• 제목/요약/키워드: Deviation ratio

검색결과 919건 처리시간 0.031초

비대칭 이중게이트 MOSFET에서 상단과 하단 산화막 두께비가 문턱전압이하 스윙에 미치는 영향 (Influence of Ratio of Top and Bottom Oxide Thickness on Subthreshold Swing for Asymmetric Double Gate MOSFET)

  • 정학기
    • 한국정보통신학회논문지
    • /
    • 제20권3호
    • /
    • pp.571-576
    • /
    • 2016
  • 비대칭 이중게이트 MOSFET는 다른 상하단 게이트 산화막 두께를 갖는다. 상하단 게이트 산화막 두께 비에 대한 문턱전압이하 스윙 및 전도중심의 변화에 대하여 분석하고자한다. 문턱전압이하 스윙은 전도중심에 따라 변화하며 전도중심은 상하단의 산화막 두께에 따라 변화한다. 비대칭 이중게이트 MOSFET는 문턱전압이하 스윙의 저하 등 단채널효과를 감소시키기에 유용한 소자로 알려져 있다. 포아송방정식의 해석학적 해를 이용하여 문턱전압이하 스윙을 유도하였으며 상하단의 산화막 두께 비가 전도중심 및 문턱전압이하 스윙에 미치는 영향을 분석하였다. 문턱전압이하 스윙 및 전도중심은 상하단 게이트 산화막 두께 비에 따라 큰 변화를 나타냈다. 특히 하단 게이트 전압은 문턱전압이하 스윙에 큰 영향을 미치며 하단게이트 전압이 0.7V 일 때 $0<t_{ox2}/t_{ox1}<5$의 범위에서 문턱전압이하 스윙이 약 200 mV/dec 정도 변화하는 것을 알 수 있었다.

CARS를 이용한 희박 예혼합 가스터빈 연소기내 온도 측정 (2);당량비가 위상별 온도에 미치는 영향 (Phase-resolved CARS Temperature Measurements in a Lean Premixed Gas Turbine Combustor (2);Effect of equivalence ratio on phase-resolved gas temperature)

  • 이종호;문건필;박철웅;한재원;전충환;장영준
    • 한국연소학회:학술대회논문집
    • /
    • 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.103-108
    • /
    • 2003
  • The effect of equivalence ratio and fuel/air mixing quality on the phase-resolved gas temperatures at different phases of the oscillating pressure cycle was experimentally investigated. An atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane with heat release rate of 1.59kW was used. Temperature measurements were made using coherent anti-Stokes Raman spectroscopy (CARS) at several spatial locations for typical unstable combustion conditions. Analysis was conducted using parameters such as phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs). Also the probability on the occurrence of high temperature (over 1900K) was investigated to get the information on the perturbation of equivalence ratio and NOx emission characteristics. It was shown that most of temperature histograms exhibit Gaussian profile which has short breadth of temperature fluctuation at equivalence ratio of 0.6, while beta profile was predominant for the cases of other equivalence ratios (${\Phi}$=0.55, 0.50). The characteristics on the occurrence of high temperature also displayed periodic wave form which is very similar to the pressure signal. And the amplitude of this profile goes larger as the fuel/air mixing quality become poorer. These also provided additional information on the perturbation of equivalence ratio at flame as well as NOx emission characteristics.

  • PDF

알루미늄 플레이트-핀 열교환기의 분배기 형상비에 따른 분배특성에 관한 해석적 연구 (Numerical Study on the Distribution Characteristics of Aluminum Plate-Fin Heat Exchangers According to the Distributor Aspect Ratio)

  • 이응찬;강훈;허재혁;김용찬;박재홍;조성열
    • 대한기계학회논문집B
    • /
    • 제35권8호
    • /
    • pp.805-814
    • /
    • 2011
  • 알루미늄 플레이트-핀 열교환기는 석유 및 가스 처리공정에서 널리 사용되고 있다. 알루미늄 플레이트-핀 열교환기의 성능은 각 유체의 헤더 및 분배기에서의 분배 성능에 의하여 크게 영향을 받는다. 본 연구에서는 CFD(Computational fluid dynamics)를 이용하여 알루미늄 플레이트-핀 열교환기의 측면 입구 형태의 분배기를 모델링하고, 입구 조건과 형상비의 변화에 따른 상대 및 절대 불균등 분배도를 고찰하여 최적 분배기 형상비를 제시하였다.

