• Journal of agricultural medicine and community health
• /
• v.30 no.2
• /
• pp.213-225
• /
• 2005

Objectives: This study was carried out to evaluate the socio-demographic, style of living, and health related behaviors of community residents between urban and rural areas in Jeonbuk province. Methods: The data was obtained from 2,086 residents who lived in Jeonbuk province from July to September 2001 which included 1,238 residents in urban area and 848 residents in rural area. Results: The results were as follows; There were significant differences socio-demographic characteristics including occupation and educational level of the populations between urban and rural areas. In the urban populations, housewives, professional classes, and people who received collage graduate education were significantly higher, people who were engaged in the primary industries and lower educational classes(below middle school), in contrast, were significantly lower than in the rural populations. In the practice of health behavior, consumption of health foods and amount of exercise in urban populations were significantly higher than in the rural, whereas the state of health, prevalence of chronic disease, Body Mass Index(BMI), consumption of ethanol and cigarette, and hours of sleep were not significantly different between the urban and rural populations. In the eating habits, rate of surfeit, vaccination of hepatitis B, and screening of cancer in the urban populations were significantly higher than in the rural, rate of regular meal, taste of salted food, consumption of vegetables, in contrast. were significantly lower than in the rural. But, consumption of coffee, intake of meat, and periodic medical checkup were not significantly different between urban and rural communities. Logistic regression analysis revealed that the factors associated with subjective thought on health state were sex, age, occupation, educational level, exercise, and consumption of coffee. Logistic regression analysis to find related factor with prevalence of chronic disease was conducted. As a results, age, educational level, BMI, intake of meat, screening of cancer, and consumption of health foods were related to prevalence of chronic disease. Conclusions: The study showed that special attention to device the health plan are necessary and it suggested that consideration of regional differences are required to provide the community health projects.

• Science of Emotion and Sensibility
• /
• v.18 no.1
• /
• pp.59-66
• /
• 2015

To date, contents' usability of most multimedia devices has been focused on developer not on user, which made difficult in solving the problems or fulfilling the needs while people using real system. Although user-centered UX and UI researches have been studied and have resulted in innovation in some part, it does not show great effect on usability as it is not easy to interpret human emotions and needs and to apply those to system. Usability is the matter on how deeply smart devices can interpret and analyze human mind not on how much functions and technologies are improved. This study aims to help with usability improvement based on user when people use smart devices in multimedia environment. We studied the interaction between human and contents by analyzing the effect of human emotions and personalities on preference and consumption of contents' type. This study was done by assuming that proper analysis on human emotions may increase user satisfaction on multimedia environment. We analyzed contents preference by gender and emotion. The results showed that there is significant relationship between 'Happy' emotion and 'Comedy Program' preference and men are more prefer it than women. However, it does not reveal any significant relationship between 'Sad' emotion and contents preferences but women are slightly more prefer 'Comedy Program' than men. This result supports the Zillmann's 'mood based management', which suggests that the needs for pleasant contents are revealed to relieve sadness when people are in a sad mood. In addition, our finding corresponds with Oliver's insistence on meeting all four factors, insight, meaningfulness, understanding and reflection, rather than just pleasure for more satisfaction. This study focused on temporary emotional factors and contents and additionally on effect of users' emotion, personality and preference on type of contents consumption. This relationship between emotions and contents study would suggest the better direction for developing smart devices with great contents usability and user satisfaction in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.3
• /
• pp.34-44
• /
• 2020

In order to suggest performance analysis directions of ecological components based on a vegetation-based LID system model, this study seeks to analyze the statistical significance between monitoring results by using SWMM computer simulation and rainfall and run-off simulation devices and provide basic data required for a preliminary system design. Also, the study aims to comprehensively review a vegetation-based LID system's soil, a vegetation model, and analysis plans, which were less addressed in previous studies, and suggest a performance quantification direction that could act as a substitute device-type LID system. After monitoring artificial rainfall for 40 minutes, the test group zone and the control group zone recorded maximum rainfall intensity of 142.91mm/hr. (n=3, sd=0.34) and 142.24mm/hr. (n=3, sd=0.90), respectively. Compared to a hyetograph, low rainfall intensity was re-produced in 10-minute and 50-minute sections, and high rainfall intensity was confirmed in 20-minute, 30-minute, and 40-minute sections. As for rainwater run-off delay effects, run-off intensity in the test group zone was reduced by 79.8% as it recorded 0.46mm/min at the 50-minute point when the run-off intensity was highest in the control group zone. In the case of computer simulation, run-off intensity in the test group zone was reduced by 99.1% as it recorded 0.05mm/min at the 50-minute point when the run-off intensity was highest. The maximum rainfall run-off intensity in the test group zone (Dv=30.35, NSE=0.36) recorded 0.77mm/min and 1.06mm/min in artificial rainfall monitoring and SWMM computer simulation, respectively, at the 70-minute point in both cases. Likewise, the control group zone (Dv=17.27, NSE=0.78) recorded 2.26mm/min and 2.38mm/min, respectively, at the 50-minutes point. Through statistical assessing the significance between the rainfall & run-off simulating systems and the SWMM computer simulations, this study was able to suggest a preliminary design direction for the rainwater run-off reduction performance of the LID system applied with single vegetation. Also, by comprehensively examining the LID system's soil and vegetation models, and analysis methods, this study was able to compile parameter quantification plans for vegetation and soil sectors that can be aligned with a preliminary design. However, physical variables were caused by the use of a single vegetation-based LID system, and follow-up studies are required on algorithms for calibrating the statistical significance between monitoring and computer simulation results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.8 no.2
• /
• pp.109-114
• /
• 2009

