• Journal of Biomedical Engineering Research
• /
• v.44 no.6
• /
• pp.392-403
• /
• 2023

This study presents a new hybrid fNIRS-EEG system to meet the demand for a lightweight and low-cost sleep pattern monitoring device. For multiple-channel configuration, a six-channel electroencephalogram (EEG) and a functional near-infrared spectroscopy (fNIRS) system with eight photodiodes (PD) and four dual-wavelength LEDs are designed. To enhance the convenience of signal measurement, the device is miniaturized into a patch-like form, enabling simultaneous measurement on the forehead. Due to its fully integrated functionality, the developed system is advantageous for performing sleep stage classification with high-temporal and spatial resolution data. This can be realized by utilizing a two-dimensional (2D) brain activation map based on the concentration changes in oxyhemoglobin and deoxyhemoglobin during sleep stage transitions. For the system verification, the phantom model with known optical properties was tested at first, and then the sleep experiment for a human subject was conducted. The experimental results show that the developed system qualifies as a portable hybrid fNIRS-EEG sleep pattern monitoring device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1547-1556
• /
• 2014

In this paper, we propose cost-effective device-to-device (D2D) advertisement scenario with properties of proximity and timeliness through the convergence of D2D communications and social commerce service. We numerically analyze advertisement dissemination effect of the proposed scenario according to the number of sectors, and demonstrate the performance of the normalized D2D coverage, the average number of D2D users, and the average D2D coverage per user via intensive simulations. We verify the accuracy of the results for our numerical analysis compared with the simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.721-727
• /
• 2016

In this paper, in order to resolve the problem of reduction for D2D (device to device) advertisement dissemination efficiency of conventional dissemination algorithms, we here propose several clustering algorithms (modified single linkage algorithm (MSL), K-means algorithm, and expectation maximization algorithm with Gaussian mixture model (EM)) based advertisement dissemination algorithms to improve advertisement dissemination efficiency in D2D communication networks. Target areas are clustered in several target groups by the proposed clustering algorithms. Then, D2D advertisements are consecutively distributed by using a routing algorithm based on the geographical distribution of the target areas and a relay selection algorithm based on the distance between D2D sender and D2D receiver. Via intensive MATLAB simulations, we analyze the performance excellency of the proposed algorithms with respect to maximum number of relay transmissions and D2D user density ratio in a target area and a non-target area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.195-207
• /
• 2017

Since the smart phone was first introduced, the amount of mobile traffic has increased explosively. The OTT service with personal broadcasting and TV contents and the number of users have been increased in wired network, and there are needs to expand the OTT service to mobile network. In the case of the OTT service in mobile network, the relative small and finite resource may cause the overload of the network due to the massive and high transfer rate. In this paper, we consider a future situation of the OTT user services in the cellular network and propose a novel D2D communication scheme for location-based OTT service, which can reduce and distribute the amount of video traffics. To effectively handle the traffic of OTT services, we propose D2DS and LCS functional blocks in EPC network, which can provide location-based service and D2D management. And, we suggest additional procedures for the location-based service of both content provider and contents receiver UEs with the operation of the proposed D2DS and LCS function block.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.8
• /
• pp.41-51
• /
• 1997

The device simulator (BANDIS) which can analyze efficiently the electrical characteristics of the semiconductor devices under the three dimensional stationary conditions on the IBM PC was developed. Poisson, electon and hole continuity equations are discretized y te galerkin method using a tetrahedron as af finite element. The frontal solver which has exquisite data structures and advanced input/output functions is dused for the matrix solver which needs the highest cost in the three dimensional device simulation. The discretization method of the continuity equations used in BANDIS are compared with that of the scharfetter-gummel method used in the commercial three-dimensional device. To verify an accuracy and the efficiency of the discretization method, the simulation results of the PN junction diode and the BJT from BANDIS are compared with those of the commercial three-dimensiional device simulator such as DAVINCI. The maximum relative error within 2% and the average number of iterations needed for the convergence is decreased by more than 20%. The total simulation time of the BJT with 25542 nodes is decreased to about 60% compared with that of DAVINCI.

