$. Secod, adhesion force increased as thickness of coating films. Third, hardness of coating film is affected by substrate coating film when it is less than thickness of 300nm and it has general hardness of DLC coating film when it is more than thickness of 500nm. Fourth, cohesive force of coating film is complexly affected by hardness, adhesion force, residual stress, etc.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.303-303
• /
• 2012

Diamond-like carbon (DLC)은 낮은 마찰력과 높은 내마모성 및 내식성등과 같은 우수한 물성을 가지고 있다. 따라서, DLC 박막은 다양한 응용분야에 적용이 가능한 코팅이다. 특히, DLC 박막의 낮은 마찰력과 고경도 특성은 자동차 산업 및 금형과 같은 저마찰 및 내마모성 향상에 기여할 수 있는 매력적인 박막 코팅으로 각광받고 있다. 그러나 DLC 박막의 높은 잔류응력과 다른 기판의 화학적 친화력을 감소시키는 탄소-탄소 결합의 불안정성 때문에 금속소재와의 낮은 접합력으로 인하여 그 응용에 어려움을 격고 있다. DLC 박막의 접합력 향상을 위하여 모재에 활성 스크린 플라즈마 질화 장비를 사용하여 금속 시편에 질화처리를 하였다. 질화처리후 CVD법으로 DLC 박막을 증착하였으며, 박막의 특성은 나노 인덴테이션, 마이크로 라만 스펙트로스코피 그리고 주사전자현미경에 의해 측정되었다. 활성 스크린 질화 장비에 의해 처리된 시편의 특성변화는 GDS, XRD 및 마이크로 비커스 경도계를 이용하여 관찰하였다. 박막과 모재와의 밀착력은 스크래치 테스트에 의해 측정 하였으며, 질화층이 형성됨으로 인해 모재의 상구조와 경도의 변화가 생겼고, 이로 인해 DLC박막과 모재의 밀착력이 상승하였음을 알 수 있었다.

• The Korean Journal of Ceramics
• /
• v.3 no.3
• /
• pp.182-186
• /
• 1997

Diamond-like carbon(DLC) films were deposited on silicon substreates by using an RF plasmaassisted CVD apparatus; the effects of deposition conditions such as CH4 gas pressure and substrate bias voltage on DLC film friction and wear were examined in both friction and scratch tests. In friction tests critical loads at which the friction coefficient increases abruptly depend on substrate bias voltages: critical loads deposited at a bias voltage of -100 V exceed those deposited at other bias voltages. Critical loads are correlated with DLC film hydrogen content. Critical DLC film loads in scratch tests depended considerably less than in friction tests. The friction coefficient of DLC films depends on neither substrate bias voltage nor CH4 gas pressure.

• Journal of Sensor Science and Technology
• /
• v.28 no.2
• /
• pp.101-105
• /
• 2019

ZnS substrates with excellent transmittance in the mid-infrared region ($3-5{\mu}m$) were prepared using hot pressing instead of conventional chemical vapor deposition (CVD). Diamond-like carbon(DLC) was coated on either one or both sides of the ZnS substrates to improve their mechanical properties and transmittance. More specifically DLC was coated using CVD with an Ar and $C_2H_2$ mixed gas, and Ge was used as the bonding layer. During CVD, the bias voltage was fixed to 500 V and analyzed by Fourier transform infrared spectroscopy (FT-IR), nanoindenter, scanning electron microscope and energy dispersive spectrometry. Results of hardness analysis using the nanoindenter, showed that DLC coating increased from 5.9 to 17.7 GPa after deposition. The FT-IR spectroscopy results showed that, in the mid-infrared region ($3-5{\mu}m$), the average transmittance of the samples with DLC coating on one and both sides increased by approximately 6% and approximately 11.2% respectively. In conclusion, the DLC coating improved the durability and transmittance of the ZnS substrates.