• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.125-131
• /
• 2017

In this paper, an efficient structure of device-to-device (D2D) synchronization preamble is proposed to meet the enhanced time and frequency synchronization requirements for D2D communication. D2D communication can be applied not only for the cellular communications, but also unmaned aerial vehicle communications and vehicle-to vehicle communication. The proposed preamble structure is transmitting signals at every odd subcarriers, and empty the other subcarriers to minimize the effect of inter-carrier interference. According to the simulation results, the proposed preamble structure provides improved time offset estimation performance, without degrading frequency offset estimation performance compared to the current LTE D2D preamble.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.1841-1865
• /
• 2017

This paper proposes a new interference mitigation scheme for device-to-device (D2D) communications underlaying a cellular network. The object of the proposed scheme is to determine the number of data streams, a precoding matrix, and a decoding matrix of D2D networks so as to maximize the system capacity given the number of data streams of a cellular network while satisfying the constraint of the inter-system interference from D2D networks to the cellular network. Unlike existing interference mitigation schemes based on the interference alignment technique, the proposed scheme operates properly regardless of the number of data streams of a cellular network and moreover it does not require changing the precoding and decoding matrices of a cellular network. The simulation results demonstrate that the proposed scheme significantly increases the system capacity by mitigating the intra- and inter-system interference.

• Journal of Information Technology Services
• /
• v.11 no.2
• /
• pp.339-353
• /
• 2012

Mobile communication technology is advancing forward to deliver more connected devices and richer content and applications. The number of subscriptions continues to grow along with an explosive increase in the mobile data traffic demand. Thereby, it creates a significant network capacity shortage concerns for mobile network operators. In order to address this problem, it is essential to increase the network capacity at a low additional cost. The device-to-device (D2D) communication based proximity service is believed to have a promising future mobile communication technology that is capable to create new mobile service opportunities and offload traffic to the eNB. In addition, it is also required to develop new mobile communication services and its business models not only to accommodate the increasing mobile traffic demand but also to foster profitability of mobile business service providers such as the network providers, contents providers and platform providers. In this article, we first analyze current mobile business eco-system in the context of CPNT based value chain. Then, propose service development framework and business model creation methodologies for the device-to-device communication based services in the beyond LTE/LTE-Advanced systems.

• Journal of Korea Multimedia Society
• /
• v.18 no.12
• /
• pp.1468-1474
• /
• 2015

Efficient spectrum sharing is an important issue in Device-to-Device (D2D) communications underlaying cellular networks as it can mitigate the interference to cellular users and improve the performance of the systems. In this paper, we formulate the radio resource allocation in D2D communications as a mixed nonlinear integer programing. We show the formulated problem is NP-hard and thus a polynomial time algorithm to solve is not possible. Since such a problem is very hard to obtain the optimal solution within a short running time, we instead propose a fast heuristic suboptimal algorithm to mitigate the interference caused to cellular users and improve the performance of the systems. Simulation results are provided to evaluate the performance of the proposed algorithm.

• ETRI Journal
• /
• v.24 no.4
• /
• pp.259-269
• /
• 2002

Polymers are emerging as new alternative materials for optical communication devices. We developed two types of polymer-based devices for optical communications. One type is for ultra high-speed signal processing that uses nonlinear optical (NLO) polymers in such devices as electro-optic (EO) Mach-Z${\ddot{e}} $ hnder (MZ) modulators and EO 2${\times}$2 switches. The other is for WDM optical communications that use low-loss optical polymers in such devices as 1${\times}$2, 2${\times}$2, 4-arrayed 2${\times}$2 digital optical switches (DOSs) and 16${\times}$16 arrayed waveguide grating (AWG) routers. For these devices, we synthesized a polyetherimide-disperse red 1 (PEI-DR1) side chain NLO polymer and a low-loss optical polymer known as fluorinated polyaryleneethers (FPAE). This paper presents the details of our development of these polymeric photonic devices considering all aspects from materials to packaging.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.429-438
• /
• 2016

