• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.15-27
• /
• 2019

This paper deals with a web-based public address system for conveying information for different institutions. An architecture for a Short Messaging Service (SMS) based public address (PA) system that can be programmed by an authorized mobile phone or device is proposed. This PA system will facilitate information transfer from heads of offices, managers, directors, and deans of the institutions to its constituents or unit area as well as enable postings of information with proper authentication and validation remotely. The system supports high priority messaging, allowing the conveyance of critical and time sensitive information. The mobility management support for the PA system will be based on the Hierarchical Mobile Internet Protocol version 6 (HMIPv6), hence, allowing for a seamless connectivity to the system. The major advantage of this proposed PA system as compared with the traditional electronic displays and bulletin boards is seamless mobility wherein the display devices can be programmed remotely by heads of the institutions and business organization. It also allows faster communication and immediate actions concerning the different institutions, organizations, and businesses, thus, ensuring high productivity.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.66-73
• /
• 2010

This paper proposes the frequency multiplier using diplexer based on CRLH transmission line with dualband characteristic. The diplexer is separated the output signals of harmonic generator, which is generated the harmonic signals using nonlinear device. The diplexer consists of the inphase power divider, 0o/90o phase controller and dual-band quadrature hybrid coupler. This send out the selecting output signals of the harmonic signals and suppresses out of signals. To validate a function of multiplier, the harmonic generator and diplexer with 2 GHz and 3 GHz operating frequency range is implemented. As a result, the proposed frequency multiplier is operated normally.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.175-183
• /
• 2024

Research into optical signal processing using photonic integrated circuits (PICs) has been actively pursued in various fields, including optical communication, optical sensors, and quantum optics. Among the materials used in PIC fabrication, polymers have attracted significant interest due to their unique characteristics. To fabricate polymer-based PICs, establishing an accurate manufacturing process for the cross-sectional structure of an optical waveguide is crucial. For stable device performance and high yield in mass production, a process with high reproducibility and a wide tolerance for variation is necessary. This study proposes an efficient method for fabricating polymer optical-waveguide devices by introducing the atomic layer deposition (ALD) process. Compared to conventional photoresist or metal-film deposition methods, the ALD process enables more precise fabrication of the optical waveguide's core structure. Polyimide optical waveguides with a core size of 1.8 × 1.6 ㎛² are fabricated using the ALD process, and their propagation losses are measured. Additionally, a multimode interference (MMI) optical-waveguide power-splitter device is fabricated and characterized. Throughout the fabrication, no cracking issues are observed in the etching-mask layer, the vertical profiles of the waveguide patterns are excellent, and the propagation loss is below 1.5 dB/cm. These results confirm that the ALD process is a suitable method for the mass production of high-quality polymer photonic devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1519-1527
• /
• 2020

AGeneral radiation measuring devices have been developed in the form of spatial dose rate detection devices that measure dose rates to radioactive contaminant and 2D or 3D imaging devices for radioactive contamination information. Each of these radiation detection techniques has advantages. The advantages of both detection devices are necessary to minimize personal injury and rapid decontamination in the area of a radioactive accident. In this paper, we proposed a technique that can measure the dose rate and direction information about the radioactive pollutant source in real time using a detection sensor, a rotating body, and a directional shield for radioactive pollutant detection. The rotational-based detection device is configured to check the dose rate and direction using the location information of the rotator and measurement value. We proposed a measurement technique for vertical and horizontal directions through multiple holes. It was confirmed that the measurement error for direction information was less than 1% when detected in the horizontal direction.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.403-410
• /
• 2017

In this paper, the fire extinguisher maintenance system using smart NFC communication and the real-time pressure measurement is proposed. The proposed system consists of three steps in the flow of information. The first step is to identify the fire extinguisher through NFC tagging in the fire extinguisher module using the smart device. The fire extinguisher appearance check and the real-time pressure measurement is performed in the second step, and the last step sends the check status information to the management server. In particular, the actual pressure value is calculated based on the angle of the green area and the indicating needle. Some experiments are conducted so as to verify the proposed system, and as a result, the proposed system shows that the administrator can effectively control the status information of fire safety check.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.66-75
• /
• 2016

Due to aggressive scaling of device sizes and reduced noise margins, physical defects caused by aging and process variation are continuously increasing. Additionally, with scaling limitation of metal wire and the increasing of communication volume, fault tolerant method in manycore network-on-chip (NoC) has been actively researched. However, there are few researches investigating reliability in NoC with voltage-frequency-island (VFI) regime. In this paper, we propose a table-based routing technique that can communicate, even if link failures occur in the VFI NoC. The output port is alternatively selected between best and the detour routing path in order to improve reliability with minimized hardware cost. Experimental results show that the proposed method achieves full coverage within 1% faulty links. Compared to $d^2$-LBDR that also considers a routing method for searching a detour path in real time, the proposed method, on average, produces 0.8% savings in execution time and 15.9% savings in energy consumption.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.129-136
• /
• 2018

The IEC 61850 communication standard is used worldwide, and within the country the new substation is built as a digital substation based on IEC 61850 from 2013, after field tests and R&D from 2007. Research on the development of digital substation operating system has been conducted mainly in large domestic companies, so the IED power application equipment for LCP are developed. However, there is still a lack of research in the field of systems that can accommodate all the field devices used for legacy substation and new digital substation. In this paper, we developed the 48VDC input modules and the 125VDC output modules which can construct proposed field information processing modules to IEC 61850 based type, and verified the field applicability from the state monitoring and control operation tests by using IEC 61850 client authentication program and Wireshark.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.935-941
• /
• 2020

People estimation is important to provide IoT services. Most people counting technologies use camera or sensor data. However, the conventional technologies have the disadvantages of invasion of privacy and the need to install extra infrastructure. This paper proposes a method for estimating the number of people using a Wi-Fi AP. We use channel state information of Wi-Fi and analyze that using deep learning technology. It can be achieved by pre-installed Wi-Fi infrastructure that reduce cost for people estimation and privacy infringement. The proposed algorithm uses a k-binding data for pre-processing process and a 1D-CNN learning model. Two APs were installed to analyze the estimation results of six people. The result of the accurate number estimation was 64.8%, but the result of classifying the number of people into classes showed a high result of 84.5%. This algorithm is expected to be applicable to estimate the density of people in a small space.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.140-147
• /
• 2014

In this paper, we propose a method for real-time depth image refinement. In order to improve the quality of the depth map acquired from Kinect camera, we employ constant memory and texture memory which are suitable for a 2D image processing in the graphics processing unit (GPU). In addition, we applied the joint bilateral filter (JBF) in parallel to accelerate the overall execution. To enhance the quality of the depth image, we applied the JBF hierarchically using the compute unified device architecture (CUDA). Finally, we obtain the refined depth image. Experimental results showed that the proposed real-time depth image refinement algorithm improved the subjective quality of the depth image and the computational time was 260 frames per second.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.273-278
• /
• 2015

In order to meet increasing power demands, electrical capacity of equipment for power transfers should become larger accordingly. The equipment used for producing and delivering high-voltage power is also required to operate with a high degree of reliability. The stable operation of power equipment is a necessity, not an option. The current through the power cable, the only device to deliver high power, generates a Joule heat, which causes a deteriorating process on the cable system. The XLPE cable is manufactured in such a manner that it can operate for 30 years at $90^{\circ}$, but there is no guarantee that each cable will reach its projected lifetime of 30 years. In this paper, we have measured the temperatures of nine power cables in operation, based on the theory of cable longevity. In order to study the relationship between temperature and longevity, we have devised a new set of equipment and installed it at Korea Western Power Co., Ltd. located in Taean.