• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10937-10941
• /
• 2015

Pathogenesis of lung cancer is a complicated biological process including multiple genetic and epigenetic changes. Since cigarette smoking is confirmed as the most main risk factor of non-small cell lung cancer (NSCLC), the aim of this study was to determine whether tobacco exposure plays a role in gene methylation. Methylation of the RAR-${\beta}$ gene were detected using methylation-specific polymerase chain reaction in DNA from 167 newly diagnosed cases with NSCLC and corresponding 105 controls. A significant statistical association was found in the detection rate of the promoter methylation of RAR-${\beta}$ gene between NSCLC and controls ($x^2$=166.01; p<0.01), and hypermethylation of the RAR-${\beta}$ gene was significantly associated with smoking status (p=0.038, p<0.05). No relationship was found between RAR-${\beta}$ gene methylation and pathologic staging including clinical stage, cell type, gender and drinking (p>0.05), and the methylation of RAR-${\beta}$ gene rate of NSCLC was slightly higher in stages III+IV (80.0%) than in I+II (70.8%). Similar results were obtained for methylation of the RAR-${\beta}$ gene between squamous cell carcinoma (77.9%) and other cell type lung cancer (73.9%). These results showed that the frequency of methylation increased gradually with the development of clinical stage in smoking-associated lung cancer patients, and tobacco smoke may be play a potential role in RAR-${\beta}$ gene methylation in the early pathogenesis and process in lung cancer, particularly squamous cell carcinoma. Aberrant promoter methylation is considered to be a promising marker of previous carcinogen exposure and cancer risk.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.5
• /
• pp.446-456
• /
• 2005

Nerve growth factor(NGF) has a critical role in peripheral nerve regeneration. The aim of this study is to construct a well-functioning hNGF-$\beta$ recombinat adenovirus for the ultimate development of improved method to promote peripheral nerve regeneration with adenovirus mediated hNGF-$\beta$ gene transfection into Schwann cells. First PCR associated cloning of GFP-tagged hNGF-$\beta$ which was ligated into E1/E3 deleted adenoviral vector was performed and tranfected into E. coli to construct hNGF-$\beta$ recombinant adenovirus. After production of recombinat adenovirus in a large scale, its transfection efficiency, expression, and function were evaluated using cell lines or primarily cultured cells of HEK293 cells, Schwann cells, fibroblast(NIH3T3) and myocyte(CRH cells). GFP expression was observed in 90% of infected cells compared to uninfected cells. Total mRNA isolated from hNGF-$\beta$ recombinat adenoviru infected cells showed strong RT-PCR band, however, LacZ recombinant adenovirus infected or uninfected cells did not. NGF quantification by ELISA showed a maximal release of 18.865 +/- 0.31ng/mL at 4th day. PC-12 cells exposed to media with hNGF-$\beta$ recombinant adenovirus infected Schwann cell demonstrated higher levels of differentiation compared with controls. We generated hNGF-$\beta$ recombinant adenovirus and induced over expression of NGF successfully in nonneuronal and neuronal cells. Following these result, it is expected to develop an improved treatment strategy peripheral nerve regeneration using the hNGF-$\beta$ gene transfected cells.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.817-821
• /
• 2010

As the environment of Logistics is changing rapidly, the environment of port is also changing. Accordingly, rapid change within port environment appears as the increase of the volume for world wide cargo, liner ship owners' strategy shift, globalization of terminals, heavy competitions to become a hub of Logistics, development of ship engineering. Therefore, the people who are responsible for the operations and managements of ports foresee such changes and accordingly react to ensure competitiveness. As the competition among ports generally goes international, a port needs to be sure that they become superior to any other port regardless of whether it's outside their country or not. Especially Korea is located in the most heavily competitive area which is Far-East. So if we fail to get competitiveness against the other ports, it goes without saying that our ports will be defeated by them. In brief, this paper will discuss the history of study regarding the factors by which a port is selected and also suggest some of elements which can be applied to small ports in the future of it.

• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.25-33
• /
• 1998

Root zone temperature have influenced on protected cultivation in winter season. Especially root zone temperature is acted on limiting factor in crop cultivation. This study was conducted to obtain optimum temperature of root zone in Protected cultivation Root zone was warmed by heated water($28^{\circ}C$) flowing through the PPC pipe(${\phi}15$) buried depth 40 cm. And the flowing water was heated by solar system. Minimum air temperature during night time was set at $14^{\circ}C$ and maximum air temperature during day time was set at $28~30^{\circ}C$ the growing period of cucumber was from Nov. 6, 1996 to Jan. 30, 1997. The results are summarized as follows. 1. Average soil temperature at 15~20 cm depth was $22^{\circ}C$ at warming plots, $17~18^{\circ}C$ at non-warming plots 2. Early growth in leaf length, stem diameter, number of leaves and leaf area for 30 days after planting were accelerated by root zone warming. Especially, the grawing rate of soil warming plots was higher 27% in leaf length, 51% in leaf number, 150% in leaf area than non-warming Plots. Above-ground and underground part of warming plots was higher 117%, 56% than non-warming plots. 3. In total yield analysis, number of fruits were 614 in soil warming and 313 in non-warming plots. In the result, total yield of soil warming plots was increased with 196% than non-warming plots. 3. In total yield analysis. number of fruits were 614 in soil warming and 313 in non-warming plots. In the result. total yield of soil warming plots was increased with 196% than non-warming plots.

• BMB Reports
• /
• v.39 no.6
• /
• pp.696-702
• /
• 2006

Recently three proteins, playing central roles in the bidirectional transport of urate in renal proximal tubules, were identified: two members of the organic anion transporter (OAT) family, OAT1 and OAT3, and a protein that designated renal urate-anion exchanger (URAT1). Antibodies against these transporters are very important for investigating their expressions and functions. With the cytokine gene as a molecular adjuvant, genetic immunization-based antibody production offers several advantages including high specificity and high recognition to the native protein compared with current methods. We fused high antigenicity fragments of the three transporters to the plasmids pBQAP-TT containing T-cell epitopes and flanking regions from tetanus toxin, respectively. Gene gun immunization with these recombinant plasmids and two other adjuvant plasmids, which express granulocyte/macrophage colony-stimulating factor and FMS-like tyrosine kinase 3 ligand, induced high level immunoglobulin G antibodies, respectively. The native corresponding proteins of URAT1, OAT1 and OAT3, in human kidney can be recognized by their specific antibodies, respectively, with Western blot analysis and immunohistochemistry. Besides, URAT1 expression in Xenopus oocytes can also be recognized by its corresponding antibody with immuno-fluorescence. The successful production of the antibodies has provided an important tool for the study of UA transporters.

• Progress in Medical Physics
• /
• v.13 no.2
• /
• pp.85-89
• /
• 2002

We authors developed a new small-size birdcage RF coil for animal MR images. And we compared signal-to-noise ratio (SNR) of the new small coil with a conventional knee coil. The dimension of the low-pass type birdcage coil with 12 elements at 37 MRI system are 13 cm outer diameter, 12 cm inner diameter and 20 cm length. For each element, the width of copper tape is 0.05 mm, thickness is 8 mm and length is 20 cm. The small birdcage coil with 12 elements exhibited 7 resonance modes. The isolation of the quadrature channel could be achieved more than 20 ㏈. The coil quality factor (Q value) was 98.6. The SNR of the animal coil was 243.2 on the average and was about twice as high as the conventional knee coil. The present study successfully demonstrated that the small birdcage coil could provide high quality animal MR images with the improved SNR. Therefore, it is expected that the small birdcage coil could be used in the clinical diagnosis and research studies for veterinary medicine in the near future.

• Progress in Medical Physics
• /
• v.28 no.1
• /
• pp.1-10
• /
• 2017

The difference between three-dimensional (3D) and four-dimensional (4D) dose could be affected by factors such as tumor size and motion. To quantitatively analyze the effects of these factors, a phantom that can independently control each factor is required. The purpose of this study is to develop a deformable lung phantom with the above attributes and evaluate the characteristics. A phantom was designed to simulate diaphragm motion with amplitude in the range 1~7 cm and period up to ${\geq}2s$ of regular breathing. To simulate different tumors sizes, custom molds were created using a 3D printer and filled with liquid silicone. The accuracy of the phantom diaphragm motion was assessed by comparing measured motion with predicted motion. Because the phantom diaphragm motion is not identical to the tumor motion, the correlation between the diaphragm and tumor motions was calculated by a curve fitting method to emulate user-intended tumor motion. Tumors of different sizes were located at same position, and tumor set-up positions were evaluated. The accuracy of phantom diaphragm motion was better than 1 mm. The diaphragm-tumor correlation showed that the tumor motion in the superior-inferior direction increased with increasing diaphragm motion. The tumor motion was larger in the $10cm^3$ tumor than in the $90cm^3$ tumor. The range of difference between the tumor set-up positions was 0 to 0.45 cm. This phantom showed independently adjusting factors such as tumor size and motion to facilitate quantitative analysis of the dosimetric impact of respiratory motion according to these factors.