Purpose: The purpose of this study is to compare the clinical results of ACL reconstruction between two groups using hamstring tendon autograft and tibialis anterior tendon allograft. Materials and Methods: Between January 2006 and June 2007, we analyzed 68 cases of ACL reconstruction, 32 cases using hamstring tendon autograft and 36 cases using tibialis anterior tendon allograft, with a minimum follow-up of 24 months. For the clinical evaluation, we evaluated the Lysholm score, anterior laxity by Telos device and KT-2000 arthrometer. Results: The mean diameter of graft were 8.0 mm (7.0~9.0 mm) in autograft group and 9.1 mm (8.0~10.0 mm) in allograft group. In all cases, the range of motion was above 135 degrees. The average side to side difference in Telos stress test decreased from $7.3{\pm}1.0$ mm to $2.4{\pm}1.1$ mm in autograft group and from $7.4{\pm}1.2$ mm to $2.3{\pm}1.3$ mm in allograft group. The average Lysholm knee score improved from $72.6{\pm}3.4$ to $92.3{\pm}3.5$ in autograft group and from $72.3{\pm}3.5$ to $91.6{\pm}3.3$ in allograft group. There was no significant difference between two groups in clinical results. Conclusion: Both hamstring tendon autograft and tibialis anterior tendon allograft groups showed satisfactory clinical results, with no significant difference in outcomes between the groups. We suggest that both hamstring tendon autograft and tibialis anterior tendon allograft will be considered as acceptable graft for anterior cruciate ligament reconstruction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.326-333
• /
• 2016

This case study identified the effects of joint mobilization on knee pain, isokinetic strength, muscle tone, and muscle stiffness in an elite volleyball player with a knee injury. The subject had experienced cartilage defects of the left knee joint and underwent surgery to correct the condition. The patient complained of continuous pain in the left knee joint in daily life in addition to pain during exercise. The study was conducted from August 5 to 12, 2015 and joint mobilization was applied to the left knee joint for 15 minutes once a day for 8 days. Knee pain was measured using a visual analogue scale, and the concentric peak torque of the quadriceps and hamstring muscles was measured using an isokinetic muscular strength measurement device. The muscle tone and stiffness of the rectus femoris muscle, vastus medialis, and vastus lateralis on the injured side were measured using a myotonometer. All the measurements were conducted before and after the intervention. Joint mobilization was effective in reducing knee pain on the injured side, increasing the concentric peak torque of the quadriceps and hamstring muscles on both sides, and increasing the muscle stiffness of the quadriceps muscle on the injured side. Concentric peak torque of the quadriceps muscle on the injured side increased a great deal as the number of joint mobilizations was increased, largely diminishing the difference in concentric peak torque between the normal side and injured side. On the other hand, joint mobilization was ineffective in improving the hamstring to quadriceps strength ratio on the injured side. While this study suggests that joint mobilization can be an effective intervention to improve the knee pain, isokinetic strength, and muscle stiffness of elite volleyball players, it should be performed alongside training for an appropriate strength ratio.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study was to evaluate the machining precision and the marginal and internal fit of single restorations fabricated with three types of lithium disilicate ceramic blocks and to evaluate the correlation. Materials and methods: Single restorations were designed using a CAD software program. The crown designed model file was extracted from the CAD software program. Three types of lithium disilicate blocks (Rosetta; HASS, IPS e.max CAD; Ivoclar vivadent, VITA Suprinity; VITA) were milled using a milling machine. For the fabrication of the crown scanned model file, the intaglio surface of the restoration was digitized using a contact scanner. Then, using the three-dimensional inspection software (Geomagic control X; 3D Systems), the process of the overlap of the crown designed model and the scanned model and 3-dimensional analysis was conducted. In addition, the marginal and internal fit of the crowns was evaluated by a silicone replication method. The difference among three types of single ceramic crown was analyzed using a Kruskal-Wallis H test, and Spearman correlation analysis was performed to analyze the correlation between machining precision and fitness (α=.05). Results: There was a significant difference in the machining precision and the marginal and internal fit according to the type of ceramic block (P<.001). In addition, the machining precision and the marginal and internal fit were positively correlated (P<.001). Conclusion: The marginal fit of crowns fabricated according to the types of ceramic blocks was within the clinically acceptable range (< 120 ㎛), so it can be regarded as appropriate machining precision applicable to all clinical as aspects in terms of the marginal fit.

