• 제목/요약/키워드: Development of evaluation scale

검색결과 981건 처리시간 0.028초

급가속시 차량의 흡기소음에 대한 음질지수 개발 (Development of a Sound Quality Index for the Evaluation of an Intake Noise of a Passenger Car)

  • 이종규;박영원;채장범
    • 한국소음진동공학회논문집
    • /
    • 제15권8호
    • /
    • pp.939-944
    • /
    • 2005
  • In this paper, a sound quality index for the evaluation of the vehicle intake noise was developed through a correlation analysis of the objective measurement and the subjective evaluation. First, intake orifice noise was measured at the wide-open throttle sweep condition. And then, the acoustic transfer function between intake orifice noise and interior noise was measured. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 special engineers. The correlation analysis between the psychoacoustic parameters derived from the measurement and the subjective evaluation was performed. The most critical factor was determined and the corresponding sound quality index for intake noise was obtained from the multiple factor regression analysis method. Finally, the effectiveness of the proposed index was validated.

차량의 흡기부밍소음 평가지수 개발 (Development of an Index for the Evaluation of Intake Booming Noise of a Passenger Car)

  • 박영원;채장범;장한기;이종규
    • 한국소음진동공학회논문집
    • /
    • 제14권9호
    • /
    • pp.884-890
    • /
    • 2004
  • In this paper, an index for the evaluation of vehicle intake booming noise is developed through a correlation analysis of objective measurement data and subjective evaluation data. First, intake orifice noise is measured at the wide-open test condition. And then, acoustic transfer function between intake orifice noise and interior noise at the steady state condition is estimated. Simultaneously, subjective evaluation was carried out with a ten-scale score by 8 engineers. Next, the correlation analysis between the psycho-acoustic parameters derived from the measured data and the subjective evaluation is performed. The most critical factor was determined and the corresponding index for the intake booming noise is obtained from the multiple factor regression method. At last, the effectiveness of the proposed index is validated.

한국판 버그 균형척도 평가도구의 라쉬분석 (Application of Rasch Analysis to the Korean Berg Balance Scale)

  • 이정아;이충휘;박소연;황수진
    • 한국전문물리치료학회지
    • /
    • 제13권3호
    • /
    • pp.49-56
    • /
    • 2006
  • This study was designed to examine, using Rasch analysis, the rating scale performance of the Korean version of the Berg Balance Scale (BBS). The subjects were 95 elderly people at community dwelling. Subjects (19 men, 76 women) ranged in age from 65 to 91 years. Rasch analysis was then done by means of the Winsteps program to determine the validity and reliability of the Korean version of the BBS evaluation tools for elderly people. The results were as follows: Twenty-one elderly people were excluded for misfit persons. Three items were found to be misfits and the order of item difficulty of the remaining 11 items was arranged. Elderly people BBS ability is indicated by -.94~7.41 logit, and the transformation formula is score=(logit score+.94)/$(.94+7.41){\times}100$. This transformation formula can be applied to Korean elderly people for balance ability. In the order of difficulty of evaluation items, the most difficult item was "Standing on one foot" and the easiest item was "Standing to Sitting". In conclusion, the Korean version of BBS evaluation tool for the elderly people has been proved valid and will be useful in clinical practice and research in Korea.

  • PDF

영상처리를 이용한 안면신경마비 평가시스템 개발 (Development of Facial Nerve Palsy Grading System with Image Processing)

  • 장민;신상훈
    • 대한한의진단학회지
    • /
    • 제17권3호
    • /
    • pp.233-240
    • /
    • 2013
  • Objectives The objective and universal grading system for the facial nerve palsy is needed to the objectification of treatment in Oriental medicine. In this study, the facial nerve palsy grading was developed with combination of image processing technique and Nottingham scale. Methods The developed system is composed of measurement part, image processing part, facial nerve palsy evaluation part, and display part. With the video data recorded by webcam at measurement part, the positions of marker were measured at image processing part. In evaluation part, Nottingham scales were calculated in four different facial expressions with measured marker position. The video of facial movement, time history of marker position, and Nottingham scale were displayed in display part. Results & Conclusion The developed system was applied to a normal subject and a abnormal subject with facial nerve palsy. The left-right difference of Nottingham scores was large in the abnormal compared with the normal. In normal case, the change of the length between supraorbital point and infraorbital point was larger than that of the length between lateral canthus and angle of mouth. The abnormal case showed an opposite result. The developed system showed the possibilities of the objective and universal grading system for the facial nerve palsy.

