• 자원환경지질
• /
• 제51권1호
• /
• pp.39-48
• /
• 2018

밀도가 다른 4개의 실험공에서 2007년부터 2011년까지 수행한 이격보정 실험 자료를 이용하여 가장 효과적인 보정 차트를 알기 위해 연구를 수행하였다. 먼저 선원의 불규칙적인 붕괴특성을 파악하고 비이상적인 감마반응을 잘라내는 방법으로 이격보정 자료의 효과를 높였다. 수정된 이격보정 자료로부터 검출기 조합별, 시추공 밀도별, 이격보정 기법별 효과를 분석하였다. 그 결과 통상적으로 사용해 온 LSD-SSD 조합보다 LSD-MSD 조합이 이격보정에 더 적합하며, 지하수위면 하부에 위치한 토양층이나 풍화대의 이격보정에서는 큰 오차를 피하면서 이격보정이 가능한 것으로 나타났다. 일반 이격보정에 비해 밀도형 이격보정에서 오차의 규모가 전반적으로 높게 나타났으나 지하수면 하부에 있는 풍화대나 토양층을 대상으로 하는 이격보정에서는 충분히 밀도형 이격보정이 효과적인 것으로 나타났다.

• 한국재료학회지
• /
• 제19권3호
• /
• pp.151-155
• /
• 2009

Micro-scale copper bumps for build-up PCB were electroplated using a pulse-reverse method. The effects of the current density, pulse-reverse ratio and brightener concentration of the electroplating process were investigated and optimized for suitable performance. The electroplated micro-bumps were characterized using various analytical tools, including an optical microscope, a scanning electron microscope and an atomic force microscope. Surface analysis results showed that the electroplating uniformity was viable in a current density range of 1.4-3.0 A/$dm^2$ at a pulse-reverse ratio of 1. To investigate the brightener concentration on the electroplating properties, the current density value was fixed at 3.0 A/$dm^2$ as a dense microstructure was achieved at this current density. The brightener concentration was varied from 0.05 to 0.3 ml/L to study the effect of the concentration. The optimum concentration for micro-bump electroplating was found to be 0.05 ml/L based on the examination of the electroplating properties of the bump shape, roughness and grain size.

• 한국약용작물학회지
• /
• 제28권2호
• /
• pp.136-141
• /
• 2020

Background: The leaves of the goji berry (Lycium chinense Mill.) are used as raw materials in processing and by replace fruits to some extent. The reason is that the leaves are cheaper, however, betaine content is higher than in the fruits. These experiments were conducted to determine the planting density and cutting height for producing a large number of leaves. Methods and Results: The cultivar 'Myeongan' with many branches was used. When the shoot height reached 50 cm - 70 cm, harvesting was possible four times a year. The time to next harvest was approximately 38 days after regeneration of new shoots. Leaf quantity was in the order of 1st > 2nd > 4th > 3rd harvest. Insect damage occurred during the third harvest in late July and early August, therefore, eco-friendly control was necessary. The total yield was higher at the planting density 60 cm × 30 cm than that of 60 cm × 20 cm or 60 cm × 40 cm. The yield at cutting for shoot height of 60 cm was increased by 6.3 percent compared to that of 50 cm, At the cutting height of 70 cm, harvest was difficult owing to hardening of stems and thorns. Betaine content, an indicator component of goji berry, was not significantly different according to planting densities and cutting height. Conclusions: The ideal cutting period to produce leaves of goji berry for processing is when the shoots grow to approximately 60 cm, and the leaves can be harvested 4 times a year. The dried-leaf yield was highest at the planting density of 60 cm × 30 cm.

