• 동의신경정신과학회지
• /
• 제23권4호
• /
• pp.1-10
• /
• 2012

Objectives : This study aims to evaluate the current status of clinical use of diagnostic equipment in oriental neuropsychiatry. Methods : Thirty clinical studies using diagnostic equipment out of 223 papers in the journal of oriental neuropsychiatry in the 10 years from 2003 to 2012 were reviewed. Results : Ten diagnostic apparatuses were used in 30 papers. HRV (Heart Rate Variability) was used the most, but the results of papers were not consistent. ADS (ADHD Diagnostic System) and ERP (Event Related Potential) were effective in clinical research. Conclusions : Diagnostic equipment might be useful and effective to treat mental disorders if they are to be used properly and followed by well-designed studies.

• 한국방사선학회논문지
• /
• 제15권2호
• /
• pp.159-164
• /
• 2021

진단용방사선발생장치를 이용한 검사는 영상의학과에서 인체 내 정보를 파악하기 위한 가장 유용한 진단장비 중 하나로 신뢰도가 매우 높다. 이와 같은 이유로, 최근에는 영상의학과 영역의 진단 검사 장비를 이용한 검사 건수가 매년 증가하고 있다. 또한, 검사 건수 증가는 장치의 빠른 노화를 불러일으키고 이로 인해 장치에 대한 정도관리(quality control, QC)의 중요성이 대두된다. 특히, 진단용방사선발생장치를 이용한 검사에서 정도관리란 검사시작부터 검사가 끝날 때 까지 발생할 수 있는 모든 문제점을 사전에 알아내고 대처하여 신뢰가 확보된 영상을 획득하여 제공하는 과정에 있는 일련의 모든 활동을 의미한다. 이에 본 연구에서는 진단용방사선발생장치를 이용한 검사에서 정도관리에 대해보고 한다.

• Journal of Information Processing Systems
• /
• 제18권6호
• /
• pp.822-829
• /
• 2022

According to existing study into the remote fault diagnosis procedure, the current diagnostic approach has an imperfect decision model, which only supports communication in a close distance. An Internet of Things (IoT)-based remote fault diagnostic approach for wind power equipment is created to address this issue and expand the communication distance of fault diagnosis. Specifically, a decision model for active power coordination is built with the mechanical energy storage of power generation equipment with a remote diagnosis mode set by decision tree algorithms. These models help calculate the failure frequency of bearings in power generation equipment, summarize the characteristics of failure types and detect the operation status of wind power equipment through IoT. In addition, they can also generate the point inspection data and evaluate the equipment status. The findings demonstrate that the average communication distances of the designed remote diagnosis method and the other two remote diagnosis methods are 587.46 m, 435.61 m, and 454.32 m, respectively, indicating its application value.

• 대한디지털의료영상학회논문지
• /
• 제11권2호
• /
• pp.69-77
• /
• 2009

This study gives an account of the collateral standards in IEC 60601-1-3: 2008 specifying the general requirements for basic safety and essential performance of diagnostic X-ray equipment regarding radiation protection as it pertains to the production of X-rays. The collateral standards establish general requirements for safety regarding ionization radiation in diagnostic radiation systems and describe a verifiable evaluation method of suitable requirements regarding control over the lowest possible dose equivalent for patients, radiologic technologists, and others. The particular standards for each equipment can be determined by the general requirements in the collateral standard and the particular standard is followed in the risk management file. The guidelines for radiation safety of diagnostic radiation systems is written up in ISO 13485, ISO 14971, IEC 60601-1-3(2002)1st edition, medical electric equipment part 1-3, and the general requirements for safety-collateral standards: programmable electrical medical systems. Therefore the diagnostic radiation system protects citizens' health rights with the establishment and revisions of laws and standards for diagnostic radiation systems as a background for the general requirements of radiation safe guards applies, as an international trend, standards regarding the medical radiation safety management. The diagnostic radiation system will also assure competitive power through a conforming evaluation unifying the differing standards, technical specifications, and recognized processes.

