• Journal of the Korea Society of Computer and Information
• /
• v.19 no.4
• /
• pp.35-41
• /
• 2014

In this paper, we proposed the implementation of software-based 2D BitBLT engine on the pSOS operating system and the operation of the BitBLT engine on patient monitoring device was verified. To verify the proposed method on the patient monitoring device, we designed prototype PCB board, and verified the operation. We designed the motherboard by using ARM9-based CPU. Because hardware-based BitBLT module was replaced with software-based one, CPU load problem was weighted. To solve this problem, w changed 400Mhz processor instead of 200Mhz processor. We implemented 2D BitBLT kernel module as a device driver which is one of the key elements of a graphics controller GUI in patient monitoring device.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.116-125
• /
• 2006

MEMS and LIGA technologies have been used for fabricating microstructures, but their shape is not 3D because of difficulty for preparation of many masks. To fabricate 3D microstructures, microstereolithography technology based on Digital Micromirror Device($DMD^{TM}$) was introduced. It has no need of masks and is capable of fabricating high aspect ratio microstructures. In this technology, STL file is the standard format as the same of conventional rapid prototyping system, and 3D parts are fabricated by layer-by-layer according to 2D section sliced from STL file. The UV light source is illuminated to DMD which makes bitmap images of 2D section, and they are transferred and focused on resin surface. In this paper, we addressed optical design of microstereolithography system in consideration of light path according to DMD operation and image-forming on the resin surface using optical design program. To verify the performance of implemented microstereolithography system, 3D microstructures with complexity and high aspect ratio were fabricated.

• Annual Conference of KIPS
• /
• 2014.04a
• /
• pp.133-134
• /
• 2014

이동통신망 내에서 셀룰러 주파수를 공유하여 사용하는 D2D(Device-to-Device) 단말들이 밀집한 지역에서는 D2D 단말이 대부분의 자원을 점유하므로 셀룰러 단말이 통신을 할 수 없는 문제점이 있다. 본 논문에서는 이러한 환경에서 셀룰러 통신을 보장하기 위해 셀룰러 단말과 인접한 범위에 있는 일부 D2D 단말에 대한 모드 선택기법을 제안한다. 제안기법은 밀집된 D2D 단말들로 인해 가용자원이 없는 셀룰러 단말의 주변에 있는 D2D 단말을 셀룰러 모드로 전환한다. 이를 통해 셀룰러 단말은 D2D 단말이 밀집한 지역에서 셀룰러 통신에 사용할 자원을 확보하여 셀룰러 통신을 할 수 있다. 시뮬레이션을 통해 이동통신망에서 D2D 밀집지역에 있는 셀룰러 통신의 성능이 향상되었음을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.4835-4855
• /
• 2015

TV white space (TVWS) is showing promise to become the first widespread practical application of cognitive technology. In fact, regulators worldwide are beginning to allow access to the TV band for secondary users, on the provision that they access the geolocation database. Device-to-device (D2D) can improve the spectrum efficiency, but large-scale D2D communications that underlie TVWS may generate undesirable interference to TV receivers and cause severe mutual interference. In this paper, we use an established geolocation database to investigate the power allocation problem, in order to maximize the total sum throughput of D2D links in TVWS while guaranteeing the quality-of-service (QoS) requirement for both D2D links and TV receivers. Firstly, we formulate an optimization problem based on the system model, which is nonconvex and intractable. Secondly, we use an effective approach to convert the original problem into a series of convex problems and we solve these problems using interior point methods that have polynomial computational complexity. Additionally, we propose an iterative algorithm based on the barrier method to locate the optimal solution. Simulation results show that the proposed algorithm has strong performance with high approximation accuracy for both small and large dimensional problems, and it is superior to both the active set algorithm and genetic algorithm.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.589-599
• /
• 2016

Most existing resource management problem models arise from the original desire of allocating resources in either a user-centric or network-centric manner. The difference between their objectives is obvious: user-centric methods attempt to optimize the utility of individual users, whereas network-centric models intend to optimize the collective utilities of the entire network. In this paper, from the above two aspects, we analyze the robust power control problem in device-to-device (D2D) communication underlaying cellular networks, where two types of channel uncertainty set (e.g., ellipsoidal and column-wise) are considered. In the user-centric method, we formulate the problem into the form of a Stackelberg game, where the energy efficiency (EE) of each user is the ingredient of utility function. In order to protect the cellular user equipment's (CUE) uplink transmission, we introduce a price based cost function into the objectives of D2D user equipment (DUE). The existence and uniqueness of the game with the influence of channel uncertainty and price are discussed. In the network-centric method, we aim to maximize the collective EE of CUEs and DUEs. We show that by the appropriate mathematical transformation, the network-centric D2D power control problem has the identical local solution to that of a special case of the user-centric problem, where price plays a key role. Numerical results show the performance of the robust power control algorithms in the user-centric and network-centric models.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.577-584
• /
• 2017

