• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4489-4493
• /
• 2014

LED light driving device has problems in efficiency and heating at higher than 150W. In addition, there is inconvenience in replacing the lighting device to another when W is not the same as the previous one. In this paper, a multi-channel LED light driver, driver embedded driver circuit in a multi-channel structure with a power system in the driver-interlocking structure was designed. With the auto control converter structure with a power efficiency above 93% and power factor above 0.98, the weight of the high efficiency LED lighting-actuating device in driver-interlocking structure, a driver in self-calibrating self-optimization structure. In this paper, at below 10% THD, the existing converter contrast weight was reduced by 40% or more.

• Korean Journal of Materials Research
• /
• v.18 no.11
• /
• pp.571-576
• /
• 2008

The simulation program for solar cells, PC1D, was briefly reviewed and the device modeling of a multicrystalline Si solar cell using the program was carried out to understand the internal operating principles. The effects of design parameters on the light absorption and the quantum efficiency were investigated and strategies to reduce carrier recombination, such as back surface field and surface passivation, were also characterized with the numerical simulation. In every step of the process, efficiency improvements for the key performance characteristics of the model device were determined and compared with the properties of the solar cell, whose efficiency (20.3%) has been confirmed as the highest in multicrystalline Si devices. In this simulation work, it was found that the conversion efficiency of the prototype model (13.6%) can be increased up to 20.7% after the optimization of design parameters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.439-440
• /
• 2007

To enhance the electron injection from the cathode of organic light-emitting diodes (OLEDs), We have studied characteristics of device that electron injection layer(EIL) is inserted between emissive layer and cathode. We fabricated bi-layer cathode $Li_2O$(x nm)/Al(100nm) and LiF(x nm)/Al(100nm) using LiF and $Li_2O$ as an electron injection layer. We analyzed the current efficiency, luminance efficiency, and external quantum efficiency of the device by varying the thickness of $Li_2O$ and LiF to be 0.5nm, 1nm, or 3nm. Using the EIL, we have obtained the efficiency of 7cd/A and the luminance of $20,000cd/m^2$. There is an improvement of efficiency by more than 3 times than the device without the $Li_2O$ layer.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.2
• /
• pp.98-101
• /
• 2012

I studied the stability of organic photovoltaic cells in terms of P3HT:PCBM-71 blend ratio as a function of storage time. I obtained the best cell performance by optimizing the blend ratio of electron donor and electron acceptor within the active layer. In this study, I found that the more the P3HT:PCBM ratio increases within the active layer, the more the cell efficiency decreases as the storage time increases. As a result, the best optimized blend ratio was the 1:0.6 ratio of P3HT:PCBM-71, and cell efficiency of the device with the 1:0.6 blend ratio was 4.49%. The device with the best cell efficiency showed good stability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.724-726
• /
• 2004

Highly efficient blue organic light-emitting devices (OLEDs) utilizing the idea of copper phthalocyanine (CuPc)/N,N'-bis-(1-naphthyl)-N,N'-diphenyl,1,1'-biphenyl- 4,4'-diamine (NPB) composite hole transport layer (CPHTL) have been fabricated. The effect of inserting CPHTL upon the performance of blue OLEDs with 2-methyl-9,10-di(2-naphthyl)anthracene (MADN) as the blue emitter has been investigated. Compared with the luminous efficiency of the standard blue device without CPHTL (1.33 cd/A), that of the device with 40:60 CuPc/NPB CPHTL has been increased by more than twice up to 2.96 cd/A with a Commission Internationale d'Eclairage (CIE) coordinates of(x = 0.15, y = 0.10) and a power efficiency of 1.46 lm/W (20 mA/$cm^2$) at 6.39 V. The increased device efficiency is attributed to an improved balance between hole and electron currents arriving at the recombination zone.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1332-1335
• /
• 2003

This paper presents the enhancement of oxygen transfer efficiency using the vibrating intravascular lung assist device (VIVLAD) in in-vitro experiments for patients having chronic respiratory problems. The test section was a cylinder duct with the inner diameter of 30 mm. The flow rate was controlled by the pump and monitored by a built-in flow meter. The vibration apparatus was composed of a piezo-vibrator, a function generator. and a power amplifier. The direction of vibration was radial to the fluid flow. Gas flow rates of up to 6 l/min through the 120-cm-Jong hollow fibers have been achieved by exciting a piezo-vibrator. The output of PVDF sensor were investigated by various frequencies in VIVLAD. The experimental results showed that VIVLAD would be enhance oxygen transfer efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.125-126
• /
• 2000

We report the use of fluorene based copolymers containing quinoline(POF66, PIF66) and pyridine(PFPV) units as electron transporting polymers for multi-layered LEDs. Double-layer device structure combining PIF66 as electron-transporting layer with the emissive MEHPPV showed a maximum quantum efficiency of 0.03%, which is 30 fold increased compared with ITO/MEHPPV/Al single-layer device. PFPV layer increased the quantum efficiency up to 0.1% in the device structure of ITO/(P-3:PVK)/PFPV/Al. The ETL with the electron deficient moiety improved the LED performance by the characteristics of electron transporting as well as hole blocking between emissive layer and metal cathode.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.85-86
• /
• 2015

In this paper, the bidirectional DC-DC converter is composed of the 900V Silicon-Carbide(SiC) devices to get high efficiency. The 900V SiC device is better than a similar current rated traditional SiC device. it has a lower drain-source resistance and output capacitance. therefore it can reduce the switching and the conduction losses of the DC-DC converter. The experimental results verify the improvement of efficiency and usefulness of 900V SiC device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.452-458
• /
• 2022

The electro-thermal erasing (ETE) configuration utilizes Joule heating intentionally generated at word-line (WL). The elevated temperature by heat physically removes stored electrons permanently within a very short time. Though the ETE configuration is a promising next generation NAND flash memory candidate, a consideration of power efficiency and erasing speed with respect to device structure and its scaling has not yet been demonstrated. In this context, based on 3-dimensional (3-D) thermal simulations, this paper discusses the impact of device structure and scaling on ETE efficiency. The results are used to produce guidelines for ETEs that will have lower power consumption and faster speed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.258-269
• /
• 2022

In these days, innovative functions are required to unmanned parcel delivery lockers. As non-face-to-face transactions become the center due to the recent COVID-19 pandemic, many problem occurs in society such as theft crimes and lack of loading space. Therefore, New concept storage device is developed in korea. It has the functions that minimizes empty spaces by using the internal transport device to enable efficient space loading and refrigerate goods such as foods. In order to systematically approach the system design of the unmanned parcel delivery lockers which is the new function is applied, We applied model-based system engineering to improve the development efficiency and use a system modeling language to express the system. We conducted interworking research of CAD data including system modeling and design data. it is expected that this method will increase the effective development efficiency such as maintenance traceability and reduction of development period and cost.