• Journal of Korea Technology Innovation Society
• /
• v.20 no.2
• /
• pp.458-486
• /
• 2017

This article suggests Living Lab approach as a technology commercialization model of public research and development (R&D) projects. Living Lab is a model for end-users, private companies, research institutes, and public organizations to develop technology in a living space which works as a laboratory. Unlike the dominant technology commercialization model which focuses on private enterprises, a new living lab model discusses end-user centered commercialization. Based on general living lab model, three types of technology commercialization model are suggested. The 'Demand exploring type living lab' and the 'Problem solving type living lab' are project-based living lab. The other type of living lab is 'Living lab platform'. The projectbased living lab can be utilized as modules when promoting R&D projects. On the other hand, the living lab platform is infrastructure to provide living labs services to companies, public institutes and municipalities.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.815-826
• /
• 2009

The paper presents a case study addressing the design and construction aspects for DCM(Deep Cement Mixing) method employed as the foundation of a caisson type breakwater with heavy weight(10,700 ton/EA) and a high design wave height($H_{1/3}$=8.7m). The DCM was designed for the project(Ulsan New Port North Breakwater Phase 1) by optimizing the pattern of DCM columns with a combination of short and long columns (i.e., block type(upper 3m)+wall type(lower)) and considering overlapped section between columns as a critical section against shear force where the coefficient of effective width of treated column($\alpha$) was estimated with caution. It was shown that the value can be 0.9 under the condition with the overlapped width of 30cm. In addition to that, a field trial test was performed after improving conventional DCM equipment (e.g., mixing blades, cement paste supplying pipes, multi auger motor, etc.) to establish a standardized DCM construction cycle (withdrawal rate of mixing blades) which can provide the prescribed strength. The result of the field strength test for cored DCM specimens shows that the averaged strength is larger than the target strength and the distribution of the strength(with a defect rate of 7%) also satisfies with the quality control normal distribution curve which allows defect rate of 15.9%.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.2 s.18
• /
• pp.64-71
• /
• 2004

A daily report is one of the critical documents in construction projects, since it helps them keep track of various as-built information. Despite the important role in progress management, the daily reporting process is time-consuming, and the representation of task information on daily reports are not effective enough to accumulate daily as-built information for further use in project management. Task information is composed of a specific work type and a location where the task is performed, which means that the same type of work is repeated over the locations. However, in many cases the task locations are described differently depending on a reporter's preference or experience. Without representing task location information effectively, it is difficult to accumulate and to reuse as-built information. The objective of this research is to build a framework for generating task information which can be efficiently accumulated and reused for progress management. To do so, this research built a task information model with focusing on the representation of task location associated with a work type, and developed an information system that supports automated and interactive generation of task information.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.217-225
• /
• 2019

National research and development(R&D) information is information generated in the process of performing R&D based on programs and projects issued by national government departments, and includes information from various research fields as ordered by various departments. Therefore, for efficient R&D information retrieval, it is necessary to build a national R&D terminology dictionary that can reflect the characteristics of such national R&D information. In this study, we propose a method for constructing a national R&D terminology dictionary by applying the classification of science and technology standards used to specify the research field in national R&D information. We will discuss the structural characteristics of national R&D project information and the usefulness of the project keyword, and explain the status of national R&D information by the National Standard Science and Technology Classification(NSSTC) Codes and the characteristics of the national R&D terminologies. Based on this, a method for building a national R&D terminology dictionary is defined in terms of the type and structure of the terminology dictionary, preliminary construction procedures, and refining rules. The national R&D terminology dictionary built on the basis of this study can be used in various ways such as expansion of search terms using Korean-English equivalent words and synonyms when searching national R&D information, clarifying the scope of search using NSSTC, and providing user convenience functions using term explanation information.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.112-124
• /
• 2021