해수침투 발생 시 혼합비 계산의 오차에 관한 연구 (A study on propagation of uncertainties for a mixing ratio calculation by seawater intrusion)

  • 이정훈
    • 지질학회지
    • /
    • 제54권5호
    • /
    • pp.579-584
    • /
    • 2018
  • 해수침투가 발생할 때 혼합비를 결정하는 것은 해수침투연구에 매우 중요한 사항이며, 단성분 혼합분석방법을 주로 사용한다. 본 연구에서는 이러한 해수와 담수의 혼합비 계산시 발생되는 오차를 불확정성의 원리를 이용하여 결정하였다. 또한 해수침투 혼합비를 계산할 때 평균값과 표준편차의 차이에 의해 발생할 수 있는 혼합비의 오차를 제시하였다. 이러한 오차의 크기는 (1) 혼합비가 커질수록, (2) 사용된 평균값과 표준편차값의 차이가 클수록, 마지막으로 (3) 해수와 배경지하수의 추적자 농도 값이 작을수록 커진다. 특히, 해수침투가 발생하여 양이온교환반응이 일어날 때 이온델타(이론적인 지하수화학성분과 실제 시료의 화학성분의 차이)값이 0 근처에서는 오차값이 지구화학적인 상태(침전 또는 용해)를 결정하는 데에 기여할 수 있다.

부등침하를 받는 회전 쉘의 최대응답 추정에 관한 연구 (A Study on Maximum Responses of Rotational Shells Subjected to Uneven Settlements by Stochastic Method)

  • 정명채
    • 전산구조공학
    • /
    • 제10권3호
    • /
    • pp.175-184
    • /
    • 1997
  • 본 논문의 목적은 부등침하를 받는 회전 쉘의 최대 응답과 표준편차와의 관계를 규명하는 것이다. 이를 위해 표준편차에 대한 최대응답의 비(.eta.)및 그 개략값(.eta./sub apr/)를 통계적 수법으로 조사하였다. 또한 탁월차수(predoninant harmonic number)의 함수로 표현되는 .eta./sub apr/을 구하기 위한 식을 제안하였다. 한편 침하는 Fourier급수로 표시하였다. 이때 각 항은 2개의 계수를 포함하게 되는데 하나는 진폭 스펙트럼이고 다른 하나는 위상각이다. 여기서는 위상각은 확률변수로, 진폭은 확정값으로 가정하였다. 해석에서는 .eta., .eta./sub apr/의 특성을 조사하기 위해 2가지 type의 진폭 스펙트럼을 실측데이터를 근거로 설정한 후, 각 type에 대해 100 sample씩의 위상각을 가정하여 사용하였다. .eta.,.eta./sub apr/은 응답의 종류, 쉘의 위치 그리고 진폭 스텍트럼의 type에 상관없이 거의 일정한 값으로 분포하며 그 값은 2.0에서 2.5사이의 값이 된다. 또한 .eta./sub apr/의 값은 .eta.의 값과 거의 비슷하지만 약간 큰 값으로 나타났다. 결론으로 부등침하를 받는 회전 쉘의 최대 응답은 표준편차의 .eta./sub apr/(약 2.5)배 임을 밝히고 있다.

