• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.132-134
• /
• 2009

Hemorrhagic shock is a common cause of death in emergency rooms. Since the symptoms of hemorrhagic shock occur after shock has considerably progressed, it is difficult to diagnose shock early. The purpose of this study was to improve early diagnosis of hemorrhagic shock using a survival prediction model in rats. We measured ECG, blood pressure, respiration and temperature in 45 Sprague-Dawley rats, and then obtained a logistic regression equation predicting survival rates. Area under the ROC curves was 0.99. The Hosmer-Lemeshow goodness-of-fit chi-square was 0.86(degree of freedom=8, p=0.999). Applying the determined optimal boundary value of 0.25, the accuracy of survival prediction was 94.7%

• 대한족부족관절학회지
• /
• 제21권4호
• /
• pp.170-173
• /
• 2017

Soft tissue tumors of the foot have a low incidence rate, and most of them are symptom free, thus it is difficult to diagnose accurately. Herein, we report a 15-year-old male patient who had swelling without pain on the lateral margin of both feet. We performed excisional biopsy of the abductor digiti minimi via subtotal resection, following radiograph and magnetic resonance imaging. According to the histological analysis, hypertrophy of abductor digiti minimi was positive, and other soft tissue tumors were negative. Six months after the operation, normal appearance of both feet was maintained and the patient was satisfied with the result.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권1호
• /
• pp.33-37
• /
• 2002

Insulation aging diagnosis system provides early warning regarding electrical equipment defects. Early warning is very important in that it can avoid great losses resulting from unexpected shutdown of the production line. Since relations of insulation aging and partial discharge dynamics are non-linear. it is very difficult to provide early warning in an electrical equipment. In this paper, we propose the design method of insulation aging diagnosis system that use a electromagnetic wave and acoustic signal to diagnose an electrical equipment. Proposed system measures the partial discharge on-line from DAS(Data Acquisition System and acquires 2D patterns from analyzing it. For filtering the noise contained in sensor signals we used ICA algorithms. Using this data, we design of the neuro-fuzzy model that diagnoses an electrical equipment and is investigated in this paper. Validity of the new method is asserted by numerical simulation.

• 한국조리학회지
• /
• 제9권3호
• /
• pp.155-168
• /
• 2003

As people's interest about food service rises, curiosity about correct foodservice company's information is rising on own inclination and necessity than usual foodservice company. Full text search site that do to foodservice company hereupon is operated, it is becoming menu that do not fall in name of ' Eumsikjeomchatgi ' in a representative search site such as Yahoo, Empas, Hanmir and so on. But, is not beam margin battle array that these search engines find data that they want being applied perfectly in site FACE that is use up to now. Also, is looked that there is problem about practical use service and search. Because search effect of site by that investigate consumers' awareness and practical use turkey for foodservice company search site and diagnose present level, it is thing to grope improvement. This research may supply one suggestion point establishing by more effective marketing communication strategy through internet hereafter.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권1호
• /
• pp.62-68
• /
• 1999

FCM(Fuzzy Cognitive Map) is proposed for representing causal reasoning. Its structure allows systematic causal reasoning through a forward inference. Authors have already proposed a diagnostic system based on FCM to utilized to identify the true origin of fault by on-line pattern diagnosis. In FCM based fault diagnosis, Temporal Associative Memories (TAM) recall of FCM is utilized to identify the true origin of fault by on-line pattern match where predicted pattern sequences obtained from TAM recall of fault FCM models are compared with actually observed ones. In engineering processes, the propagation delays are induced by the dynamics of processes and may vary with variables involved. However, disregarding such propagation delays in FCM-based fault diagnosis may lead to erroneous diagnostic results. To solve the problem, a concept of FTCM(Fuzzy Time Cognitive Map) is introduced into FCM-based fault diagnosis in this work. Expecially, translation method of FTCM makes it possible to diagnose the fault for some discrete time. Simulation studies through two-tank system is carried out to verify the effectiveness of the proposed diagnostic scheme.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권5호
• /
• pp.270-272
• /
• 2015

Benign fibrous histiocytoma (FH) is a benign tumor composed of fibroblasts and histiocytes in varying proportions. This tumor is usually found in adult extremities but rarely occurs in deep soft tissues of the oral cavity. As it is difficult to diagnose with physical and radiologic exams, deep benign FH can only be diagnosed by histopathology. We report a case of a 36-year-old female patient who came to our department with painless swelling in the right buccal mucosa. This case report reviews the clinical, radiological, and histological aspects of this tumor.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권4호
• /
• pp.297-306
• /
• 2007

Distraction osteogenesis was pioneered by Ilizarov in the treatment of injured extremities. Its subsequent application to Oral and Maxillofacial Surgery has opened a new chapter in the treatment of facial deformity. Careful monitoring of the period of distraction and consolidation of the callus is important and has been well described. Complications, such as infection, haematoma and premature ossification, are difficult to diagnose and can compromise the outcome after the surgery. Too slow rate of distraction results in premature fusion of cortices and too rapid information of bone 'cyst' within the callus distraction. I experienced 2 patients of congenital unilateral mandibular hypoplasia, so called Hemifacial Microsomia. After distraction surgery, I evaluated callus formation of mandibular distraction with Ultrasound Sonography during distraction and consolidation period. Plain radiography, although it enables accurate measurement of the distraction gap, did not give sufficient detail to allow assessment of early stages of bone formation, But, ultrasound monitoring could enable continuous monitoring of the distraction gap without exposure to ionizing radiation and allow detection of fine detail, which may influence manipulation of the callus.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1092-1100
• /
• 2004

This paper describes the application of fault tree technique to analyze of compressor failure. Fault tree analysis technique involves the decomposition of a system into the specific form of fault tree where certain basic events lead to a specified top event which signifies the total failure of the system. In this research. fault trees for failure analysis of screw type air compressor are made. This fault trees are used to obtain minimal cut sets from system failure and system failure rate for the top event occurrence can be calculated. It is Possible to estimate air compressor reliability by using constructed fault trees through compressor failure example. It is Proved that FTA is efficient to investigate the compressor failure modes and diagnose system.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1411-1418
• /
• 1996

Large scale plants are equipped with a number of the rotating machineries which ocuupy important positions in the plant system. Therefore, the most important one is a vibraiton diagnostic thchnology which can detect quickly any abnormal symptom of operating malfunction and guve operational and inspection guides adequately. A new diagnosis method is developed in this paper, in which the fuzzy set theory is introduced to diagnose the defects of ratating machinery. The selection of memgership function and the fuzzy operation model are discussed in datail here. The systme is sucessfully used for various defacts diagnosis of rotating machinery. The result indicate that realixtic application can be builtusing this approach.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.95-100
• /
• 2001

Recently, coated milling cutters are widely used for improving the productivity of cutting processes through high speed cutting and longer tool life. In metal cutting, cutting force increase rate is important factor to diagnose the cutting conditions because the amount of tool wear directly influences the cutting forces. As the cutting length increases, the worn cutter increases the cutting forces. In this study, the effect of coating process of end milling cutter on the cutting performance, especially on the cutting force increase rate, is investigated. The results acquired through the cutting test measuring cutting force increase rate show that not only the injection quantity of $N_2$ and Ar but also mean temperature influence the cutting force increase rate during the end milling process.