This study was conducted to examine and analyze local governments, park status, project characteristics, and the implementation in detail for private park special projects across the country as a means of responding to the sunsetting of urban parks. As a result of the analysis, first, the private park special project, was found to be mainly implemented in cities with a population of more than 100,000, so there was a limit to the application on military installations or in local small cities. Therefore, rather than applying the special system collectively, it was judged that institutional flexibility, considering the characteristics and size of local government, was needed. Second, the current special projects by the park creation donation collection method shows monotonous development centered on apartment houses, so it is necessary to diversify the development by introducing a park preservation method that purchases and donates park sites. Third, it was found that the area standard needs to be eased to less than 50,000m² to include parks with high utilization and good accessibility in urban areas of large cities, as the type and area of parks are limited. Fourth, most special projects are mountain parks, which are feared to damage the natural terrain and skyline, so separate ordinances should be established and applied, and development approaches should be made to allow nature and parks to coexist with the setting of detailed building guidelines for each type of facility. The guidelines should include, first, after the nationwide private park special projects are completed, standards for appropriate returns for similar projects should be established, institutional standards such as the recovery of excess profits should be established, and environmental reviews should be conducted. Second, it was found that local governments should institutionalize the composition of private consultations to promote the efficient management of projects through a cooperative system, and third, a roadmap for maintenance after the donation of special parks should be established.

• Korean Journal of Pharmacognosy
• /
• v.47 no.4
• /
• pp.333-342
• /
• 2016

In our study, osteoporosis was induced by ovariectomized in female rats, and the prevention and treatment efficacy of the climacteric disease the postmenopausal type I pattern was examined by using the experimental substance Cassia tora (CT) ethanol extracts. Female rats were either sham-operated (sham; n=5) or surgically ovariectomized (OVX; five animals per group) and then administered to OVX control, raloxifene hydrochloride (RLX) 1 mg/kg/day, or CT (20 and 200 mg/kg/day) for 12 weeks. Serum osteocalcin and creatinine concentration were significantly lower in the CT 200 mg/kg/day group compared with the OVX control group. Serum progesterone concentration was significantly higher in the CT 200 mg/kg/day group compared with the OVX control group. Reduction grade of the trabecular bone decreased in the RLX 1 and CT 200 mg/kg/day group compared with that of the OVX control group. In conclusion, CT 200 mg/kg/day may have inhibitory effects on osteoporosis in OVX rats.

• Journal of Environmental Impact Assessment
• /
• v.33 no.3
• /
• pp.131-141
• /
• 2024

The environmental impact assessment have been played important role for sustainable development of the country. Meantime, various studies have been conducted for scientific and effective environmental impact assessment. Howeverthe quantitative data such as regional distribution status and development characteristics according to the type of development project, environmental changes due to development projects, and spatial-temporal changes are insufficient, currently. In this study, we investigated the eco-friendliness of major development projects (industrial complex, urban development, tourist complexes, and waste disposal equipments) by integrating the EA-INDEX of each development projects which were reported by prior researches. As a result, we found that the eco-friendliness of development projects tended to gradually increase overtime due to the increase in eco-friendliness in the protection of living environment sector. The protection of living environment sector was a major factor in the the eco-friendliness of industrial complexes and urban development projects. In the case ofroad construction, landfill and tourist complex development projects, the natural environment conservation sector was a major factor in the eco-friendliness of the project. As a result of analyzing the eco-friendliness of development projects by local government, the eco-friendliness of development projects promoted and implemented in Ulsan, Jeonnam, and Gwangju was higher compared to other regions, and it was relatively low in Daejeon, Gyeongnam, and Daegu. This study is considered to be significant in that it conducted a quantitative analysis of the eco-friendliness of development projects carried out over a relatively long period of time throughout South Korea by dividing them by year and local government.

