• 공학논문집
• /
• 제3권1호
• /
• pp.199-205
• /
• 1998

유리병을 대량생산하는 자동 병유리 제병공장에서의 배합공정상 가장 큰 문제점은 원료의 대부분을 차지하는 Cullet Quality Control 이다. 판유리조성은 병유리조성과 차이가 크지만, 판유리 파유리의 조성은 거의 일정하고 순수 판유리 파유리만을 얻을 수 있으므로 Cullet Quality Control이 용이하다. 또한 원료가 저가이므로 원가절감을 달성 할 수는 있으나, 판유리 파유리의 사용량을 용출량 대비 25%이상 증가시키면 조성과 점도의 차이로 인하여 로내 유리물의 유동성이 떨어져 용해로 Bottom 온도가 저하되고 유리의 균질성이 나빠진다. 따라서 용해로의 Dead Corner부분의 Devitrification 발생이 증가하게 되고 유리병의 생산효율을 저하시키는 원인이 된다. 이 문제점을 해결하기 위한 실험을 다음의 3가지 방법으로 실시하여 보았다. 즉 연구를 위하여 용융온도를 높이는 방법과 Booster를 사용하는 방법, Bubbler를 사용하는 방법으로 하였다. 그 결과 Booster 사용시 판유리 파유리 혼입율 90%, Bubbler 사용시 혼입율 70%, 용융온도를 $1480^{\circ}C$에서 $1560^{\circ}C$ 증가시 혼입율 60%로 혼입율을 감소시킬 수 있는 결과를 얻었다. 여기서 용융온도를 증가시키는 방법은 용해로 수명단축과 연료비 상승에 문제점이 있으므로 현실적으로 적용이 불가능한 방법이며, Booster 사용방법은 용해로 Bottom 부위의 용융 유리에 열을 가하여 열대류에 의해 유동성을 증진시키므로 유리의 균질화에는 양호 하나 전기에너지 소비가 많은 단점이 있다. Bubbler 사용방법은 압축공기에 의한 물리적인 대류 증진방법으로 균질화 면에서는 Booster보다는 못하나 가장 경제적인 장점이 있는 방법임을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1099-1102
• /
• 2004

For the development of Pb-free low temperature sintering glass frits, $BaO-B_2O_3-SiO_2$ system was examined. The content of BaO and $B_2O_3$ was changed when the content of $SiO_2$ was fixed to 10 mol%. When the content of BaO was more than 60 mol% devitrification was observed. In the sintering temperature range between 520${\sim}$620 $^{\circ}C$, the optimum sintering temperature decreased as the content of BaO increased. When BaO ${\geq}$45 mol%, the glasses were crystallized after sintering. Candidate compositions are suggested in $BaO-B_2O_3-SiO_2$ system, which can replace the PbO containing glass system.

• 한국세라믹학회지
• /
• 제19권3호
• /
• pp.236-240
• /
• 1982

The crystallization of melts with similar composition of Portland cement liquid containing 0-5% $K_2O$ was studied by differential thermal and isothermal reaction. The devitrification of melts was occured in stages, the recognizable amount of CaO was appered at the first step, then proto-C3A was crystallized. The latter showed to occur in both cubic C3A and Ca-ferrite crystallization. Batches lost remarkable amounts of $K_2O$ as a result of volatilization during melting and the solubility of $K_2O$ in the melts was unstable.