• Journal of Gastric Cancer
• /
• v.5 no.4 s.20
• /
• pp.246-251
• /
• 2005

Purpose: Benign anastomotic stricture after an esophagojejunostomy using EEA stapler following a radical total gastrectomy is one of the most serious complications. The purpose of this study is to evaluate the incidence risk factors, and treatment associated with benign stricture. Materials and Methods: From March 1998 to February 2001, 436 patients underwent an esophagojejunostomy with Roux-en-Y anastomosis using an EEA stapler followed by an endoscopy. Thirty three of the 436 patients(5.5%) developed an anastomotic stricture; included 24 of the 33 patients had a benign stricture. Nine patients with a malignant stricture were excluded. Results: The median age of the 436 patients was 57 years $(23{\sim}85\;years)$. Two hundred ninety two patients were male, and 144 patients were female. The median time to diagnosing the stricture was 1.5 months $(0.5{\sim}6months)$. There was no statistical significance in any of the risk factors, including the diameter of the stapling device, the status of adjuvant treatment, the status of reflux esophagitis, and a clinical history of diabetes and hypertension. The strictured patients were treated with balloon dilatation, one to three times, with symptom relief. Conclusion: There were no statistically significant risk factors. However, further study of the vascularity of anastomoses and benign strictures needs to be considered. In the anastomotic strictured patients endoscopic balloon dilatation appeared to be the first line of treatment.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.245-252
• /
• 2020

The purpose of this study was intended to recognize the importance of quality control (QC) in order to reduce exposure and improve image quality by comparing the center-point (CP) of according to hospital grade and the difference between X-ray field (XF) and light field (LF) in diagnostic digital X-ray devices. XF and LF size, CP were measured in 12 digital X-ray devices at 10 hospitals located in 00 metropolitan cities. Phantom was made in different width respectively, using 0.8 mm wire after attaching to the standardized graph paper on transparent plastic plate and marked as cross wire in the center of the phantom. After placing the phantom on the table of the digital X-ray device, the images were obtained by shooting it vertically each field of survey. All images were acquired under the same conditions of exposure at distance of 100cm between the focus-detector. XF and LF size, CP error were measured using the picture archiving communication system. data were expressed as mean with standard error and then analyzed using SPSS ver. 22.0. The difference in field between the XF and LF size was the smallest in clinic, followed by university hospitals, hospitals and general hospitals. Based on the university hospitals with the least CP error, there was a statistically significant difference in CP error between university hospitals and clinics (p=0.024). Group less than 36-month after QC had fewer statistical errors than 36-month group (0.26 vs. 0.88, p=0.036). The difference between the XF and LF size was the lowest in clinic and CP error was the lowest in university hospital. Moreover, hospitals with short period of time after QC have fewer CP error and it means that introduction of timely QC according to the QC items is essential.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.1
• /
• pp.47-51
• /
• 2016

Purpose By ingestion of 18F-FDG of kidney of PET/CT during the inspection, if additional examination is required, depending on whether you want to water intake, we want to confirm a change in the rate of decrease of F-18 FDG of the kidney. Materials and Methods The 80 patients without kidney disease were performed PET/CT examination. Device was analyzed after setting the kidney to a three-dimensional region of interest. In patients require additional examination, and inspection after 30 minutes, a PET/CT torso examination after the water of the 500 cc ingested at a time. After the addition of both water intake group and no hydration group of kidney of SUV, it was compared with PET/CT torso scan. Results High and low of the kidney SUV did not show a significant difference in the rate of decrease. Reduction rates of background (BKG) of additional examination was 2.8% and reduction rates of SUV was 49.7% (Hydration) : -6.8% (No hydration), so did show a significant difference. In the image blind test, the average point score of hydration and no hydration was 34.25 : 17.25. Conclusion An undercurrent of 18F-FDG in the kidney at the time of torso examination, it was confirmed that the reduction rate after the addition of water intake is high. It is considered that can be expected to improve the quality of an image due to a decrease in elongation through the kidneys examination with additional fluid intake as needed intake.