In this paper, we investigate an interference mitigation scheme by antenna selection in device-to-device (D2D) communication underlaying downlink cellular networks. We first present the closed-form expression of the system achievable rate and its asymptotic behaviors at high signal-to-noise ratio (SNR) and the large antenna number scenarios. It is shown that the high SNR approximation increases with more antennas and higher ratio between the transmit SNR at the base station (BS) and the D2D transmitter. In addition, a tight approximation is derived for the rate and we reveal two thresholds for both the distance of the D2D link and the transmit SNR at the BS above which the underlaid D2D communication will degrade the system rate. We then particularize on the small cell setting where all users are closely located. In the small cell scenario, we show that the relationship between the distance of the D2D transmitting link and that of the D2D interfering link to the cellular user determines whether the D2D communication can enhance the system achievable rate. Numerical results are provided to verify these results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.873-875
• /
• 2014

In this paper, we propose the access control system based bluetooth using the MAC address of the smart device. Access control system that propose compares the smart device MAC address entry and exit and MAC address that is registered with the server. Depending on whether the match was compared, access control is performed. Result of the experiment, control of door is possible only by bluetooth pairing of the bluetooth module and smart device. Therefore, it does not require access to another tool.In addition, Action for access approval is omitted. Therefore, the access authorization procedure is simplified compared to existing access control systems, it is possible to improve the convenience.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4662-4677
• /
• 2018

The dynamic opportunistic device-to-device (DO-D2D) network will frequently emerge in the fifth generation (5G) wireless communication due to high-density and fast-moving mobile devices. In order to improve the Quality of Experience (QoE) of users with different computing capacity devices in the DO-D2D network, in this paper, we focus on the study of how to reduce the packets retransmission delay and satisfy heterogeneous devices. To select as many devices as possible to transmit simultaneously without interference, the concurrent transmitters-selecting algorithm is firstly put forward. It jointly considers the number of packets successfully received by each device and the device's connectivity. Then, to satisfy different devices' demands while primarily ensuring the base-layer packets successfully received by all the devices, the layer-cooperation instantly decodable network coding is presented, which is used to select transmission packets combination for each transmitter. Simulation results illustrate that there is an appreciable retransmission delay gain especially in the poor channel quality network compared to the traditional base-station (BS) retransmission algorithm. In addition, our proposed algorithms perform well to satisfy the different demands of users with heterogeneous devices.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4484-4501
• /
• 2019

In this paper, we put forward a delay-aware secure maximum distance separable (MDS) coded caching scheme to resist the eavesdropping attacks for device-to-device (D2D) content sharing by combining MDS coding with distributed caching. In particular, we define the average system delay to show the potential coupling of delay-content awareness, and learn the secure constraints to ensure that randomly distributed eavesdroppers cannot obtain enough encoded packets to recover their desired contents. Accordingly, we model such a caching problem as an optimization problem to minimize the average system delay with secure constraints and simplify it to its convex relaxation. Then we develop a delay-aware secure MDS coded caching algorithm to obtain the optimal caching policy. Extensive numerical results are provided to demonstrate the excellent performance of our proposed algorithm. Compared with the random coded caching scheme, uniform coded caching scheme and popularity based coded caching scheme, our proposed scheme has 3.7%, 3.3% and 0.7% performance gains, respectively.

• International Journal of Computer Science & Network Security
• /
• v.21 no.1
• /
• pp.152-161
• /
• 2021

The paper focuses on Device-to-device (D2D) Architectures evaluation frameworks. D2D communication and discovery can improve spectrum usage efficiency and optimize the tradeoffs between throughput and energy consumption. The target operation modes involve both indirect communication between two nodes via a base station or the direct communication among proximal nodes, enabling use cases that can support communications out of cellular coverage, as well as low end-end delay requirements. The paper will present the architectural evolution of D2D networks within 3GPP standardization and will highlight key network functionalities and signaling protocols. It will also identify key analytical and simulation models that can be used to assess the performance and energy efficiency of resource allocation strategies, and it will present a suitable cross-layer integrated framework.