• 대한의용생체공학회:의공학회지
• /
• 제40권6호
• /
• pp.230-234
• /
• 2019

Medical laser equipment using optical energy is used to surgery and treat diseases by destroying and removing tissue. Domestic laser equipment has been used steadily in the skin and cosmetics sectors and has been changed to radiate high-power energy in a wide range to shorten patient treatment time. However, side effects such as burns and damage of normal tissues occurred. To solve this problem, techniques for detecting lesions using an imaging device and selectively radiating the laser have been developed. In this study, we proposed an evaluation method to evaluate the safety and performance of target detection accuracy, laser irradiation accuracy and motion protection device technology derived from product analysis and investigation. Finally, the validity of the evaluation method was evaluated by evaluating the imaging device based laser equipment as the proposed evaluation method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.81-85
• /
• 2009

This study was to execute the basic property evaluation of recycled sand which produced by the sand flux device in order to evaluate the performance of differences between small large sand flux device. As a result, this study has found out that the recycled sand after passing the sand flux device had excellent quality characteristics compared with the One before passing the device. In additional experiment On the basic material properties, this study showed a tendency to improve the quality and performance significantly in case of fineness modulus, absolute surface dried density, 0.08mm sieve throughput, volume of clay lumps, and content of organic foreign matter. In conclusion, it was considered as various quality performances of recycled sand were improved through the production stage of prototype.

• 대한기계학회논문집A
• /
• 제37권12호
• /
• pp.1521-1527
• /
• 2013

본 논문에서는 마스터 조정자인 인간의 근육강도과 관절변위를 측정하여 슬레이브장치가 외부환경에 맞는 작업능력을 발휘할 수 있는 마스터/슬레이브 원격조정시스템을 제안한다. 외골격형 기구부와 경량의 관성센서를 사용하여 마스터 착용자의 편리성을 높였으며 인간의 근육과 동일한 운동특성을 가진 공압인공근육으로 슬레이브 기구장치를 구성하여 운동의 모사능력을 향상시켰다. 실험을 통해서 단순히 마스터의 위치정보만 전달하는 원격조정에 비해서 제안된 마스터는 인간 조정자가 근력의 세기를 조절함으로써 슬레이브에 작용하는 가반하중의 변화에 관계없이 균일한 제어성능을 가질 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권9호
• /
• pp.4484-4501
• /
• 2019

In this paper, we put forward a delay-aware secure maximum distance separable (MDS) coded caching scheme to resist the eavesdropping attacks for device-to-device (D2D) content sharing by combining MDS coding with distributed caching. In particular, we define the average system delay to show the potential coupling of delay-content awareness, and learn the secure constraints to ensure that randomly distributed eavesdroppers cannot obtain enough encoded packets to recover their desired contents. Accordingly, we model such a caching problem as an optimization problem to minimize the average system delay with secure constraints and simplify it to its convex relaxation. Then we develop a delay-aware secure MDS coded caching algorithm to obtain the optimal caching policy. Extensive numerical results are provided to demonstrate the excellent performance of our proposed algorithm. Compared with the random coded caching scheme, uniform coded caching scheme and popularity based coded caching scheme, our proposed scheme has 3.7%, 3.3% and 0.7% performance gains, respectively.

• 대한건축학회논문집:구조계
• /
• 제35권2호
• /
• pp.37-44
• /
• 2019

The primary objective of this study is to develop a prototype of all-in-one attachment-based PHC pile head cutting robot that improves the conventional work in safety, productivity, and quality. For this, the following research works are conducted sequentially; 1)literature review, 2)development of an all-in-one attachment-based PHC pile head cutting robot prototype, 3)performance evaluation of each device, 4)economic analysis of an automated method. As a result, PHC pile cutting level sensing device, PHC pile cutting device, PHC pile handling device are developed. Futhermore, working process of an automated method is developed based on result of performance evaluation. According to the economic analysis result, the cost of the automated method was 21.37% less than that of the conventional method, and the economic efficiency was also superior(ROR 215.44%, Break-even Point 5.52month). It is expected that conclusions for future improvements are used in the development of the all-in-one attachment-based PHC pile head cutting robot to practical use.

