• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1677-1688
• /
• 2020

In the sodium-cooled fast reactor, the steam generator is a heat exchange device between sodium and water, which may cause leakage, resulting in a sodium-water reaction accident, which in turn affects the safe operation of the entire nuclear reactor. To this end, the electromagnetic vortex flowmeter is used to detect leakage of the steam generator and its signal processing method is studied in this paper. The hydraulic experiment was carried out by using water instead of liquid sodium, and the sensor output signal of the electromagnetic vortex flowmeter under different gas injection volumes was collected. The bubble noise signal is reflected by the base line of the sensor output signal. According to the relationship between the proportion of the bubble noise signal in the sensor output signal and the gas injection volume, a signal processing method based on the energy ratio calculation is proposed to detect whether the water contains bubbles. The gas injection experiment of liquid sodium was conducted to verify the effectiveness of the signal processing method in the detection of bubbles in sodium, and the minimum detectable leak rate of water in the steam generator was detected to be 0.2 g/s.

• 한국통신학회논문지
• /
• 제34권3B호
• /
• pp.264-273
• /
• 2009

본 논문에서는 IEEE 802.15.3 HR-WPAN(High Rate Wireless Personal Area Network)의 PNC(PincoNet Coordinator)에서 DEV(DEVice)의 링크 상태에 따라 동적으로 채널 시간을 할당하는 DABL(Dynamic Allocation of channel times Based on Link quality of the DEV) 알고리즘을 이용하여 시스템에서의 평균 트래픽 전송률을 향상시키고 지연시간을 감소시키는 방법을 제안한다. 좀 더 구체적으로, DABL 알고리즘은 DEV의 링크 상태에 따라 다중 변조 기법을 제공할 뿐만 아니라, 슈퍼프레임에서의 각 DEV를 위한 채널 타임도 동적으로 스케줄링하는 방법을 제공한다. 또한 트래픽의 QoS(Quality of Services)를 고려하여, 본 논문에서는 실시간 트래픽과 비실시간 트래픽으로 구분하여 DABL 알고리즘을 제안하였다. 마지막으로, 본 논문에서는 기존 균등 분할 방식과 DABL 방식의 성능 비교를 위해 시뮬레이션을 수행하였다.

• 방송공학회논문지
• /
• 제15권3호
• /
• pp.346-354
• /
• 2010

지상파 DMB에서는 양방�� 데이터 서비스를 위하여 MPEG-4 BIFS 규격을 사용하고 있다. BIFS는 콘텐츠의 장면을 구성하는 AV, 이미지, 그래픽, 텍스트 등의 다양한 멀티미디어 객체를 장면상에 표현하고, 사용자로부터 입력을 받아 표현된 객체를 조작하도록 하는 것이 가능하다. 그러나 BIFS가 다양한 형태의 입력장치를 갖는 멀티미디어 시스템에 부합되도록 설계되었지만, 오늘날과 같이 제한적 입력장치를 갖는 휴대 단말에 대한 고려가 결여되어 있다. 문제는 DMB 단말들이 제한적 입력을 가질 수밖에 없기 때문에 사용자가 양방향 데이터 콘텐츠를 조작하는 방법이 일관적이지 못하다는 것이다. 본 논문에서는 이러한 문제를 해결하기 위하여 콘텐츠 제공자와 사용자간의 통일되고 효율적인 콘텐츠 조작을 위해 현재의 BIFS 규격에 KeyNavigator 노드를 추가로 정의하였다. KeyNavigator 노드는 BIFS 콘텐츠에서 휴대 단말의 방향키를 이용하여 BIFS 객체간의 이동이나 BIFS 객체를 선택하는 방법을 제공한다. KeyNavigator 노드를 사용함으로써 BIFS 콘텐츠 제공자는 의도하는 바에 따라 콘텐츠를 저작할 수 있고 휴대 단말 사용자에게도 통일되고 효율적인 BIFS 콘텐츠 제어 방법을 제시하는 우수한 효과가 있다.

• 복식
• /
• 제27권
• /
• pp.163-171
• /
• 1996

As the current stage of the fashion begins to follow the styles of the past the study on he past costume is getting more importance and as the methodology of the study the accurately ap-proached study through the rehabilitation of the past costume is more needed than the simple re-arrangement of the historical documents. By this methodology this study can be positioned as a re-creation activity. The results of the study are as follows. 1) Style: The S-line silhouette remains be-cause of the straight silhouette or the blossom style bodice. This dress has various types of sil-houette but generally it forms one silhouette and is one-piece. 2) color and Material: The material varies hile the color is divided as the main color of ivory and the stress color of brown. This shows not only that the material has been varied but also that they tried to reduce the monotony. 3) Pattern and Sewing: The simple external figure and the previous stage typically shows the movement to the simplicity of the contemporary and the num-ber of patterens is plenty and the sewing method is also complex. 4) Detail. To overcome the simplicity of the style and to show the characteristics of the afternoon dress the skunk fur the net the sash, and the bow are used. 5) Structural Characteristics: The front open-ing the back opening and the side opening coexists in one-pieced dress and this forms unique structure and complex fastening device. The ribbon tape and casing not only finish the seam but also fix the shape of the dress. Synthetically the 1913-14 afternoon dress has the characteristics of transitional stage in which the characteristics of the costume of 1910s and the remnants of the characteristics of the pre-vious costume style and shows the character-istics of afternoon dress well in terms of the ma-terial the structure and the detail.