• Journal of Korea Water Resources Association
• /
• v.48 no.11
• /
• pp.937-944
• /
• 2015

This study proposed a novel technique, namely the Radar Polygon Method (RPM), for areal rainfall estimation based on radar precipitation data. The RPM algorithm has the following steps: 1. Determine a map of the similar rainfall occurrence of which each grid cell contains the binary information on whether the grid cell rainfall is similar to that of the observation gage; 2. Determine the similar rainfall probability map for each gage of which each grid cell contains the probability of having the rainfall similar to that of the observation gage; 3. Determine the governing territory of each gage by comparing the probability maps of the gages. RPM method was applied to the Anseong stream basin. Radar Polygons and Thiessen Polygons of the study area were similar to each other with the difference between the two being greater for the rain gage highly influenced by the orography. However, the weight factor between the two were similar with each other. The significance of this study is to pioneer a new application field of radar rainfall data that has been limited due to short observation period and low accuracy.

• Korean Journal of Materials Research
• /
• v.30 no.10
• /
• pp.566-572
• /
• 2020

In the recent years, thin film solar cells (TFSCs) have emerged as a viable replacement for crystalline silicon solar cells and offer a variety of choices, particularly in terms of synthesis processes and substrates (rigid or flexible, metal or insulator). Among the thin-film absorber materials, SnS has great potential for the manufacturing of low-cost TFSCs due to its suitable optical and electrical properties, non-toxic nature, and earth abundancy. However, the efficiency of SnS-based solar cells is found to be in the range of 1 ~ 4 % and remains far below those of CdTe-, CIGS-, and CZTSSe-based TFSCs. Aside from the improvement in the physical properties of absorber layer, enormous efforts have been focused on the development of suitable buffer layer for SnS-based solar cells. Herein, we investigate the device performance of SnS-based TFSCs by introducing double buffer layers, in which CdS is applied as first buffer layer and ZnMgO films is employed as second buffer layer. The effect of the composition ratio (Mg/(Mg+Zn)) of RF sputtered ZnMgO films on the device performance is studied. The structural and optical properties of ZnMgO films with various Mg/(Mg+Zn) ratios are also analyzed systemically. The fabricated SnS-based TFSCs with device structure of SLG/Mo/SnS/CdS/ZnMgO/AZO/Al exhibit a highest cell efficiency of 1.84 % along with open-circuit voltage of 0.302 V, short-circuit current density of 13.55 mA cm^-2, and fill factor of 0.45 with an optimum Mg/(Mg + Zn) ratio of 0.02.

• Informatization Policy
• /
• v.23 no.2
• /
• pp.54-72
• /
• 2016

This article analyzes the latest cases of Digital Social Innovation such as crowdsourcing and online petitions for public trouble-shooting in oder to demonstrate that public engagement of the citizens on decision making can enhance the quality of democracy. Digital Social Innovation contributes to citizen's participation on decision making and policy implementation with taking advantage of digital technologies of crowdsourcing and online petitions. Active civic engagement for decision making literally helps to improve and democratize government policy. These series of processes not only improve quality and efficiency of policy governance by building up transparency and effectiveness of policy itself but also enhance the throughput legitimacy. With this article, I quote and analyze various practices of Digital Social Innovation which we had substantiated to demonstrate the effectiveness of civic engagement for decision making to improve and enhance democracy. The hypothesis that the Digital Social Innovation attempted in various ways is a principal factor of democratization could be verified. Moreover, the practices of Digital Social Innovation helps the civic participation in policy making in modern society. Finally, this article suggests an implication of Digital Social Innovation as part of efforts to ensure the involvement of throughput legitimacy for the development of democracy.