• Journal of electromagnetic engineering and science
• /
• v.4 no.3
• /
• pp.107-112
• /
• 2004

In this paper, the phase noise of 900 MHz VCO is improved using modified strip line square ring resonator. In order to demonstrate the phase noise improvement of the proposed VCO, the same circuit was manufactured using shorted-circuit resonator. In condition of the same bias current, the phase noise of the proposed VCO with modified square ring resonator is suppressed by 7 dB as - 103 dBc/Hz at 100 kHz offset compared to the conventional VCO with short-circuit resonator. From the proposed VCO, we achieved output power of - 4.8 dBm, harmonics suppression of 16 dB, and tuning bandwidth of 100 MHz. The proposed VCO consumed 5 mA at 3 V, and its size is 1.2 cm ${\times}$ 1.0 cm.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1460-1471
• /
• 2024

2D and 3D ultrasonic imaging has so far not been demonstrated in pure molten lead in the open literature. In this study the development of such an ultrasonic device for imaging is outlined and results from testing at 380 ℃ in lead are presented. The main difficulties were found to be achieving then maintaining suitable wetting while ensuring suitable durability of the device, both due to the harsh nature of molten lead and the elevated temperatures. The successful detection and imaging (2D and 3D), of differently shaped targets, where the features were above the size of the transmitted ultrasound beam was demonstrated.

• Electronics and Telecommunications Trends
• /
• v.28 no.2
• /
• pp.38-49
• /
• 2013

본고에서는 무선랜 기반 근접인식(proximity awareness) 모바일 서비스 제공에 필요한 관련 기술 동향 및 표준현황을 정리한다. 특히 수많은 기기들이 산재하는 모바일 D2D(Device to Device) 통신환경에서 인접 장치 및 서비스 발견 과정에 사용자 개입을 최소화할 수 있도록 접속 대상을 보고 선택하는 방식의 시선통신(look-and-link)과 네트워크 계층의 접속 이전에 주변 디바이스에서 제공되는 서비스를 미리 파악하거나 간단한 정보를 송수신할 수 있는 무결합 메시징(preassociation messaging) 연구동향을 소개한다. 이러한 기술은 셀룰러 중심의 기존 모바일 서비스들과 차별성을 가지며 무선랜 기술을 활용하는 D2D 환경에서 근접인식 모바일 서비스를 활성화할 수 있는 핵심 요소기술로 이용될 것이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.663-671
• /
• 2013

Recently, the Wi-Fi Direct standard based on WLAN is getting more attention as a new technology for enabling D2D(Devide-to-Device) communications on mobile devices. However, due to limited power resource of mobile devices and, an energy inefficiency problem can be an issue. In order to solve this problem, the Wi-Fi Direct defines two power management schemes: Opportunistic scheme and Notice of Absence(NoA) scheme. However, there is no concrete description of which power management scheme would be better for when. In this paper, via comprehensive simulation studies using ns-3, we show that each scheme presents obviously different performance and energy efficiency according to data traffic patterns. We then propose more energy efficient way of dynamically switching the two power management schemes.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.17-21
• /
• 2015

In this paper, we introduce satellite communication for new wireless disaster network to be built on the basis of amateur radio HR (HAM Radio) as a wireless package system, and channel environments of a D2D terminal that tries to connect and communicate with the wireless disaster network. In this disaster network, we propose a LOS component ratio based adaptive channel modeling approach to accurately estimate a variety of channels whose the D2D terminal could have and smoothly transfer to the level of multimedia data based on the Okumura-Hata channel model. As a result of computer simulation, performance of the proposed method was compared with the that of Okumura-Hata model of open area and urban area model and we were confirmed that there is a gain of BER performance from the results of the computer simulation.

• Agricultural and Biosystems Engineering
• /
• v.5 no.2
• /
• pp.45-49
• /
• 2004

Objective of the study was to develop a garlic clove metering device. The metering device consisted of a drum, a bucket and a bucket cover. A garlic clove simulator was designed to simulate motions of garlic cloves in the metering device. Simulation was performed using a multibody dynamic analysis program, RecurDyn version 5.1. Physical properties of garlic cloves such as mass and center of gravity were determined using 3D CAD modeler, IDEAS version 10.0. In order to compare the results of the simulation with actual movement of a garlic, movement of garlic clove was photographed by a high speed camera. A prototype metering device was built and tested under various metering speeds and metering guide angles. At the 12 rpm metering speed, rate of single-clove-discharge was $90.0\%$ and missing rate $1.3\%$ at $5^{\circ}$.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.147-154
• /
• 2020

This study is about the development of ICT-based wearable devices for vision recovery that can cause functional myopia improvement through accommodation training. Vision Training Device(OTUS) is a head mount type wearable device, which naturally stimulates the contraction and relaxation of the ciliary muscles of eye. Users can conduct customized vision training based on personal vision information stored through the device. In the experiment, the effects of improvement of the symptoms by the accommodation training were compared and analysed for the two groups (16 comparative group and 16 accommodation training group) after causing functional myopia. The result showed the functional myopia improved average 0.44D±0.35 (p<0.05) at the accommodation training group compared to the comparative group. This study proved the effectiveness of vision training device(OTUS) on functional myopia, but further clinical trials are judged necessary to prove the possibility of long-term control of the functional myopia.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.6
• /
• pp.1-6
• /
• 2009

An Overtopping Wave Energy Convertor (OWEC) is an offshore wave energy convertor used for collecting overtopping waves and converting the water pressure head into electric power through hydro turbines installed in a vertical duct affixed to the sea bed. A numerical wave tank based on the commercial computational fluid dynamics code Fluent is established for the corresponding analysis. The Reynolds Averaged Navier-Stokes equation and two-phase VOF model are utilized to generate the 2D numerical linear propagating waves, which are validated by the overtopping experiment results. Calculations are made for several incident wave conditions and shape parameters for the overtopping device. Both the incident wave periods and heights have evident effects on the overtopping performance of the OWEC device. The computational analysis demonstrates that the present overtopping device is more compatible with longer incident wave periods.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.706-708
• /
• 1999

In recent years, analog to digital converter is significant component in high frame rate system. But, in the future. as long as minimum line width is reduced, matching between speed and resolution may be worse. In this paper, first-order $\Sigma-\Delta$ analog to digital converter is adopted and designed as its solutions. Hspice simulation is performed, using $0.65{\mu}m$ CMOS 2-poly 2-metal model parameter.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1373-1392
• /
• 2017

WiFi Direct (WD) is a state of the art technology for a Device-to-Device (D2D) communication in 802.11 networks. The performance of the WD system can be significantly affected by some key factors such as the type of application, specifications of MAC and PHY layer parameters, and surrounding environment etc. It is, therefore, important to develop a system model that takes these factors into account. In this paper, we focus on investigating the design parameters of the PHY layer that could maximize the efficiency of the WD 802.11 system. For this purpose, a basic theoretical model is formulated for a WD network under a 2x2 Multiple In Multiple Out (MIMO) TGn channel B model. The design level parameters such as input symbol rate and antenna spacing, as well as the effects of the environment, are thoroughly examined in terms of path gain, spectral density, outage probability and Packet Error Rate (PER). Thereafter, a novel adaptive algorithm is proposed to choose optimal parameters in accordance with the Quality of Experience (QoE) for a targeted application. The simulation results show that the proposed method outperforms the standard method thereby achieving an optimal performance in an adaptive manner.