• Journal of Distribution Science
• /
• v.14 no.10
• /
• pp.153-164
• /
• 2016

Purpose - In general, large companies have larger organizations, funds, and systems to provide more effective and efficient services in the market. However, development needs to support the livelihood of ordinary citizens who work for small businesses as well. This research suggests that a new distribution channel, called a "foothold style Kosa mart," that cooperates jointly with a distribution center and a large discount mart can provide direct solutions to small and mid-size distributors. This new distribution channel can achieve a limited type of "Nadle shop (small supermarket) foster project" related to building a joint distribution center and improvement in wholesale supply. Research design, data, and methodology - Data about the Korea distribution situation, the Nadle stores, and the logistics centers were collected from literature, Statistics Korea, journals, and reports. Specifically, we investigated information about Kosa Mart and Nadle stores. We focused on the redesign of the distribution center for the Nadle store. Results - The Kosa Mart distribution center now includes 18 warehouses, and has been handling 2000-3000 items. Most of the warehouses have been simply designed and items loaded and stored without refrigeration; thus, it is possible to store only products of certain manufactured goods. The current logistics center has no wholesale function because it failed to resolve the joint purchasing and product supply issues of competitively priced products. Conclusions - This study aimed to identify ways to strengthen the competitiveness of small- and medium-sized retailers. A Kosa Mart redesign aims to unifying the logistics center, stores, and customers. First, the joint wholesale logistics system, equipped with an integrated ordering system, needs to process customer orders and store orders at the same time. Second, excellent small business product development has to connect with production. Third, the store composition needs to support a shipping hub. Fourth, the Mart differentiates itself from convenience store goods by supplying regional and specialized products to customers. Fifth, a service buying agent and direct transactions between producers and consumers need to be established, and exhibits and displays of goods need to be improved.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.439-450
• /
• 1997

Most of Korean feed mill has a pregrind system which was suitable for the processing of less number of ingredients and finished products, and good for the mash type feed product. But industries has been changed in production volume and cost, and also from mash to further processed products such as pelleted and extruded. Therefore, Korea feed industries now should change the process, especially the grinding system from the current pregrind to other grind system, but this change will cost a lot of investment and also loosing current grinding system, and should have production shut down during the construction period. To solve these problems, combined grinding system based on a new model mill has been developed. The combined grind system is combination of pregrind and postgrind system, which has the advantages of those two grind systems, and also which can allow to utilize existing pregrind system continuously without any production interruption due to new postgrind system construction. This newly developed model has been applied to the feed mill expansion project of `B`feed company in 1994, and it was very successful application and showed excellent results as we intended. The new model mill, combined grind system applied can save fixed asset investment because old pregrind system can be used as is, and also can reduce production cost and improve product quality. And the possibility of critical production shut down can be much lowered. Within this new grinding model development, multi-screen combination system has been developed for the better grinding texture quality and safer operation. This new model mill with combined grind system will be applied by most feed manufacturing plant and may enhance their production competitiveness, and the further study and development should be continued.

• Journal of the Economic Geographical Society of Korea
• /
• v.21 no.2
• /
• pp.192-211
• /
• 2018

With significant influences of old industrial complex in September 2009, Ministry of Land, Infrastructure and Transport chose the 4 districts for the first pilot project. In December 2014, the second pilot project districts were established. In addition, there were 10 districts in April 2016 and 5 districts in April 2016 as the third pilot project and 5 districts in March 2017 as the fourth pilot project. In order to promote smooth business operation of the recycling business, we introduced the effective area designation and special system as stipulated in Article 39.12-13 of the Industrial Location and Development Act revised in May 2015. The effective area, It is a method that can promote propagation and diffusion of the rehabilitation business through visualization by making effective the promotion of the rehabilitation business and by promoting the business in consideration of the geographical feature of the region and industry group, The setting of the unreasonable effective area is based on the criteria and classification of the plan and the objective promotion method according to the individual characteristics of the aged industrial park because the delay of the rehabilitation business and the possibility of the increase of many problems are presented Be sure to Data Envelopment Analysis (DEA) and the old industrial complex database were constructed and utilized to classify the types of recycling projects. Therefore, in this study, it is necessary to strengthen the competitiveness of aged industrial complex by examining the correlation between the diagnosis of 83 aged industrial complex sites and the rehabilitation projects supported by the Ministry of Land, and the types of business promotion for aged industrial parks. It can be used as a guideline for the feasibility of the project.