요인분석을 활용한 서울시 자치구/행정동의 지역균형지수 개발 (Development of Regional Balanced Index for Administrative Districts and Dongs in Seoul using Factor Analysis)

  • 김동근;박귀원;하소미;김도현
    • 품질경영학회지
    • /
    • 제49권3호
    • /
    • pp.375-392
    • /
    • 2021
  • Purpose: Regional gaps and conflicts between regions due to Korea's economic development and industrialization have become important issues, and the issue of balanced regional development at regional level has been discussed as the size of the region has increased recently. Although evaluation of regional balance was attempted through various regional balanced development indexes, it is inappropriate as a standard for determining regional balance in Seoul. Therefore, this study aims to develop objective evaluation methodologies and evaluation indicators for balanced development of administrative districts in Seoul, not existing city and national units. Methods: We looked at existing regional balanced development indexes, and suggested a new regional balanced index reflecting regional development, backwardness, and spatial characteristics in Seoul using factor analysis. Results: As a result of factor analysis, the regional balanced development index for administrative districts and administrative dongs consists of two factors (regional revitalization, financial power) and three factors (commercial density, social security demand, regional retardness), respectively. Then the regional balanced development index scores for 116 administrative districts and 423 administrative dongs are calculated by multiplying each factor by a weight obtained through experts' survey. Conclusion: The proposed regional balanced development index can be used as an objective and quantitative basis for regional balanced development within a city. Further research may include continuously adding new indicators that reflect the direction and scale of development.

축소모형을 이용한 분할형 유리 투과체 창호시스템의 채광성능실험 (Scale Model Experiment on Daylighting of Differentiated Glazing System)

  • 정인영;김정태
    • KIEAE Journal
    • /
    • 제4권4호
    • /
    • pp.61-68
    • /
    • 2004
  • Daylight is a critical factor in architecture, as it helps enhance the working efficiency and pleasantness of the people working inside, in addition to reduce the power consumption in heating and cooling and make the interior space brighter. There are many kinds of glazing and daylighting systems. At present, research and efforts for their development are carried out, alongside quantitative evaluation. This study aims to present basic materials to be used to design proper glazing and daylighting systems in architecture based on a quantitative evaluation by scale models of existing office buildings. The result of the study can be summarized as follows. 1)As a result of the experiment, it appeared that the ratio of the interior illumination (i.e. at the working table, ceiling and wall) against the outdoor illumination increases at a constant rate, as the transmittance of the glazing goes up. 2) It was found that the SIR(Sunlight Illuminance Ratio) of a separated window system goes up by 20-50% at the rear part than in the case of an ordinary window system.

국방 CBD 산출물을 위한 정량적 품질 평가 방법 (A Quantitative Quality Evaluation Approach for the Artifacts of the Defense Component Based Development)