  • PDF

상하악 악교정수술 후 입술 기울기변화 (CHANGE OF LIP CANTING AFTER BIMAXILLARY ORTHOGNATHIC SURGERY)

  • 이준휘;홍종락;김영호
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제33권6호
    • /
    • pp.643-647
    • /
    • 2007
  • Purpose: The purpose of study was to investigate the correlationship between lip canting change and occlusal canting change after bimaxillary orthognathic surgery, and the ratio of lip canting change and occlusal canting change after the surgery. Patients and methods: The subjects for this study was obtained from a group of 25 patients who took bimaxillary orthognathic surgery for occlusal canting correction at the Department of the Oral and Maxillofacial Surgery, Samsung Medical Center in Seoul, Korea between January 2000 and December 2005 and a patient's chart had to contain a resting frontal facial photograph in natural head position and a corresponding PA cephalogram in occlusion on the same day before the surgery and post-op 6 months later. The lip canting change was assessed with the angle each labial commissure and the bipupilary reference line. And, the occlusal caning change in the frontal plane was assessed with the angle between the each maxillary first molar occulasal surface and the bi-frontozygomatic suture reference line. Results: In angular measurement, average occlusal canting change was $3.09^{\circ}$ and standard deviation was $1.05^{\circ}$, average lip canting change was $1.56^{\circ}$ and standard deviation was $1.05^{\circ}$. In linear measurement, average occlusal canting change was 2.41mm and standard deviation was 2.75mm, average lip canting change was 1.18mm and standard deviation was 0.43mm. Lip canting correction ration to occlusal canting correction was 51.5(${\pm}8.4$)% in angular measurement and 48.8(${\pm}9.1$)% in linear measurement. Under Pearson's correlation analysis, Pearson's correlation coefficient was 0.869 in angular measurement and 0.887 in linear measurement(p-value < 0.01). High correlationship was shown between occlusal canting change and lip canting change. Conclusion: First, Bimaxillary orthognathic surgery can correct lip canting as well as occlusal canting. Second, The average amount of lip canting correction is $51.5{\pm}8.4%,\;48.8{\pm}9.1%$ of occlusal canting correction in the study.

3D TV 시청으로 유발된 시각피로가 자율신경계 기능에 미치는 영향 (Autonomic Nervous System response affected by 3D visual fatigue evoked during watching 3D TV)

  • 박상인;황민철;김종화;문성철;안상민
    • 감성과학
    • /
    • 제14권4호
    • /
    • pp.653-662
    • /
    • 2011
  • 최근 3D TV 보급과 확산에 따른 시각 피로문제가 대두되면서 시각 기능과 인지적 관점에서의 연구가 활발하다. 그러나 3D 시각피로가 자율신경계 기능에 미치는 영향에 대한 연구는 미비하다. 따라서 본 연구에서는 3D TV 시청으로 유발되는 3D 시각피로가 자율신경계 기능에 미치는 영향과 이 영향이 교감 및 부교감 신경계와 심혈관계 반응에 미치는 영향을 확인하고자 한다. 피험자는 20 대 남녀 대학생 15 명(남 6 명, 여 9 명, 평균나이 22.53 세 ${\pm}$ 2.55 세)을 대상으로 하였다. 피험자는 편안한 의자에 앉아 3D TV를 1시간 시청하였다. 3D TV 시청 전과 후의 1분간 맥파(PPG, Photo-PlethysmoGram)를 측정하였고 주관설문을 실시하였다. 측정된 신호에서 SDNN (standard deviation of RR intervals), RMS-SD(root mean square successive difference), HF/LF ratio, Ln(LF), Ln(HF)를 추출하여 교감 및 부교감 신경계, 그리고 심혈관계 반응을 확인 하였다. 연구 결과 HF/LF ratio, Ln(LF), Ln(HF)는 시청 후에 유의하게 감소하였고, SDNN, RMS-SD는 통계적 유의차를 확인할 수 없었다. 이 결과는 3D 시각피로가 자율신경계 기능에 영향을 미치고 이로 인해 교감신경계가 항진되는 반응이 나타나며, 심박 변화율이 감소하는 결과를 초래할 가능성을 확인 하였다.

