• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.411-421
• /
• 1988

This paper offers a method to design CCD four-valued circuits using the tabular method. First, the four-valued logic function is decomposed by hand-calculation or computer program. Nest, the algorithm is derived form the tabular method based on the decomposition process to realize the DDC four-valued circuit. According to this algorithm, the two-variable four valued logic function is decomposed and realized by CCD network with four basic gates. The synthesis method in this paper proves that the number of devices and cost is considerably reduces as compared with the existing methods to realize the same logic functions.

• Journal of Communications and Networks
• /
• v.17 no.2
• /
• pp.110-117
• /
• 2015

In mobile social network, it is a critical challenge to select an optimal set of devices to supply high quality service constantly under dynamic network topology and the limit of device capacity in mobile ad-hoc network (MANET). In this paper, a multi-devices composition and maintenance problem is proposed with ubiquitous service model and network model. In addition, a multi-devices composition and maintenance approach with dynamic planning is proposed to deal with this problem, consisting of service discovery, service composition, service monitor and service recover. At last, the simulation is implemented with OPNET and MATLAB and the result shows this mechanism is better applied to support complex ubiquitous service.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.879-886
• /
• 2003

Agile frequency synthesizers are the common device used for commandable, wide-band frequency hopping in frequency-hopped (FH) communications. In this paper, synthesizer phase transient effect and its compensation methods in an FH/FSK(Frequency Hopped Frequency Shift Keying) system are studied. Models for these analysis are developed and resulting performance degradations are computed. The basic PLL is difficult to implement for fast frequency hopping in narrowband radio communication systems. To solve this problem, digital frequency synthesizer/CPM (Continuous Phase Modulation)modulator is proposed. And it's performance is analyzed theoretically. The analysis show that fast frequency hopping is possible in frequency hopping system that use digital frequency synthesizer/CPM modulator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1099-1105
• /
• 2005

TRL error correction method is widely used for measuring high frequency device mounted on PCB. In order to correct error more precisely, the characteristic impedance of standard transmission line should be known mounted for error correction. The capacitance per the unit length of transmission line is calculated by using standard transmission line which terminate resistor additionally at previous method and the characteristic impedance of standard transmission line is calculated with fitting method according to frequency, but the characteristic impedance extracted by a manufacturing inaccuracy is influenced. In this study, a novel method can reduce the manufacturing inaccuracy using measured s-parameters and can extract more accurate characteristic impedance than the previous method.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.96-97
• /
• 2000

Incoherent broadband optical sources have been applied in various areas such as a light source for optical device characterization, fiber-optic gyroscopes$^{(1)}$ , and spectrum sliced light source in wavelength division multiplexing (WDM) system$^{(2)}$ . To utilize the inherent low loss in silica optical fibers, various types of incoherent light sources are being developed. Among the light sources, the amplified spontaneous emission (ASE) from a rare earth doped fiber has benefits in temperature stability, high output power, low polarization dependence over semiconductor diodes$^{(3)}$ . Recently erbium doped fibers (EDF) have been intensively researched for ASE sources as well as optical amplifiers$^{(4)}$ . The spectrum of ASE from an EDF, however, is limited in the 1520~1560 nm range in conventional configurations. In this letter we described a new broadband ASE source which included both the conventional ASE band of Er$^{3+}$ ion, 1520nm~1560nm and ASE band from Tm$^{3+}$ ions that extends the bandwidth further. For the first time, to the best knowledge of authors, a fiber ASE source based on the energy transfer between Er$^{3+}$ and Tm$^{3+}$ ions in the range of 1460~1550 nm, has been demonstrated using a single 980nm pump laser diode. (omitted)omitted)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.8
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2B
• /
• pp.133-142
• /
• 2007

WPANs are formed in relatively small area and a PNC that serves as a central control device plays an important role in the operation and organization of a piconet. Typical applications of WPANs are security system and health monitoring system. In these type of systems, guaranteeing realtime service is very important, and communications cannot take place when the PNC malfunctions. Thus, in this situation, it is necessary to elect a new PNC as soon as possible. For this reason, we propose distributed PNC election scheme that considers not only QoS support but also network connectivity to avoid possible network partition. Simulation results show proposed mechanism can select PNC with guaranteeing QoS and connectivity for a limited period.

• Journal of KIISE:Databases
• /
• v.33 no.7
• /
• pp.655-667
• /
• 2006

Due to the rapid development in mobile communication technologies, the usage of mobile devices such as cellular phones and PDAs becomes increasingly popular. One of the best ways to maximize the usability of mobile devices is to make them aware of their current locations and the locations of other fixed and mobile objects. In this paper, we propose a cost-effective Bus Information System, ACE-BIS, which utilizes a mobile device to retrieve the bus routes to reach a destination from the current location. To accomplish this task, ACE-BIS maintains a small amount of information on bus stops and bus routes in a mobile device and runs a heuristic routing algorithm based on such information. When a user asks more accurate route information or calls for a 'leave later query', ACE-BIS entrusts the task to a server into which real-time traffic and bus location information is being collected. By separating the roles into a mobile device and a server, ACE-BIS is able to provide bus routes at the lowest cost for wireless communications, without imposing much burden to a server. The results of extensive experiments revealed that ACE-BIS is effective and scalable in most experimental settings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.164-172
• /
• 2014

Recently, as the number of IoT (Internet of Things) devices for personal or home intelligence increases, the need for unified control and cooperative utilization is required. This paper presents a novel idea, proposes methods for virtualizing Internet of Things (IoT) devices and hosting them on the home AP instead of relying on a cloud service or purchasing a new device to do so. For this, the process and profile of the IoT gadgets need to be virtualized into JavaScript-based objects. Then, to execute and control the instances of the virtualized IoT objects on the wireless AP, a novel instance management method and their interfaces are designed. The implementation and performance section demonstrates the proposed system's stability and operability by showing the stress test results while the wireless AP is running for its wireless routing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.28-34
• /
• 2011

In this paper, we proposed the architecture of the Hybrid Quadrature Polar transmitter which has the wideband characteristics available for the SRD(Short Range Device). First, we developed the simulation environment and carried out performance degradation analysis. Second, we considered the slewrate of the VVA(Voltage Variable Attenuator), time delay between magnitude signal and phase signal and the number of bits for DAC(Digital-to-Analog Converter) as the main performance factors. Then we obtained the minimum required values to meet the transmitting performance requirements of 3GPP standards through simulation results. Based on these results, we implemented the Wideband Hybrid Quadrature Polar transmitter platform and varified the performance requirements through practical measurement.