• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.382-382
• /
• 2010

$TaO_2$ thin films as gate dielectrics have been proposed to overcome the problems of tunneling current and degradation mobility in achieving a thin equivalent oxide thickness. An extremely thin $SiO_2$ layer is used in order to separate the carrier in MOSFETchannel from the dielectric field fluctuation caused by phonons in the dielectric which decreases the carrier mobility. The electronic and optical properties influenced the device performance to a great extent. The atomic structure of amorphous and crystalline Tantalum oxide ($TaO_2$) gate dielectrics thin film on Si (100) were grown by utilizing atomic layer deposition method was examined using Ta-K edge x-ray absorption spectroscopy. By using X-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy (REELS) the electronic and optical properties was obtained. In this study, the band gap (3.400.1 eV) and the optical properties of $TaO_2$ thin films were obtained from the experimental inelastic scattering cross section of reflection electron energy loss spectroscopy (REELS) spectra. EXAFS spectra show that the ordered bonding of Ta-Ta for c-$TaO_2$ which is not for c-$TaO_2$ thin film. The optical properties' e.g., index refractive (n), extinction coefficient (k) and dielectric function ($\varepsilon$) were obtained from REELS spectra by using QUEELS-$\varepsilon$(k, $\omega$)-REELS software shows good agreement with other results. The energy-dependent behaviors of reflection, absorption or transparency in $TaO_2$ thin films also have been determined from the optical properties.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.376-383
• /
• 2019

In recent decades, China's economy has grown rapidly and two-dimensional bar code-based payments services have been activated. This is a model that will be introduced by developing countries that lack mobile payment infrastructure, and countries that are looking to leap into cashless societies are also drawing attention. Along with this, the existing CRM market is expanding around the mobile device called m-CRM, and research is active on the importance of collective use for online advertising and two-dimensional bar code-based payments services. Therefore, through this study, we have explored the concepts and status of online advertising and customer relationship management which using the two-dimensional bar code-based system, and designed and implemented the method and mobile application system to effectively disseminate transactional advertising information at the point of sale or at the point of share. We also presented an application approach to look at the direction of two-dimensional bar code-based ads contents sharing system and its development.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.629-634
• /
• 2016

This paper describes the implementation of a ZigBee sensor node that can be utilized as a multiband and machine to machine (M2M) communication gateway. The IEEE 802.15.4-2003 standard was used as the wireless network frequency band. Ember's Type EM357 SoC was used as the transmission and reception device to perform the communication function, and it was also used for both the main M2M gateway and the sensor node. For the implementation of the operating protocol, EmberZNet Stack 4.5.4 from the Ember Corporation was used. The measurement of the reception sensitivity in the receiving module and the actual output signal from the reference were obtained from the transmission of a packet, and the packet included the M2M gateway within the attached ZigBee sensor. The packet error rate was measured as 0% with a -98 dBm reception sensitivity at the ZigBee frequency. In addition, excellent current characteristics of the ZigBee modules were shown by the implementation of the low-power circuit.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.148-152
• /
• 2005

A novel interferometric isolator has been proposed and designed to fabrticate waveguide magnetooptic isolator operating at a wavelength of $1.55{\cal}um$. The device consists of MMI (multimode interference) couplers and has a magnetooptic guiding layer with different layer structure in arms of the inteferometer. The layer structures in the arms of inteferometer are $HfO_2/CeY_2Fe_5O_{12}/NOG$ and $SiO_2/CeY_2Fe_5O_{12}/NOG$, respectively. This configuration give rise to different nonreciprocal phase shift. In consequence, the isolator operates under a unidirectional magnetic field. The optimized structure of the isolator was determined by a 3D beam propagation method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.511-514
• /
• 2008

2-wavelength type white OLED devices have been made consisted of two layers; a layer with blue light emitting DPVBi host and other EML layer with yellow emitting rubrene dopant. New method to get white emitting device has been suggested by varying thicknesses of the DPVBi layer. The ITO/2-TNATA($150{\AA}$)/NPB($350{\AA}$)/DPVBi($35{\AA}$)/DPVBi:rubrene (2wt%,$200{\AA}$)/DPVBi($100{\AA}$)/Alq_3($50{\AA}$)/LiF($5{\AA}$)/Al($1000{\AA}$) structure has showed optimum results in CIE coordinates of (0.3233, 0.33). OLED devices with this structure has properties of $1.2d/m^2$ at turn-on voltage of 3.9V and $1037cd/m^2$ at 7.9V. This structure has advantages of simple fabrication and easy to emit the white color.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.325-328
• /
• 2020

This paper demonstrated a voltage-controlled oscillator (VCO) using cost-effective (1-poly 6-metal) mixed signal standard CMOS process. To have the high-quality factor inductor in LC resonator with thin metal thickness, patterned-ground shields (PGS) was adopted under the spiral to effectively reduce the ac current of low resistive Si substrate. And, because of thin top-metal compared with that of RF option (2 ㎛), we make electrically connect between the top metal (M6) and the next metal (M5) by great number of via array along the metal traces. The circuit operated from 2.48 GHz to 2.62 GHz tuned by accumulation-mode varactor device. And the measured phase noise of LC VCO has -123.7 dBc/Hz at 1MHz offset at 2.62 GHz and the dc-power consumption shows 2.07 mW with 1.8V supply voltage, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1887-1892
• /
• 2005

In the future, a machine-tool will be more improved in the form of a knowledge evolution based device. In order to develop the knowledge evolution based machine-tool, this paper proposes the structure of standard M2M(Machine To Machine) and the scheme of agent communication in environment. The communication agent such as dialogue agent has a role of interfacing with another machine for cooperation. To design of the communication agent module in M2M environment, FIPA(Foundation of Intelligent Physical Agent) and ping agent based on JADE(Java Agent Development Framework) or FIPA-OS(Open Source) are analyzed in this study. Through this, it is expected that the agent communication can be more efficiently designed and the knowledge evolution based machine-tool can be hereafter more easily implemented.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2648-2653
• /
• 2007

Recently, increasing demand on not only lighter but also extremely mobile battery make micro fuel cell device very attractive alternative. By reducing the size of fuel cell, surface tension becomes dominant factor with minor gravitational effect. Therefore, it is very difficult to detach the $CO_2$ bubble generating on a cathode side in ${\mu}DMFC$ (micro direct methanol fuel cell). The degassing of a $CO_2$ bubble has drawn quite attention especially for ${\mu}DMFC$ due to its considerable effect on overall machine performance. Our attention has been paid to the dynamic behavior of immiscible bubble attached to the one side of the wall on 2D rectangular channel subject to external shear flow. We use Level Contour Reconstruction Method (LCRM) which is simplified version of front tracking method to track the bubble interface motion. Effects of Reynolds number, Weber number, advancing/receding contact angle and property ratio on bubble detachment characteristic has been numerically identified.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1137-1144
• /
• 2012

In this paper, a 2.6 GHz switched parasitic array(SPA) antenna is designed to resolve the device interference in the femtocell. The designed SPA antenna structure consists of a central ${\lambda}/4$ monopole antenna as a radiator and surrounding four parasitic elements operating as a reflector or a director depending on the switching state. In addition, open state monopoles around the parasitic elements are placed to improve the directivity. The designed antenna utilizes RF FETs as switching elements instead of conventional PIN diodes, which enables beam steering with a simple structure consuming low power. To select the proper FET switch, the performance of the SPA antenna depending on the switch characteristics is analyzed. The fabricated antenna has 65 mm radius and 35 mm height, which shows about 15 dB front-back-ratio(FBR) at 2.6 GHz and enables eight-directional beam steering.