• 한국군사과학기술학회지
• /
• 제24권2호
• /
• pp.204-210
• /
• 2021

In this paper, we studied a method of wirelessly checking up the POD for captive flight tests which is performed during the development of guided weapons systems. The wireless power transfer module, the power distribution device, and the battery pack were designed to wirelessly power the captive flight test POD, and the communication device was designed to enable wireless communication between the POD and the check-up device. The communication device was designed to enable WiFi, IR communication, and laser diode communication, so that various communication methods could be tested. Through the performance test, it was confirmed that power was stably supplied to the captive flight test POD, and the wireless communication performance was verified by measuring the delay time and error rate. As a result, by using our system the POD check-up for the captive flight test was performed wirelessly and the data of the captive equipment could be obtained effectively.

• 대한의용생체공학회:의공학회지
• /
• 제33권2호
• /
• pp.89-97
• /
• 2012

The purpose of this study is to develop the guideline of the physicochemical and mechanical properties evaluation for silicone gel filled breast implants. First of all, the use and development status for silicone gel filled breast implants were investigated, and then, standard and criteria about performance evaluation established by the international organizations such as ASTM, FDA guidance and ISO were examined. To evaluate the mechanical properties, data research and testing for breaking strength, elongation, tensile set, joint intensity, silicone gel cohesion, weight loss from heating, static rupture resistance, impact resistance test, fatigue test, and gel bleed were performed. On the other hand, to evaluate the physicochemical properties, volatile matter, extent of cross linking, heavy metals, and extractable were analyzed. In this study, results for general function, mechanical properties and physicochemical properties were examined and reviewed for the accordance with international standard, and objective and standardized guideline was provided.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.409-422
• /
• 2016

A parametric study based on an unsteady mathematical model of a pyrotechnically actuated device was performed for design optimization. The model simulates time histories for the chamber pressure, temperature, mass transfer and pin motion. It is validated through a comparison with experimentally measured pressure and pin displacement. Parametric analyses were conducted to observe the detailed effects of the design parameters using a validated performance analysis code. The detailed effects of the design variables on the performance were evaluated using the one-at-a-time (OAT) method, while the scatter plot method was used to evaluate relative sensitivity. Finally, the design optimization was conducted by employing a genetic algorithm (GA). Six major design parameters for the GA were chosen based on the results of the sensitivity analysis. A fitness function was suggested, which included the following targets: minimum explosive mass for the uniform ignition (small deviation), light casing weight, short operational time, allowable pyrotechnic shock force and finally the designated pin kinetic energy. The propellant mass and cross-sectional area were the first and the second most sensitive parameters, which significantly affected the pin's kinetic energy. Even though the peak chamber pressure decreased, the pin kinetic energy maintained its designated value because the widened pin cross-sectional area induced enough force at low pressure.

• 에너지공학
• /
• 제14권3호
• /
• pp.194-202
• /
• 2005

본 연구는 다양한 수직 액막형 흡수기에서 열 및 물질전달 과정에 따른 흡수 특성 예측을 이론 및 실험적으로 수행하였다. 열 및 물질전달 향상은 해석적으로 조사되었으며, 흡수 성능에 대한 유동 형태, 삽입기구 및 주름에 의한 형상 변수의 영향 등을 조사하였다. 특히, 최대 흡수 성능에 대한 동적 변수(수용액 유량, 유동형태)와 흡수기 형상(ID=22.8mm, L=1150m)의 최적값을 수치 해석적으로 예측하였다 수치 해석 및 실험에서 최대 흡수 성능은 삽입기구(스프링)에 의한 파동 유동에서 나타났다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권12호
• /
• pp.1199-1203
• /
• 2010

컴퓨터 시스템에서 Host와 저장장치간의 데이터 이동은 섹터를 기본 단위로 하고 있는데, 섹터 사이즈는 시스템마다 다른 가변적인 크기일 수 있다. 낸드 플래시 메모리는 구조상 페이지 사이즈와 섹터 사이즈 사이의 상관관계에 있어서, 섹터 사이즈가 낸드 플래시 메모리를 관리하는 방식에 상당한 영향을 미친다. 본 논문에서는 낸드 플래시 메모리 기반의 저장장치에서 효율적인 다중 섹터 사이즈를 지원하는 FTL 매핑 관리 기법을 제안하고, 그 관리 방법과 성능에 관하여 분석하여 본다. 본 논문에서 제안한 방식에 의하면 다중 섹터를 지원하는 낸드 플래시 메모리 저장장치를 효율적으로 관리하여 줄 수 있다.