  • PDF

라이다 관측자료를 이용한 미세먼지 농도 산정 (Estimation of Particle Mass Concentration from Lidar Measurement)

  • 김만해;여희동;;임한철;이철규;허복행;유영석;손병주;윤순창;김상우
    • 대기
    • /
    • 제25권1호
    • /
    • pp.169-177
    • /
    • 2015
  • Vertical distribution of particle mass concentrations was estimated from 8-year elastic-backscatter lidar and sky radiometer data, and from ground-level PM10 concentrations measured in Seoul. Lidar ratio and mass extinction efficiency were determined from aerosol optical depth (AOD) and ground-level PM10 concentrations, which were used as constraints to estimate particle mass concentration. The mean lidar ratio (with standard deviation) and mass extinction efficiency for the entire 8-year study period were $60.44{\pm}23.17$ sr and $3.69{\pm}3.00m^2g^{-1}$, respectively. The lidar ratio did not vary significantly with the ${\AA}ngstr{\ddot{o}}m$ exponent (less than ${\pm}10%$); however, the mass extinction efficiency decreases to $1.82{\pm}1.67m^2g^{-1}$ (51% less than the mean value) when the ${\AA}ngstr{\ddot{o}}m$ exponent is less than 0.5. This result implies that the particle mass concentration from lidar measurements can be underestimated for dust events. Seasonal variation of the particle mass concentration estimated from lidar measurements for the boundary layer, was quite different from ground-level PM10 measurements. This can be attributable to an inhomogeneous vertical distribution of aerosol in the boundary layer.

다이오드 레이저 흡수분광법을 이용한 산소 동위원소의 성분비 측정 (Measurement of oxygen isotope ratio using tunable diode laser absorption spectroscopy)

  • 박상언;정도영;김재우;고광훈;임권;정의창;김철중
    • 한국광학회지
    • /
    • 제15권1호
    • /
    • pp.1-5
    • /
    • 2004
  • 분리막을 이용한 산소-18 분리실험에서 분리된 시료의 동위원소 성분비 분석을 위해 다이오드 레이저 흡수분광장치를 구성하였다. 흡수신호의 신호 대 잡음비를 높이기 위해 lock-in증폭기를 사용한 파장변조 분광법을 채택하였다. 레이저의 주파수 변조폭 최적화와 FFT 저역통과 필터링을 통해 다중반사흡수셀에서 발생하는 간섭무늬 잡음을 줄였다. 산소-18에 대한 흡수분광장치의 최대편차는 $\pm$4$\textperthousand$로 측정되었다.

충돌형 가스발생기 탈설계점 연소시험

  • 김승한;한영민;서성현;문일윤;이광진;김종규;설우석
    • 항공우주기술
    • /
    • 제3권2호
    • /
    • pp.81-90
    • /
    • 2004
  • 액체로켓엔진에서 터보펌프의 160kW급 터빈 구동용의, 액체산소와 케로신을 추진제로 사용하는 가스발생기의 탈설계점 연소성능시험 결과에 대해 논의하였다. 가스발생기의 탈설계점 연소시험에서 연소압력은 O/F비와 추진제 공급유량의 함수로 나타나는데, 출구 온도편차는 turbulence ring이 있는 경우 ±7.5K 이내로 매우 균일한 공간적 온도분포임을 확인하였다. 각각의 탈설계점 연소시험에서 가스발생기 출구 온도는 가스발생기로 공급되는 추진제의 O/F 비의 함수로 나타낼 수 있었다. 본 가스발생기의 탈설계점 연소시험 결과, 특히 가스발생기의 혼합비와 가스온도와의 관계는 향후 개발되어질 가스발생기 설계나 저혼합비 연소해석 코드를 작성 시 매우 유용하게 사용되어질 것이다.

  • PDF