• 한국재난정보학회 논문집
• /
• 제16권1호
• /
• pp.163-177
• /
• 2020

연구목적: 최근 시설물 유지관리의 중요성이 높아짐에 따라 시설물 유지관리 분야에 첨단기술의 도입과 활용이 증가하고 있다. 첨단기술이 현장에서 실효적 효과를 발휘하기 위해서는 진단장비의 검인증제도를 통한 신뢰성 확보가 필요하나 제도도입에 대한 사회적인 요구와는 별개로 업계의 시각 및 현실적인 기술수준에는 차이가 존재하고 있다. 본 논문에서는 현황에 대한 종합 및 실무자에 대한 의견조사를 통해 합리적인 시설물 진단장비 검인증 제도의 도입 방향을 연구하였다. 연구방법: 시설물 점검 및 진단장비의 첨단기술 도입 및 활용 촉진을 위한 검인증제도 도입 필요성 및 시급성에 대하여 유지관리 및 건설 분야 실무자들을 대상으로 설문조사를 실시하였다. 또한 일본 및 국내 장비 관련 유사인증제도의 비교분석을 통해 첨단 시설물 진단장비에 대한 검인증제도 도입 방향을 검토하였다. 연구결과: 첨단기술 적용에 대하여 실무자 의견은 높은 비율로 유지관리 분야에 드론 및 로봇 등 첨단기술의 도입이 필요하며, 첨단기술 도입 시 현장에서 상당한 효과를 발휘할 것으로 조사되었다. 반면 현재 국내의 기술 수준은 상대적으로 낮아 기술적용에는 일정한 시간이 소요될 것으로 조사되었다. 또한 시설물 진단장비 검인증제도의 도입을 통해 신뢰성 높은 시설물 진단장비 보급될 것으로 조사되었다. 한편, 국내외 진단 및 계측 장비 등에 대한 유사제도 조사결과, 직접적으로 시설물 유지관리에 첨단기술을 적용한 장비를 검인증 하는 제도는 없으며, 다만, 일본에 진단장비의 성능평가 체계가 도입되어 있다. 국내의 융복합기술이 적용된 제품 인증제도 및 운용중인 186개 인증제도 가운데 유사한 21개 계측 및 진단장비 인증제도를 분석하여, 첨단시설물진단장비에 대한 검인증제도 도입방안을 제시하였다. 결론: 실무자들의 의견을 종합하면 시설물 유지관리 분야의 합리화를 위하여 진단장비에 대한 4차 산업혁명 기술의 적용과 신뢰성 높은 진단장비 활용을 지원하는 검인증제도의 도입은 충분한 타당성을 갖는 것으로 볼 수 있다. 그러나 현실적인 과제는 우리나라의 첨단기술 수준이 시급성에 비하여 낮게 평가되고 있어 첨단 시설물 점검 및 진단장비 검인증 제도는 기술적용 및 검증 수준을 고려한 단계적 확대 형태로 시행되어야 한다. 또한 검인증제도 도입과는 별개로 시설물 진단장비 첨단화 촉진을 위한 별도의 투자 및 지원과 노력이 필요 하다.

• 한국병원경영학회지
• /
• 제5권2호
• /
• pp.22-39
• /
• 2000

The purpose of this study was to determine the difference between estimated profit and utilization of medical equipment upon purchasing and actual results at one teaching hospital in Seoul, Korea Medical equipments over $100,000 from 1992 to 1997 were selected and results were as follows: 1. Twenty equipments out of thirty exceeded estimated profits and the difference was 3.98 billion won and ten equipments did not reach the estimated profits and 5.5 billion won was the difference. Diagnostic equipment exceeded the estimated profit which surgical equipment didn't. 2. Eleven equipments exceeded estimated utilization, which showed 100%. In the mean time, eighteen equipments didn't reach the estimated utilization, which was 71%. Diagnostic equipment showed the less estimated utilization than surgical equipment 3. Twenty-one equipments showed the 6.83 billion won profits and nine equipments showed the 1.6 billion won deficits. Diagnostic equipment was more profitable than surgical equipment. Finally. diagnostic equipment helped improving hospital management than surgical equipment. 4. Main factors which showed the big difference from the initial plan were lacking reasonable estimated method, no evaluation system for purchase, emphasis in medical treatment, excessive expenditure in maintenance, duplicated investment for medical equipment and leadership commitment. As a result. Substantial planning is required from the requesting department in consideration of estimated profit and utilization and systematic quality control is needed to confirm. Also, One-sided decision making should be avoided to purchase a high cost medical equipment and efforts should be made in examining carefully and developing a reasonable analytic method.