• Journal of Magnetics
• /
• 제9권2호
• /
• pp.65-68
• /
• 2004

Magnetically soft nanomaterials obtained by controlled crystallisation of metallic glasses are the newest group of materials for inductive components. In particular, research is carried out in the field of alloys for high temperature applications. This kind of materials must meet two basic requirements: good magnetic properties and stability of properties and structure. In the present work the magnetic properties and structure of Fe-Co-Hf-Zr-Cu-B (HIDTPERM-type) alloys were investigated, as well as their stability. Differential thermal analysis, (DTA), X-ray diffractometry (XRD), transmission electron microscopy (TEM), magnetometry (VSM) and quasistatic hysteresis loop recording were used to characterise structure and properties of the alloys investigated. Optimisation against properties and their stability was performed, resulting in formulation of chemical composition of the optimum alloy, as well as its heat treatment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.21-23
• /
• 1994

By adding La₂O₃ to optical multicomponent glass composition, after making mother glass and core fiber that enable to enlarge the infrared transmittance region, then surveyed the optical properties. Through thermal analysis of the glass abstained by melt-quenching after selecting stable basic composition on devitrification and replace SiO₂ by 4-12wt% La₂O₃. As La₂O₃ increases up to l2wt% transition temperature, refractive index, density, deformation temperature increased, whereas thermal expansion coefficient decreased. As a result of inspectig transmittance in UV/VIS/IR region, visable region indicated the decrease of transmittance by increasing the La₂O₃ and transmittance region was enlarged by increasing the La₂O₃ in IR region. Also, fabricate core fiber at 820℃ and severy the optical loss we could fact that La₂O₃ composition added 12wt% showed the minimum optical loss.

• Journal of Magnetics
• /
• 제8권3호
• /
• pp.113-117
• /
• 2003

$Co_{78-x}Pt_xB_{10}Si_{12}$ alloys were produced using the melt-spin process in order to study the crystallization behavior and ensuing magnetic properties of the $Co_{78-x}Pt_xB_{10}Si_{12}$ (Co-Pt) amorphous alloys as a function of the Pt content. We showed that when $\chi$ $>$ 15 well below its stoichiometric composition, CoPt crystallized in the amorphous alloy, thus greatly altering the crystallized microstructure and magnetic properties during annealing. Below this composition, the main crystallization product was Co with Pt dissolved in its lattice. In spite of the nucleation of CoPt with high magnetic anisotropy, the highest coercivity was obtained when x was 15. It was also concluded that the Pt addition deteriorated the glass stability, triggering the devitrification at a progressively lower temperature.

• 암석학회지
• /
• 제22권3호
• /
• pp.219-233
• /
• 2013

부산광역시 동부의 장산화산암체는 화산함몰체로 알려져 있고, 화산함몰체 외각부를 따라 구과상 유문암이 $60^{\circ}{\sim}90^{\circ}$의 각도로 수직유상구조를 보여주며 환상암맥으로 나타난다. 구과의 직경은 수 mm에서 2.8 cm 이상이며, 평균적으로 5~10 mm로 측정되었다. 이들 구과는 하나의 핵을 중심으로 방사상을 나타내는 단식 구과형과 육안상 흰색을 띠는 각을 가지면서 핵 부분을 중심으로 방사상을 나타내는 방사상 단식 구과형으로 비교적 단순한 형태를 보여주며, 이들 구과들이 서로 인접하여 합체된 포도송이와 같은 집합체를 보여주기도 한다. 구과의 동심원상 핵 부분에 대한 전자현미분석 결과, 은미정질 기질부 물질의 성분은 주로 $SiO_2$가 거의 82% 이상, $Al_2O_3$는 7~10%, $Na_2O+K_2O$는 8% 이하의 실리카 물질과 장석(새니딘)의 미세한 섬유상 교생으로 나타났다. 구과에 대한 X-선 회절분석 결과, 석영, 새니딘, 앨바이트 그리고 소규모의 운모, 카오린, 녹니석으로 구성되며, X-선 면분석 결과, 핵 부분은 $SiO_2$가 풍부하며, 각 부분은 $Na_2O$ 또는 $K_2O$, $Al_2O_3$가 풍부하였다. 장산콜드론의 유문암 암맥에서 나타나는 구과의 깃털형과 비등형 결정 형태는 마그마 관입에 의한 이동속도보다 유리질 물질로부터 탈유리화작용이 더 빠른 속도로 진행되었고, 비교적 정체된 상태에서 급속한 냉각으로 형성되었음을 지시한다. 구과들은 고규산(75.4~75.7 wt.%) 유문암질 마그마로부터 유래되었다.