  • 이길섭;이현철;이승종
    • 정보처리학회논문지D
    • /
    • 제12D권7호
    • /
    • pp.993-1000
    • /
    • 2005
  • 최근에 ISO/IEC 9126과 ISO/IEC 14598에 기반한 소프트웨어 품질 평가는 다양한 분야에서 넓게 받아들여지고 있다. 그러나 소프트웨어 품질에 대한 이러한 표준들은 소프트웨어 제품에 대한 품질 모델과 품질 평가 프로세스의 실제적인 활용을 위한 지침을 제공하고 있지 않다. 그리고 대부분의 소프트웨어 사업에서 품질관리는 이러한 표준을 적용하기보다는 결함사항을 관리하는 방식으로 수행되고 있다. 그래서 본 논문에서는 국방 CBD 방법론의 산출물에 대한 정량적 품질 평가 방법을 제시한다. 특히, 본 논문에서 제시된 방법은 대부분의 표준 품질 평가 프로세스를 허용하면서 소프트웨어에 대한 이해관계자들에게 신중하게 작성된 설문서를 제시하여 얻어진 자료를 AHP 기법을 통하여 분석된 품질특성의 중요도를 이용하는 정량적 품질 모델을 적용한다. 또한, 소규모 소프트웨어 사업에서 얻어진 국방 CBD 방법론의 산출물에 대하여 품질평가 점검표를 적용하여 제안된 방법을 시험하였다. 결과적으로 제시된 방법은 고품질 소프트웨어를 획득하는 것이 가능함을 확인할 수 있었다.

TV 화질에 대한 감성평가척도 개발 (Development of Emotion Assessment Scale in Evaluation of Television Picture Quality)

  • 장은혜;최상섭;이경화;손진훈
    • 감성과학
    • /
    • 제12권1호
    • /
    • pp.121-128
    • /
    • 2009
  • 본 연구의 목적은 TV 화질에 대한 사용자들의 심리적 특성을 평가하기 위한 화질평가척도를 개발하고, TV 화질의 심리 특성과 물리적 특성의 관계를 확인하는 것이다. TV 화질과 관련된 형용사 152개 중 집단설문(남녀 대학생 80명)을 통하여 TV 화질을 잘 표현하는 형용사로 19개의 형용사를 선정하였다. 선정된 형용사는 다음과 같다; '깔끔하다-지저분하다', '깨끗하다-더럽다', '산뜻하다-침울하다', '편안하다-긴장된다', '매끄럽다-거칠다', '밝다-어둡다', '화려하다-수수하다', '변화스럽다-단조롭다', '자연스럽다', '감각적이다', '만족스럽다'. 126명의 남녀 대학생을 대상으로 이들 형용사의 유사성 평정을 실시하고, 유사성 점수에 대하여 요인분석(주성분분석, oblique 회전)을 실시한 결과, '깔끔함' 차원과 '화려함' 차원으로 분류되었다. 그리고 31명의 남녀 대학생을 대상으로 TV 화질에 대한 감성과 물리적 특성과의 관계를 확인하였다. 그 결과 TV 화질에 대한 감성 형용사들은 밝기, 명암, 색농도와 색상의 변화에는 민감하였으나, 선명도의 변화에는 민감하지 않은 것으로 나타났다.

  • PDF

미소가공을 위한 마이크로 밀링머신 개발 (The Development of Micro Milling Machine for Micro Machining)

  • 황준
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2005년도 춘계학술대회 논문집
    • /
    • pp.278-281
    • /
    • 2005
  • Today, manufacturing capability at the micro or nano scale production field is requested strongly in view of parts and product miniaturization. Miniaturized parts and products will introduce lots of benefits in terms of high precision functionality and low energy consumption. This paper presents the results of micro milling machine tool development for micro machining process. Finite element analysis has been performed to know the relationship between design dimensional variables and structural stiffness in terms of static, dynamic, thermal aspects. Performance evaluation through machining has been tested and discussed for achievable machining characteristics.

  • PDF

An Advanced User-Construction Requirement Within the EFD for the Development of Large-scale Information Systems

  • Park, Won-Seok;Park, Man-Gon
    • 한국멀티미디어학회논문지
    • /
    • 제6권4호
    • /
    • pp.723-735
    • /
    • 2003
  • This research focuses ell an approach for the building of a requirements model for the development of large-scale information systems. It will suggest a set of requirements engineering processes as a procedure of the implementation for building the requirements model. It will also emphasise the evaluation requirements model aimed to refine and complete the requirements model by the different user groups as a cross reference. This paper provides an advanced user-construction requirements within the Event Flow Diagram as a set of requirements engineering process.

  • PDF