• Journal of information and communication convergence engineering
• /
• v.18 no.3
• /
• pp.188-193
• /
• 2020

In this paper, we examine whether the 3D image experience through a light-field display device showed the difference in the arousal of the user compared with the 2D image experience. For our experiment, the Looking Glass^TM (LG) was used as a lightfield display device that provided 3D images, and 2D images were provided by digital and printed images. The subject's facial behavior during each media experience was recorded for analysis and the degree of arousal was measured by FaceReader^TM. As a result, the first image presented in the first order among the three kinds of images showed that there was a statistical difference in the degree of arousal between the three media. However, no significant differences were found between the three media in the other images. This may be because the arousal did not increase from the experience of the second image through the LG, owing to habituation. In conclusion, the 3D imaging experience may appear in the beginning, but does not continue.

• Journal of radiological science and technology
• /
• v.43 no.6
• /
• pp.489-494
• /
• 2020

The Law method is observing the temporal bone. There are two types of methods: the double angle method, which manipulates the center ray angle of the tube twice, and the single angle method, which manipulates once. The purpose is to increase the reproducibility of the image by making vertical incidence by making an assistive device using a 3D printer. Two assistive devices with a wedge-shaped 8.5 × 10 × 2.3 cm, an inclined surface of 7.5 cm, and an inclination angle of 15° were fabricated. Assistive devices can be combined with each other in the form of grooves, and PLA (Poly Lactic Acid) is used as a material. In the first experiment, 10 examiners operated the tube 15° in the caudad direction and 15° in the anterior direction, and measured it with a protractor to conduct a reproducibility experiment. Second, two examiners acquired vertically incidence images using the existing law method and assistive devices, and measured the distance between each measurement point to evaluate the reproducibility. The tube center ray angle reproducibility experiment was not statistically significant, but the angle difference was up to 9° between examiners. The reproducibility experiment of radiographic images was not statistically significant with the conventional method, and the method using an assistive device was statistically significant. Therefore, regardless of skill level, an image capable of securing reproducibility, which is the advantage of vertical incidence, could be obtained.

• Journal of Biomedical Engineering Research
• /
• v.34 no.2
• /
• pp.69-72
• /
• 2013

The goal of this study is to develop test method for evaluating the drug eluting properties of drug eluting stents (DES). PBS and the detergent solutions, presented by each DES manufacturer, were used for drug release of DES coated with paclitaxel, zotarolimus and everolimus. The drugs which are coating DES were not released by PBS but released by the detergent solutions, finally paclitaxel 83.38%, zotarolimus 103.85% and everolimus 115.78%. It seems that the use of the detergents is necessary in order to release the drugs because those drugs are extremely hydrophobic. In conclusion, using of detergent solutions presented by each manufacturer were suitable for evaluating the drug eluting property of drug eluting stent.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1881-1886
• /
• 2016

In this paper, by using D2D communications that perform direct communications among devices within small transmission range of each device without base station, we assume that a device generates and transmits data packets to other proximate devices and the devices which receive the data packets relay those to other adjacent devices. To maximize the total number of devices which successfully receive data packets, Epidemic routing protocol is considered in this paper. In Epidemic routing protocol, all devices which received data packets try to relay the packets to other adjacent devices. We assume various network environment where devices are densely distributed in specific area(crowded area). In this environment, D2D SD can be a source node and D2D devices can be relay nodes. By setting transmission range of D2D SD and D2D devices as parameters, we analyze performance results of coverage probability of Epidemic routing protocol through intensive simulations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.673-681
• /
• 2014

In this paper, a novel low specific on-resistance SOI LDMOS Device with P+P-top layer in the drift region is proposed and investigated using a two dimensional device simulator, MEDICI. The structure is characterized by a heavily-doped $P^+$ region which is connected to the P-top layer in the drift region. The $P^+$ region can modulates the surface electric field profile, increases the drift doping concentration and reduces the sensitivity of the breakdown voltage on the geometry parameters. Compared to the conventional D-RESURF device, a 25.8% decrease in specific on-resistance and a 48.2% increase in figure of merit can be obtained in the novel device. Furthermore, the novel $P^+P$-top device also present cost efficiency due to the fact that the $P^+$ region can be fabricated together with the P-type body contact region without any additional mask.