• 세라미스트
• /
• 제10권3호
• /
• pp.67-74
• /
• 2007

Crystallisation kinetics of the erbium doped soda-tellurite glasses were studied using the differential thermal analysis (DTA) and differential scanning calorimetery (DSC) techniques. The DTA curves in the temperature range of 350 K to 650 K were obtained from isochronal heating rates, chosen in the range of 2 to 20 K/min. DSC isothermal curves were used to calculate the fraction of crystals formed on reheating. The apparent activation energies for devitrification were derived by measuring the shifts in the values of $T_g$ and $T_x$ with heating rates, using the Kissinger method. The derived values of apparent activation energies for isochronal and isothermal methods varied in the range of $190-204\;{\pm}\;5\;kJ\;mol^{-1}$. The X-ray powder diffraction analysis of heat treated and transparent samples showed the presence of nano-scale size sodium-tellurite crystals. These crystallites were found to have a strong influence on the full width of half maxima of the transition in $Er^{3+}:\;^4I_{13/2}{\rightarrow}^4I_{15/2}$, which extended from 70 nm in the vitreous materials to 132 nm in glass-ceramic materials.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.281-286
• /
• 1982

The composition of glasses to be suitable for crystallisation of $BaTiO_3$ by heat-treatment and the dielectric properties of the glass-ceramics were investigated. The composition of the family of glasses was defined by the formula $\chi$ $BaTiO_3 + (100-$\chi$)Al_2O_3$.$2SiO_2$ and excess BaO. Data were presented on dielectric constant and loss tangent at various frequencies. The effects of excess BaO on dielectric properties were investigated. The additions of $Na_2O$ and $Nb_2O_5$ shifted the Curite temperature of these glass-ceramics. The glass composition which was able to be melted at 145$0^{\circ}C$ and moulded as homogeneous glass phase without devitrification should contain $Al_2O_3$.$2SiO_2$ more than 30 mole %. The more the amount of additive BaO increased, the more dielectric constant increased. When the maximum heat-treatment temperature was 105$0^{\circ}C$, we obtained higher dielectric constant than that of 95$0^{\circ}C$. The dielectric constant and the dielectric loss were stable at frequencies between 5$\times$104 and 107 cycle per second. When $Na_2O$ and $Nb_2O_5$ were added, the Curie temperature, presented at 14$0^{\circ}C$ to 15$0^{\circ}C$, shifted to lower temperature. Therefore, the glass-ceramics having high dielectric constant at room temperature were obtained.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.385-393
• /
• 1995

Akali-resistant porous glass was prepared by phase separation in Na2O-B2O3-SiO2 system containing ZrO2 and MgO. ZrO2 was added for alkali-resistance and MgO for anti-cracking during leaching. Optimal content of ZrO2 for alkali-resistance was 7wt% and devitrification by heat treatment resulted from further addition. Pore size and pore volume were decreased and specific surface area was increased with ZrO2 addition due to depression in phase separation. Addition of 3mol% MgO to mother glass containing 7wt% ZrO2 was effective for anti-crack during leaching. In this case, with phase separation at 55$0^{\circ}C$ and 5$25^{\circ}C$ for 20 hrs. crack-free porous glasses could be prepared. The relation between pore size r and heat treatment time t at 55$0^{\circ}C$ was D=25.58＋18.16t. According to measurement of gas permeability, the mechanism of gas permeation was Knudsen flow. N2 and He permeability of porous glass which was prepared by heat treatment at 55$0^{\circ}C$ for 20 hrs. were 0.843$\times$10-7mol/$m^2$.s.Pa and 2.161$\times$10-7mol/$m^2$.s.Pa respectively.