• Journal of Korean Neurosurgical Society
• /
• v.58 no.5
• /
• pp.412-418
• /
• 2015

Objective : To investigate the effects of posterior implant rigidity on spinal kinematics at adjacent levels by utilizing a cadaveric spine model with simulated physiological loading. Methods : Five human lumbar spinal specimens (L3 to S1) were obtained and checked for abnormalities. The fresh specimens were stripped of muscle tissue, with care taken to preserve the spinal ligaments and facet joints. Pedicle screws were implanted in the L4 and L5 vertebrae of each specimen. Specimens were tested under 0 N and 400 N axial loading. Five different posterior rods of various elastic moduli (intact, rubber, low-density polyethylene, aluminum, and titanium) were tested. Segmental range of motion (ROM), center of rotation (COR) and intervertebral disc pressure were investigated. Results : As the rigidity of the posterior rods increased, both the segmental ROM and disc pressure at L4-5 decreased, while those values increased at adjacent levels. Implant stiffness saturation was evident, as the ROM and disc pressure were only marginally increased beyond an implant stiffness of aluminum. Since the disc pressures of adjacent levels were increased by the axial loading, it was shown that the rigidity of the implants influenced the load sharing between the implant and the spinal column. The segmental CORs at the adjacent disc levels translated anteriorly and inferiorly as rigidity of the device increased. Conclusion : These biomechanical findings indicate that the rigidity of the dynamic stabilization implant and physiological loading play significant roles on spinal kinematics at adjacent disc levels, and will aid in further device development.

• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.545-551
• /
• 2009

In this paper, we propose the secure key management framework to connect USN with different network. Although connected USN with different network has no CA (Certificate Authority), it is important to use public key based cryptography system because this network consists of numerous devices. The proposed mechanisms focus on device authentication and public/private key management without existing PKI system of IP network. To solve no CA and certificate problems, the IDC (Identity Based Cryptography) concept is adopted in our proposed mechanism. To verify the possibility of realization, we make an effort to implement the proposed mechanisms to real system. In the test bed, both USN and PLC network are connected to IP network; and proposed mechanisms are implemented to PLC and sensor devices. Through this test using the proposed mechanism, we met the similar performance with symmetric algorithms on key generation and update process. Also, we confirmed possibility of connection between different network and device authentication.

• The Journal of Korean Association of Computer Education
• /
• v.13 no.1
• /
• pp.53-64
• /
• 2010

In this paper, we tried to enable a mobile device as a resource to access to mobile grid networks. By advanced Internet techniques, the use of mobile devices has been rapidly increased. Some researches in mobile grid computing tried to combine grid computing with mobile devices. However, according to intrinsic properties of mobile environments, mobile devices have many considerations, such as mobility management, disconnected operation, device heterogeneity, service discovery, resource sharing, security, and so on. To solve these problems, there are two trends for mobile grid computing: a proxy-based mobile grid architecture and an agent-based mobile grid architecture. We focus on a proxy-based mobile grid architecture with IP-paging, which can easily manage idle mobile devices and grid resource status information. Also, we use SIP(Session Initiation Protocol)to support mobility management, mobile grid services. We manage variation of mobile device state and power by paging cache. Finally, using the candidate set and the reservation set of resources, we perform task migration. The performance evaluation by simulation, shows improvement of efficiency and stability during execution.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.1-6
• /
• 2015

The IoT(Internet of things) technology enable objects around user to be connected with each other for sharing information. To support security is the mandatory requirement in IoT because it is related to the disclosure of private information but also directly related to the human safety. However, it is difficult to apply traditional security mechanism into lightweight devices. This is owing to the fact that many IoT devices are generally resource constrained and powered by battery. PSK(Pre-Shared Key) based approach, which share secret key in advance between communication entities thereafter operate security functions, is suitable for light-weight device. That is because PSK is costly efficient than a session key establishment approach based on public key algorithm. However, how to safely set a PSK of the lightweight device in advance is a difficult issue because input/output interfaces such as keyboard or display are constrained in general lightweight devices. To solve the problem, we propose and develop a secure PSK configuration scheme for resource constrained devices in IoT.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.3
• /
• pp.397-405
• /
• 1995