• 한국환경보건학회지
• /
• 제35권6호
• /
• pp.500-509
• /
• 2009

Passive samplers have been used for many years for the sampling of organic vapors in work environment atmospheres. Currently, all passive samplers used in domestic occupational monitoring are foreign products. This study was performed to evaluate variable parameters for the development of passive organic samplers, which include the geometry of the device and diffusive length for the sampler design. Four prototype diffusive lengths; A-1(4.5 mm), A-2(7.0 mm), A-3(9.5 mm), A-4(12.0 mm) were tested for adsorption performances to a chemical mixture (benzene, toluene, trichloroethylene, and n-hexane) according to the US-OSHA's evaluation protocol. A dynamic vapor exposure chamber developed and verified by related research was used for this study. The results of study are as follows. The results in terms of sampling rate and recommended sampling time test indicate that the most suitable model was A-3 (9.5 mm diffusive lengths on both sides) for passive sampler design in time weighted average (TWA) assessment. Sampling rates of this A-3 model were 45.8, 41.5, 41.4, and 40.3 ml/min for benzene, toluene, trichloroethylene, and n-hexane, respectively. The A-3 models were tested on reverse diffusion and conditions of low humidity air (35% RH) and low concentrations (0.2 times of TLV). These conditions had no affect on the diffusion capacity of samplers. In conclusion, the most suitable design parameters of passive sampler are: 1) Geometry and structure - 25 mm diameter and 490 $mm^2$ cross sectional area of diffusion face with cylindrical form of two-sided opposite diffusion direction; 2) Diffusive length - 9.5 mm in both faces; 3) Amount of adsorbent - 300 mg of coconut shell charcoal; 4) Wind screen - using nylon net filters (11 ${\mu}m$ pore size).

• Nuclear Engineering and Technology
• /
• 제44권5호
• /
• pp.551-560
• /
• 2012

The Wolsong-1 (W-1) Phase-B pre-simulations were carried out in preparation for tests to be conducted for the restart of the reactor after a major refurbishment project that included replacement of the pressure tube. These pre-simulations for Wolsong-1 Phase-B differ from those in the past that were performed for the Wolsong-1,2,3,4 tests in that these tests use the WIMS/DRAGON/RFSP-IST code suite for verification of the tests and gadolinium instead of the traditional PPV/MULTICELL/RFSP code system and boron as poison in the moderator system. The use of gadolinium is deemed not to have domestically accumulated experience gained from the previous Phase-B tests. Thus, it is appropriate to conduct a study in order to gain a correct understanding and interpretation of potential differences in test results stemming from using gadolinium rather than boron. Although the calibration of the reactivity device will not be noticeably different using boron and gadolinium at a constant moderator temperature, the temperature dependency of the neutronic behavior due to the presence of gadolinium in the moderator system might be pronounced. The results of the pre-simulations using gadolinium revealed that the moderator temperature reactivity coefficients indeed showed significant differences in comparison with those with boron. In order to secure the validity of the analysis results, the newly acquired WIMS/DRAGON/RFSP-IST code suite was verified against the W-2,3,4 Phase-B test results. The results of the new code suite verifications revealed some overall improvements in accuracy; justification of the use of the code can be claimed for the validation of the W-1 Phase-B test results.

• 한국조경학회지
• /
• 제29권1호
• /
• pp.41-50
• /
• 2001

The seoul Metropolitan Government has announced a program of the realization of a Korean garden named 'Seoul Park' in Paris 'Jardin d'Acclimatation' in June, 2000. The program for 'Seoul Park' in Paris has double objectives which aims celebrating the 10th anniversary of the establishment of sisterhood relationship between Seoul and paris and to promote the mutual cooperation and the amity between the two metropolitan cities. The purpose of this study is focusing on the issues on the setting procedure of characteristics of the 'Seoul Park', type of the Park, and design realization of expression of Korean identity, and the cultural consolidation between parks in Korean and French. The Seoul Park will be constructed on the shore of a lake of the Jardin d'Acclimatation, and the size of the area is 4,675㎡. In July, a design competition for the preparation of a schematic plan of the Seoul Park was held in Seoul. In this competition, the author won with a scheme which proposed a Korean Garden as expression of "between" two cultures which is fitted into the French environment. Although, the Seoul Park in Paris is a small Korean garden, its significance would be emphasized in terms of that it represents the adaptation of a Korean culture to the French territory. Throughout the winning entry, we could recognized hat the author defines Korean garden as 'time device', and 'Seoul Park' as 'Situation' which is the consolidation of the cultures between korea and France. And also the author pursued Korean garden as a net type of 'sequence of the event'. In this paper, we have discussed the concept and the schematic plan of the winning entry. focusing on following issues: Definition of the garden; Form of the garden; Expression of Korean garden; Representation of the reconciliation between two environments. Since many parts of the garden are under designing, and the discussion on the resetting of the existing trees in the garden is in progress, more specific investigation will be done in the next thesis.