• 대한방사선기술학회지:방사선기술과학
• /
• 제16권1호
• /
• pp.101-106
• /
• 1993

In order to assure safety of both patient and operator, and to provide uniform quality radiographs, it is necessary to perform periodic calibration of diagnostic X-ray equipment. A basic parameter of diagnostic equipment's and its image sharpness is the size(and shape the energy distribution) of the focal spot as viewed along the central X-ray beam. This size determines the resolution possible with the equipment and also determines the heat characteristics of an anode. A fine focus tube gives high resolution but causes high local heating of target. In past, the pin-hole and star pattern image measurement for evaluation of resolution have been widely used, but it produced blurring and inaccuracy of image. So newly inverted Ug-meter has advantage in more convenient measurement method and less out-put bias than other image measurement. The authors intended to compare measured focal size between Ug-meter and focal spot test tool, changed state from setting to now of units.

• 지능정보연구
• /
• 제4권1호
• /
• pp.115-131
• /
• 1998

Customer service process is one of the most important processes in today's competitive business environment. Among the various activities of customer service process, equipment malfunction diagnosis activity should be performed fast and accurately. When a customer calls the service center and reports the observed symptoms, he/she describes them in layman's terms. Therefore, the customer-reported symptoms have not been considered helpful information for service representatives. However, in order to perform diagnosis activity fast and accurately, we need to make use of the customer-reported symptoms actively. In this research, we developed three systems called R-EMD (Rule-based Equipment Malfunction Diagnostic system), C-EMD (Case-based Equipment Malfunction Diagnostic system) and R&C-EMD (Rule & Case-based Equipment Malfunction Diagnostic system), each of which diagnoses equipment malfunctions using the customer-reported symptoms. R&C-EMD is a hybrid system that utilizes both rule-based and case-based technologies. The diagnosis rules used in R&C-EMD and R-EMD were not acquired from service manuals or interviews with service representatives. Rater, we extracted them directly from the past diagnosis cases based on symptoms' frequencies. By this way, we were able to overcome the knowledge acquisition bottleneck. Using the real 100 malfunction diagnosis cases, we evaluated the performances of R&C-EMC, R-EMD and C-EMD in terms of speed and accuracy. In diagnosis time, R&C-EMD took longer than R-EMD and shorter than C-EMD. However, R&C-EMC was the best in accuracy.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제12권1호
• /
• pp.61-69
• /
• 2006

The Diagnostic Imagining Department essentially needs to be transformed by the plan of the room and the medical equipment which should be improved according to a rapid development in technology. And the room should be considered the scale and composition an the time of planning. Because this part is often influenced in a specific character of imaging equipment in the room. The researches on the scale and composition of Diagnostic Imaging Department were the main part in 1980's but after 1990's this kind of researches have not been enough. So this study has an intention of proposing basic data which is used in planning the Diagnostic Imaging Department by analyzing the actual condition of the area organization in general hospital.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.493-504
• /
• 2018

The diagnostic radiation equipment is managed in accordance with the "Rules for Safety Management of Diagnostic Radiation Equipment" enacted in 1995. The equipments should be inspected before use and every three years after use in accordance with the [Appendix 1] of the same rule. The inspection standard has been maintained without particular revision since enacted. But, over the past two decades new types of equipments have been manufactured and used. So, it is necessary to revise [Appendix 1] by making inspection items and inspection standards. In this study, we revised the classification system of equipments and reviewed international standards of IEC 60601 series, IEC 61223 series and AAPM TG 18 On-line Report No.03. And identified the problem of current inspection standards. Through this, we revised, deleted and added the inspection items and inspection standard of each equipment to meet the domestic circumstances. As a result of the study, we reorganized the classification system of equipment which are current classified as 5 classes into 22 classes as X-ray system etc. (7 classes), CT system etc. (5 classes) and Dental X-ray system etc. (10 classes). And then, we developed 70 inspection items for 6 types of equipments according to the reorganized classification system of equipments. The inspection items and inspection standards derived from this study have been proposed to the KCDC and will be applied to the revision of the Rule's [Appendix 1]. Therefore, we expect to be used as reference materials for domestic medical center, inspection institutions, and equipment manufacturing import companies.