In order to operate the automatic devices of manufacturing process more efficiently and to solve the needs of the resource sharing,network technology is applied to the unit control devices located in common manufacturing zone and operated by connecting them.In this paper,functional standard of the network operation layer is set as MAP standard application layer of MMS(manufacturing message standard)for the cell or group,which is suggested by CIM (computer integrated manufacturing) standardization as common manufacturing zone.MMS is composed of abstract message which is not consider specific devices.Then,specific message standard must be defined to operate MMS.It is designed as VMD (virtual manufacturing device)objects which are abstract objects to perform group management based on the companion standard.Also they are operated in the group management model system.Group management operation takes multicast communication method which is the communication from single source to the multiple sinks, and the group management system and unit control devices are performed as VMD and real device mapping.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.574-577
• /
• 2014

Multimedia contents sharing services based on DLNA (Digital Living Network Alliance) technology such as Allshare or Smartshare in wireless home networks is widely adapted in Korea. However, the characteristics of the wireless network - frequently fluctuated bandwidth and signal strength could degrade the quality perceived by users. To minimize the impact of the challenge there are active researches in dynamic adaptive streaming. This paper proposes a dynamic adaptive streaming approach designed in a wireless network taking into account of the specifications of the user device such as resolution and processor. We modify the Kalman filter considering the characteristics of the device and demonstrate that the proposed approach determines Bit Rate using the modified filter.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.47-56
• /
• 2015

Recently, there has been an increase in the number of people who use the smart-phone navigation for using various latest functions such as group driving and location sharing. But smart-phone has a limited storage space for one application, since a lot of applications with different purposes are installed in the smart-phone. For this reason, road network data with a large space of memory used for map matching in the device for navigation cannot be stored in the smart-phone for this reason map matching is impossible. Besides, smart-phone which doesn't use the external GPS device, provides inaccurate GPS information, compared to the device for navigation. This is why the smart-phone navigation is hard to provide accurate location determination. Therefore, this study aims to help map matching that is more accurate than the existing device for navigation, by reducing the capacity of road network data used in the device for navigation through format design of a new road network and conversion and using a database of driver's driving patterns. In conclusion, more accurate map matching was possible in the smart-phone by using a storage space more than 80% less than existing device at the intersection where many roads cross, the building forest that a lot of GPS errors occur, the narrow roads close to the highway. It is considered that more accurate location-based service would be available not only in the navigation but also in various applications using GPS information and map in the future Navigation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.10-21
• /
• 2015

Cellular Network assisted device-to-device (D2D) communication has been growing to reduce the overload of eNodeB and mitigate the frequency shortage. However, by sharing the uplink frequency resource with the cellular network, the interference between cellular and D2D is increased. In this paper, we propose the advanced receiver based on soft decision to reduce the interference between cellular and D2D. The proposed receiver can suppress and cancel the interference by calculating the unbiased estimation value of interference signal using minimum mean square error (MMSE) or interference rejection combing (IRC) receiver. The interference signal is updated using soft information expressed by log-likelihood ratio (LLR). We perform a system level simulation based on the 20-MHz bandwidth of the 3GPP LTE-A system. Simulation results show that the proposed receiver can improve SINR, throughput and spectral efficiency compared to conventional receivers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.639-646
• /
• 2005

As the internet communication is prevalent in recent years, it becomes quite possible to monitor and control some mechanical plants from the remote place through the TCP/IP communication. Such a concept is expected to be applied to many industrial systems fur easy maintenance and trouble shooting as well as various kinds of expensive test equipments fo. sharing. Synthetic jet actuate.(SJA) is a kind of high-lifting device to prevent flow separation at high angle of attack and its use for flow control has received a great amount of attention. In this research, remote control and data monitoring system for SJA wind tunnel test is implemented by TCP/IP communication with DSP as a embedded web server. From the tests performed with embedded server, it showed the possibility of reliable remote control system design utilizing the internet communication.

• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.33-46
• /
• 2011

This research focus on the economic activity as consumer and producer traits of future customers in the convergence age. We assess level of convergence for digital devices and services respectively by questionnaire survey and interview for 14 professions. And then, for evaluating convergence level and usage of digital services of each respondents, we conducted the questionnaire survey for 343 samples. Findings of our research hold that the group who showed higher level of convergence tends to use the socialized digital services more. Convergence generation were heavy users in appstore on smart-phone and wireless game and more participating. In digital service area, facebook/cyworld, twitter, UCC, portal, internet community in digital service. Convergence generation are global network communication, buying decision making activity, actively opinion expression, prosumer attitude, dependency on digital device, experience based purchase behavior, enthusiastic information sharing.