Long Term Evolution device-to-device (LTE D2D) is a key technology to mitigate data traffic load in a cellular system. It facilitates direct data exchange between neighboring users, which is preceded by D2D discovery. Each device advertises its presence to neighboring devices by broadcasting its discovery message. In this paper, we develop a mathematical analysis to assess the probability that discovery messages are successfully transmitted at the D2D discovery stage. We make use of stochastic geometry for modeling spatial statistics of nodes in a two dimensional space. It reflects signal to noise plus interference ratio (SINR) degradation due to resource collision and in-band emission, which leads to the discovery message reception probability being modeled as a function of the distance between the transmitter and the receiver. Numerical results verify that the newly developed analysis accurately estimates discovery message reception probabilities of nodes at the D2D discovery stage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.86-89
• /
• 2002

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 10[mN/m]. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/Poly-${\gamma}$ Benzyl $_D$-Glutamate/Al and Au/Poly-${\gamma}$ Benzyl $_D$-Glutamate/Au; the number of accumulated layers is 1, 3, 5 and 7. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V]. We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system. LB film accumulated by monolayer on an ITO. In the cyclicvoltammetry, An Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode measured in $LiBF_4$ solution, stable up to 0.9V vs. Ag/AgCl.

• The Journal of Korea Robotics Society
• /
• v.17 no.2
• /
• pp.191-197
• /
• 2022

In this research, we developed the muscle-strength-assistant device, named as LEXO-W, and conducted suitability test for army when transporting high weights. LEXO-W relieves the burden when carrying heavy weights by distributing the load concentrated on the arms throughout the body. LEXO-W weighs 4 kg and is designed to handle objects weighing up to 55 kg. To verify the effectiveness of the device, object handling tests (high explosive shell, simple assembly bridges, and ammunition boxes) were conducted. Working time, metabolic rate, and electromyogram (EMG) signals were measured in each test. As a result, it was confirmed that the working time, metabolic rate and EMG signal before and after wearing LEXO-W were decreased. This research has great significance in that it verified the performance of the wearable device from the perspective of military operation.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.225-232
• /
• 2020

The underlaying communication scheme in 5G cellular network is a very promising resource sharing scheme, and it is an effective scheme for improving service performance of 5G and reducing communication load between a cellular link and a device to device (D2D) link. This paper proposes the algorithm to minimize the resource interference that occurs when performing 5G-based multi-class service on gNB(gNodeB) and the cooperative priority-based resource allocation scheduling scheme (CPRAS) to maximize 5G communication service according to the analyzed control conditions of interference. The proposed CPRAS optimizes communication resources for each device, and it optimizes resource allocation according to the service request required for 5G communication and the current state of the network. In addition, the proposed scheme provides a function to guarantee giga-class service by minimizing resource interference between a cellular link and a D2D link in gNB. The simulation results show that the proposed scheme is better system performance than the Pure cellular and Force cellular schemes. In particular, the higher the priority and the higher the cooperative relationship between UE(User Equipment), the proposed scheme shows the more effective control of the resource interference.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.877-887
• /
• 2015

This paper is a first-hand summary on our comprehensive live trial of cellular-assisted device-to-device (D2D) communications currently being ratified by the standards community for next-generation mobile broadband networks. In our test implementation, we employ a full-featured 3GPP LTE network deployment and augment it with all necessary support to provide realtime D2D connectivity over emerging Wi-Fi-Direct (WFD) technology. As a result, our LTE-assisted WFD D2D system enjoys the required flexibility while meeting the existing standards in every feasible detail. Further, this paper provides an account on the extensive measurement campaign conducted with our implementation. The resulting real-world measurements from this campaign quantify the numerical effects of D2D functionality on the resultant system performance. Consequently, they shed light on the general applicability of LTE-assisted WFD solutions and associated operational ranges.