• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.187-192
• /
• 2018

This thesis is about the study of inverter terminal boxes in a explosion proof type exhaust fan that can control wind volume and operating time. In Korea, there is no ventilator to adjust the amount of wind and operating time when working in poor conditions. The purpose of the project is to create a explosion terminal box that can control the operating time and wind speed of a suitable explosion ventilator in hazardous environments. The two explosion-proof switches allow the operation time to be driven 1 hour, 3 hours and continuous time, and the speed of the induction motor rotation was set in 3 stages at 2000 rpm, 2600 rpm and 3000 rpm to control the volume. The tested motor used a half-horsepower barrier three-phase induction motor and a full-bridge inverter to set the desired flow rate and operating time.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.973-979
• /
• 2024

In the framework of the Generation IV research and development project, in which the French Commission of Alternative and Atomic Energies (CEA) is involved, a main objective for the design of Sodium-cooled Fast Reactor (SFR) is to meet the safety goals for severe accidents. Among the severe ones, the Unprotected Transient OverPower (UTOP) accidents can lead very quickly to a global melting of the core. UTOP accidents can be considered either as slow during a Control Rod Withdrawal (CRW) or as fast. The paper focuses on fast UTOP accidents, which occur in a few milliseconds, and three different scenarios are considered: rupture of the core support plate, uncontrolled passage of a gas bubble inside the core and core mechanical distortion such as a core flowering/compaction during an earthquake. Several levels and rates of reactivity insertions are also considered and the thermal-mechanical behavior of an ASTRID fuel pin from the ASTRID CFV core is simulated with the GERMINAL code. Two types of fuel pins are simulated, inner and outer core pins, and three different burn-up are considered. Moreover, the feedback from the CABRI programs on these type of transients is used in order to evaluate the failure mechanism in terms of kinetics of energy injection and fuel melting. The CABRI experiments complete the analysis made with GERMINAL calculations and have shown that three dominant mechanisms can be considered as responsible for pin failure or onset of pin degradation during ULOF/UTOP accident: molten cavity pressure loading, fuel-cladding mechanical interaction (FCMI) and fuel break-up. The study is one of the first step in fast UTOP accidents modelling with GERMINAL and it has shown that the code can already succeed in modelling these type of scenarios up to the sodium boiling point. The modeling of the radial propagation of the melting front, validated by comparison with CABRI tests, is already very efficient.

• Journal of the Korean Institute of Rural Architecture
• /
• v.26 no.2
• /
• pp.37-46
• /
• 2024

The city is developing into a smart city. Smart villages and smart farms are developing in rural areas. Architectural technology needs synergy with smart cities, smart villages, and smart factories (intelligent factories) to help architectural experts understand smart farms and build facilities and equipment. Smart farms require design and construction technology with architectural structure and function. The purpose of this study was to investigate the current status and cases of smart farms in Korea and to investigate cases abroad. The conclusion is as follows. ① Smart farms are developing rapidly. The Korean government is expanding smart farms by utilizing ICT technology and infrastructure. ② 'Smart Farm Innovation Valley', which has been promoted since 2018, is a cutting-edge convergence cluster industrial complex that integrates production, education, and research functions such as start-ups and technological innovation. ③ In domestic cases, smart farms are operated in subway stations, buildings, supermarkets, and restaurants. ④ In the Japanese case, a dome-type smart farm was being operated. It utilized factory wastewater, waste heat, renewable energy, and used new materials. Otemachi Ranch raised livestock and provided a lounge on the 13th floor of the building. ⑤ In the cases of Korea and Japan, the smart farm technology is very similar. As stated earlier, since the food culture and agricultural technology of both countries are similar, we hope to promote the development of smart farms that can reduce concerns about future food by communicating and sharing mutual technologies.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.1
• /
• pp.185-202
• /
• 2012

This study analyzed the achievement characteristics of 21st Century Frontier R&D Program depending on the subject of study, type, period in order to provide necessary data required during planning and execution of the large scale R&D projects. 21st Century Frontier R&D Program is a representative national R&D project that has been supported for a decade. The research achievements were analyzed for researchers who participated in each four projects completed in 2010 and 2011 among 16 R&D projects of 21st Century Frontier R&D Program promoted by Ministry of Education, Science and Technology. The research is summarized as follows. First, the achievements varied depending on the main agent such as universities, R&D institutions, and industries. The achievement of universities includes significantly larger publications than those of R&D institutions and industries. Second, the rate of overseas patent application and registration were higher in industries significantly than those in other research agents. Third, the achievements differed depending on research type such as basic, applied, and development researches, and the development researches exhibited significantly higher achievements in domestic patent application and registration, overseas patent application, and technology transfer. Fourth, in terms of the research period, long-term projects show significantly larger number of domestic patent applications than those from short-term projects. Fifth, when achievements like the publication and overseas patent application were classified in such fields as bio, nano, and energy environment R&D, bio and nano fields showed higher achievement than the energy environment field. This research could empirically confirm that the achievement characteristics of large scale and long-term government support R&D projects vary for each research properties.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.2
• /
• pp.159-169
• /
• 2008

Recently, domestic construction projects Have become more high-rised, bigger, sophisticated, so necessity of logistics and progress management through application of various management theories has also been increased and development of IT technologies like RFID can help to improve management method, although the existing logistics and progress management studies are applied only to single progress or important material. It is a basic research for integrated framework for logistics and progress management. An analysis on the characteristics of RFID tech was performed for major materials or components of each work item in office building projects. This paper will make foundation of integrated framework for logistics and progress management in construction project, utilizing RFID technology by analysing materials type like materials which can be chased and measured, materials which can be chased and measured by certain methodologies, materials which can be chased and measured by future technologies, materials which are difficult to be chased and measured. So we can effectively control logistics and progress management, appling the optimum RFID technology to each construction project, and we need to study out solution in order to overcome RFID technology limitation through development of specification counterproposal about delicate materials of the RFID technology application.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.225-234
• /
• 2014

