• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.325-336
• /
• 2013

FlashLinQ, one of the typical D2D communication systems developed by Qualcomm, considers a single-tone communication based distributed channel-aware link scheduling method to realize the link scheduling process with low control overheads. However, considering the frequency selective fading effect of practical multi-path channel, the single-tone based SIR estimation causes a critical scheduling error problem because the received single-tone signal has quite different channel gain at each sub-carrier location. In order to overcome this problem, we propose a novel link scheduling method based on CAZAC (Constant Amplitude Zero Auto-Correlation) sequence for D2D communication system. In the proposed method, each link has a unique offset value set for the generation of CAZAC sequences. CAZAC sequences with the cyclic offsets are transmitted using multiple sub-blocks in the entire bandwidth, and then each device can obtain nearly full-band SIR using a good cyclic cross-correlation property of CAZAC sequence.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.591-593
• /
• 2016

Device-to-device (D2D) communications underlaid cellular infrastructure is an competitive local area services technology to promote spectrum usage for next generation cellular networks. These potential can only be tap through efficient interference coordination. Previous works only concentrated on interference from D2D pairs whiles interference from CUs to D2D pairs were neglected. This work focus on solving uplink interference problem emanating from multiple CUs sharing its resource with multiple D2D pairs. The base station (BS) acting as a supervisor selfishly institute a pricing scheme to manage the interference it experience from D2D pairs based on its Quality of service (QoS) requirement. D2D pairs following the supervisor make power allocation decisions considering the price from the BS in a non-cooperative game fashion. In order for the D2D pairs to also meet their QoS requirement, they suggest a price to the BS called discount price which reflects the interference they receive from the CUs. Finally, we analyze the proposed approach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.9
• /
• pp.557-559
• /
• 2014

We propose an efficient resource allocation scheme based on interference awareness for D2D (Device-to-Device) communication in cellular networks. Recently, many researchers have studied how to allocate frequency resources to DUE (D2D User Equipment) with full interference channel information. However, it is difficult to assume a scenario where instantaneous interference information between the CUE (Cellular UE) and DUE is known to the BS (Base Station). To tackle this problem, we proposed in this paper a new scheme in which the BS allocates a resource to CUE and DUE without a full channel information and can aware interference based on only transmit power and distance between UEs. Simulation results show effectiveness of the proposed scheme.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.2
• /
• pp.191-201
• /
• 2014

A 3D CAD system that can be used on a smart device is proposed. Smart devices are now a part of everyday life and also are widely being used in various industry domains. The proposed 3D CAD system would allow modeling in a rapid and intuitive manner on a smart device when an engineer makes a 3D model of a product while moving in an engineering site. There are several obstacles to develop a 3D CAD system on a smart device such as low computing power and the small screen of smart devices, imprecise touch inputs, and transfer problems of created 3D models between PCs and smart devices. The author discusses the system design of a 3D CAD system on a smart device. The selection of the modeling operations, the assignment of touch gestures to these operations, and the construction of a geometric kernel for creating both meshes and a procedural CAD model are introduced. The proposed CAD system has been implemented for validation by user tests and to demonstrate case studies using test examples. Using the proposed system, it is possible to produce a 3D editable model swiftly and simply in a smart device environment to reduce design time of engineers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.18-25
• /
• 2016

In D2D communications underlaying a multicell network, it is of primary importance to ensure coexistence of cellular links and D2D links with minimal interference. Therefore, resource allocation scheme for D2D links should be designed to limit the interference between cellular links and D2D links. In this paper, we propose an effective resource allocation scheme for multiple D2D links which share the uplink spectrum resource with cellular users in a multicell network. Under the assumption that the locations of users are known to the base station, the proposed scheme allocates cellular resources to D2D links, such that the interference between a cellular link and multiple D2D links is minimized. In particular, we compute two constants from the path loss model and then use the constants to protect both cellular and D2D links. Simulation results are provided to verify the performance of the proposed scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2015

With the recent popularity of smart terminals, the demand for high-data-rate transmission is growing rapidly, which brings a new challenge for the traditional cellular networks. Both device-to-device (D2D) communication and small cells are effective to improve the transmission efficiency of local communication. In this paper, we apply D2D communication into a small cell network system (SNets) and study about the optimization problem of resource allocation for D2D communication. The optimization problem includes system scheduling and resource allocation, which is exponentially complex and the optimal solution is infeasible to achieve. Therefore, in this paper, the optimization problem is decomposed into several smaller problems and a hierarchical scheme is proposed to obtain the solution. The proposed hierarchical scheme consists of three steps: D2D communication groups formation, the estimation of sub-channels needed by each D2D communication group and specific resource allocation. From numerical simulation results, we find that the proposed resource allocation scheme is effective in improving the spectral efficiency and reducing the outage probability of D2D communication.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.684-687
• /
• 2004

We have developed multi-layer passivation films of UV-polymerized film/inorganic composite film to improve the long lifetime of passivated OLEDs for very thin flat panel applications. Preliminary lifetime to half initial luminance ($L_{o}{\sim}\;3,000\;cd/m^2$) of order 300 Hr is achieved on the conventional encapsulated test pixel using a passive matrix drive at room temperature; 570 Hr lifetime is achieved on a de tested multi-layer passivated 9$mm^2$ test pixel.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1415-1423
• /
• 2016

Interference in device-to-device (D2D) communication underlaying cellular network needs to be elaborately investigated because of channel sharing. The objective is to improve the quality of D2D communications while maintaining high performance for cellular users. In this paper, we solve the above problem by jointly considering channel allocation and power control using coalition formation game. Our cooperative game theoric approach allows to enhance network-wide performance. We design a merge-and-split algorithm to deal with the complexity of the combinatorial structure in coalition formation problem. The analytical and numerical results show that our algorithm converges to a stable point which achieves high network performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1511-1517
• /
• 2018

Mobile Device-to-Device (D2D) caching networks can transmit multimedia data to users directly without passing through any network infrastructure by storing popular multimedia contents in advance that are popular among many mobile users at caching server devices (CSDs) in distributed manners. Thus, mobile D2D caching networks can significantly reduce backhaul traffic in wired networks and service latency time of mobile users. In this paper, we propose an efficient transmission scheme that can enhance the transmission efficiency of mobile D2D caching networks by using multiple CSDs that are caching the contents that are popular among mobile users. By sorting the multiple CSDs that are caching a content that mobile users want to receive according to their channel gains, the proposed scheme can reduce the complexity of algorithm significantly, compared to an optimal scheme based on Brute-force searching, and can also obtain much higher network transmission efficiency than the existing Blanket and Opportunistic transmission schemes.

• Journal of information and communication convergence engineering
• /
• v.20 no.3
• /
• pp.143-152
• /
• 2022

The ongoing adoption of 5G will increase the data traffic, throughput, multimedia services, and power consumption for future wireless applications and services, including sensor and mobile networks. Multipath fading on wireless channels also reduces the system performance and increases energy consumption. To address these issues, device-to-device (D2D) and cooperative communications have been proposed. In this study, we propose two inter-clustering models using the relay selection method to improve system performance and increase energy efficiency in cooperative D2D networks. We develop two inter-clustering models and present their respective algorithms. Subsequently, we run a computer simulation to evaluate each model's outage probability (OP) performance, throughput, and energy efficiency. The simulation results show that inter-clustering model II has the lowest OP, highest throughput, and highest energy efficiency compared with inter-clustering model I and the conventional inter-clustering-based multirelay method. These results demonstrate that inter-clustering model II is well-suited for use in 5G overlay D2D and cellular communications.