• 실천공학교육논문지
• /
• 제6권2호
• /
• pp.105-110
• /
• 2014

본 연구에서는 강한 내구성을 지닌 자동차 타이어용 압력센서를 개발하기 위해 박막 물질로서 적용될 티타늄 멤브레인의 기계적 특성이 연구되었다. 제작공정으로 기존의 마이크로 머시닝공정과 적층 공정기술이 동시에 적용되었으며, 티타늄 멤브레인 기반의 압력 센서가 설계, 제조 및 특성화 되었다. 마이크로 머시닝 공정을 통한 티타늄 멤브레인과 기판의 접합 제조과정은 30분 동안의 20 MPa의 압력과 $200^{\circ}C$의 온도과정 후 $24^{\circ}C$에서의 냉각으로 진행된다. 각각의 압력센서 표면은 니켈 도금된 후방전극이 기판 위에 마이크로 소자로 조립되었다. 제작과정에서 발생한 잔류응력을 예측하기 위해 유한요소 해석이 적용되었다. 또한 티타늄 멤브레인의 외부 압력하에서 변형에 의한 처짐이 계산되었다. 제작된 장치의 민감도는 $10.15ppm\;kPa^{-1}$ 였고 이때의 정전용량 변화량은 0.18 pF, 압력 범위는 0-210 kPa 였다.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.6310-6316
• /
• 2014

인터넷 사용자 및 스마트 디바이스의 증가로 네트워크 보안의 중요성이 점차적으로 커지고 있다. 네트워크 보안의 세부기술들은 방화벽, IPS, DDoS차단시스템, UTM, VPN, 네트워크 접근제어시스템, 무선네트워크보안, 모바일보안, 망분리 등으로 구성된다. 현재 하드웨어 인프라는 이미 IPv6를 위한 기능을 지원하고 있지만 IPv6 기반 서비스의 제공은 미진하여 대부분의 보안제품들은 IPv4에서 동작하고 있다. 그러므로 본 논문에서는 IPv6를 지원하는 보안 기술인 네트워크 접근제어기능을 설계하고 이를 위해 필수적으로 요구되는 IPv6 단말의 탐색, 차단/격리 그리고 128bit IPv6 주소의 효율적인 관리를 위한 도메인자동 할당 기능을 설계 및 구현하였다. 이를 위해 KISA에서 실제 구축한 IPv6 환경에서 보편적 단말들에 적용이 가능하도록 구현하였다. 결과적으로 보편적으로 사용하고 있는 IPv6 장비들에 대해서 유 무선 호스트 검출, 차단, 격리 및 도메인 할당이 정상적으로 동작하는 것을 확인할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제43권6호
• /
• pp.583-592
• /
• 2011

The radiological characteristics for waste classification were assessed for neutron-activated decommissioning wastes from a CANDU reactor. The MCNP/ORIGEN2 code system was used for the source term analysis. The neutron flux and activation cross-section library for each structural component generated by MCNP simulation were used in the radionuclide buildup calculation in ORIGEN2. The specific activities of the relevant radionuclides in the activated metal waste were compared with the specified limits of the specific activities listed in the Korean standard and 10 CFR 61. The time-average full-core model of Wolsong Unit 1 was used as the neutron source for activation of in-core and ex-core structural components. The approximated levels of the neutron flux and cross-section, irradiated fuel composition, and a geometry simplification revealing good reliability in a previous study were used in the source term calculation as well. The results revealed the radioactivity, decay heat, hazard index, mass, and solid volume for the activated decommissioning waste to be $1.04{\times}10^{16}$ Bq, $2.09{\times}10^3$ W, $5.31{\times}10^{14}\;m^3$-water, $4.69{\times}10^5$ kg, and $7.38{\times}10^1\;m^3$, respectively. According to both Korean and US standards, the activated waste of the pressure tubes, calandria tubes, reactivity devices, and reactivity device supporters was greater than Class C, which should be disposed of in a deep geological disposal repository, whereas the side structural components were classified as low- and intermediate-level waste, which can be disposed of in a land disposal repository. Finally, this study confirmed that, regardless of the cooling time of the waste, 15% of the decommissioning waste cannot be disposed of in a land disposal repository. It is expected that the source terms and waste classification evaluated through this study can be widely used to establish a decommissioning/disposal strategy and fuel cycle analysis for CANDU reactors.