Because of their nature as public facilities, demands that former military facilities be utilized for the public welfare are increasing, thereby leading to an increase in cases in which these military facilities are reestablished as parks. Cases in which former military bases were reestablished as public parks were analyzed; as a result, several implications were derived. First, the objectives of public park projects should be examined from the perspective of the concept of urban regeneration and regional revitalization. Moreover, it is necessary that profits are yielded and that regional identity and history are reproduced through reusing existing facilities as much as possible rather than entirely remodeling former military sites. As parks become larger in size, bases should be reorganized into complexes rather than single facilities or programs. It is also necessary that parks be established in stages considering the enormous expenses required for building public parks. Consequently, because the special characteristics of military facilities can lead to insufficient on-site investigation in the process of establishing parks, thereby incurring a vast amount of costs for design adjustment and contamination disposal, this should be considered in advance. A method of delegating the development rights to partial sites to private businesses and supplementing the costs of park establishment and maintenance with development benefits should be examined. In addition, given that there are various interests and stakes in former military bases, a method of operating a public-private cooperative decision-making organization during project execution should be considered. Finally, policies related to urban parks need to be improved in order to raise funds, expand profitable businesses, facilitate social services and sponsorship, and encourage the participation of trusts and non-profit organizations in park operation and management.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.1
• /
• pp.57-67
• /
• 2021

The geology of the Iskaycruz project are mainly composed of sedimentary rocks within Cretaceous basin. The basal part is composed up of dark-gray shale, gray sandstone, and clastic rock of Oyon formation interbedded with coal measures. In the folded zone in the eastern part of the survey area, there is Chimu formation that has medium-grained massive and white quarztite. In terms of geological structure, the Iskaykruz region is located in the folded and overthrust zones of the central part of the Occidental Mountains. Ore body was formed by hydrothermal replacement process and consists of zinc, lead, silver, and copper. Stratabound-type deposits are hosted in limestone of Santa formation. It extends 12 kilometers discontinuously from northern Canaypata to southern Antapampa. Irregular iron oxide and sulfide minerals hosted in Santa and Parihuanca formations are observed. The mineralization observed on the surface consist of primary sulfides consisting of sphalerite with galena and chalcopyrite, and iron and manganese oxide produced from oxidation of primary sulfides. Skarn minerals are accompanied by tremolite, garnet, epidote and quartz.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.105-113
• /
• 2021

Due to the recent coronavirus outbreak, many universities in Korea have started to implement remote education. Accordingly, the Ministry of Education has stated its plans to continuously encourage and maintain remote learning as the future innovation model for education and suggested the need for a diverse range of remote learning models. However, studies on the development of practical learning models have not been carried out actively until now. Particularly, there are not many case studies in the field of design, especially regarding mobile website development. As means to improve the newly designed practice environment, this study therefore proposes the "modoo" project that offers domain creation and online marketing services. As a result of this study, the researcher suggests the use of a mixed(blending) teaching method and realized that the effectiveness of education multiplies when project-based learning and flipped learning is combined appropriately. The research methodology was divided into two big sections, education content and operations, and the effect was evaluated using the course evaluations. The study results confirmed that the applicability will increase given that learning satisfaction levels increased by more than 5% compared to face-to-face learning.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.67-74
• /
• 2021

Domestically, technical condition evaluation for breakwaters has been conducted through safety checks and safety diagnosis. If necessary, maintenance for the facility is conducted. However, in recent years, the need for infrastructure management has been increasing from a life-cycle-cost perspective. For these reasons, the "Sustainable Infrastructure Management Basic Act" was enacted. Previously, only the technical part of the breakwaters was evaluated. However, based on the act, comprehensive management of breakwaters will be possible through performance improvement by adding economic and political evaluations. In this study, evaluation factors and evaluation methods were developed for a breakwater rehabilitation project. The purpose of this study is to present a development direction, items, and methods for the evaluation of breakwater performance improvement to be applied in future practice. This study reviews the concept of maintenance and performance improvement, the literature related to performance improvement, and the project type for the common standard of performance improvement. Evaluation items and evaluation methods for breakwater rehabilitation are suggested to be reviewed by experts. The methodology suggested in this study could be used for preventive maintenance and to reduce accidents.

• Communications of Mathematical Education
• /
• v.28 no.3
• /
• pp.395-422
• /
• 2014

In this paper, we obtain the step inteaching high school leve-based class utilizing cooperative learning lessons using level-type tutoring to improve academic achievement and mathematics attitudes. The details are as follows. First, we develop the teaching and learning model for the level-type instructional development and for the application to project work. Second, we seek to height academic achievement by applying the level-type work sheets in conjunction with cooperative learning. For this problem, we will focus on the following issues. First, how will you using level-type tutoring level TAI cooperative learning in order to improve academic achievement and develop the learning ability in mathematics? Second, how can you step utilizing TAI instructional level of cooperative learning in mathematics classes to improve mathematics learning attitudes? Third, how will you some reaction step work sheets utilizing level TAI cooperative learning of students for mathematics. Results of this study are as follows. First, in the experimental group compared to the comparison group was improved academic achievement. Second, in the experimental group compared to the comparison group learning attitudes could help. Third, the level of cooperative learning instructional model utilizing the TAI in the experimental group compared to the comparison group represents a significant response was seen.