• 생명과학회지
• /
• 제22권12호
• /
• pp.1712-1717
• /
• 2012

Low density lipoprotein (LDL)의 산화는 동맥경화의 유발과 진행에 중요한 역할을 하는 것으로 알려져 있다. 본 연구는 숙성 마늘 유래 유황화합물인 S-allylmercaptocysteine의 항산화 효과를 실험하였다. S-allylmercaptocysteine의 항산화 효과는 $Cu^{2+}$ 유도 LDL에 대하여 thiobarturic acid substance (TBARS)와 전기영동 이동거리, 공액 이중결합으로 측정하였다. 사람 LDL을 $Cu^{2+}$ 유도로 산화시킬 때 S-allylmercaptocysteine은 용량 의존형으로 나타났으며, 농도가 $20{\mu}g/ml$ 일 때 거의 완전한 억제 효과를 나타내었다. S-allylmercaptocysteine에 대한 전기영동 이동거리로 $20{\mu}g/ml$ 일 때 가장 낮았으며 공액 2중결합 형성도 $20{\mu}g/ml$ 일 때 거의 억제되었다. 한편 S-allylmercaptocysteine을 항산화제인 $d{\ell}-{\alpha}$-tocopherol과 LDL에 대한 항산화력을 비교한 결과 같은 농도에서 S-allylmercaptocysteine이 약간 높았다. 따라서 S-allylmercaptocysteine이 동맥경화의 발병과 진행을 예방하는 역할을 할 것으로 생각된다.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.54-60
• /
• 2019

The rapid development of the automobile industry is an important factor that led to the dramatic development of synthetic rubber. The tread part of tire that comes in direct contact with the road surface is related to the service life of the tire. Rubber compounds used in tire treads are often blended with SBR (styrene-butadiene rubber) and BR (butadiene rubber) to satisfy physical property requirements. However, when two or more kinds of rubber are blended, phase separation and silica dispersion problems may occur due to non-uniform mixing of the rubber. Therefore, in this study, we synthesized an SBR copolymer with the same composition as that of a typical SBR/BR blend compound by controlling butadiene content during ESBR (emulsion styrene-butadiene rubber) synthesis. Subsequently, silica filled compounds were manufactured using the synthesized ESBR, and their mechanical properties, dynamic viscoelasticity, and crosslinking density were compared with those of the SBR/BR blended compound. When the content of butadiene was increased in the silica filled compound, the cure rate accelerated due to an increased number of allylic positions, which typically exhibit higher reactivity. However, the T-2 compound with increased butadiene content by synthesis less likely to show an increase in crosslink density due to poor silica dispersion. In addition, the T-3 compound containing high cis BR content showed high crosslink density due to its monosulfide crosslinking structure. Because of the phase separation, SBR/BR blend compounds were easily broken and showed similar $M_{100%}$ and $M_{300%}$ values as those of other compounds despite their high crosslink density. However, the developed blend showed excellent abrasion resistance due to the high cis-1,4 butadiene content and low rolling resistance due to the high crosslink density.

• 한국농림기상학회지
• /
• 제25권1호
• /
• pp.17-27
• /
• 2023

포장에서 잡초의 발생은 농작물의 생산량을 크게 떨어트리는 원인 중 하나이고 SSWM을 기반으로 잡초를 변량 방제하기 위해서 잡초의 발생 위치, 밀도 그리고 이를 정량화하는 것은 필수적이다. 본 연구에서는 2020년의 국립식량과학원에서 잡초 피해를 입은 옥수수 포장의 영상데이터를 무인항공기를 활용해서 수집하였고 이를 배경과 옥수수로 분리하여 딥러닝 기반 영상 분할 모델 제작을 위한 학습데이터를 획득하였다. DeepLabV3+, U-Net, Linknet, FPN의 4가지의 영상 분할 네트워크들의 옥수수의 검출 정확도를 평가하기 위해 픽셀정확도, mIOU, 정밀도, 재현성의 지표를 활용해서 정확도를 검증하였다. 검증 결과 DeepLabV3+ 모델이 0.76으로 가장 높은 mIOU를 나타냈고, 해당 모델과 식물체의 녹색 영역과 배경을 분리하는 지수인 ExGR을 활용해서 잡초의 면적을 정량화, 시각화하였다. 이러한 연구의 결과는 무인항공기로 촬영된 영상을 활용해서 넓은 면적의 옥수수 포장에서 빠르게 잡초의 위치와 밀도를 특정하고 정량화하는 것으로 잡초의 밀도에 따른 제초제의 변량 방제를 위한 의사결정에 도움이 될 것으로 기대한다.

• 동아시아식생활학회지
• /
• 제5권1호
• /
• pp.41-51
• /
• 1995

Bone mass accretion during puberty appears to be critical in the development of peak bone mass. Although bone density of females in Korea has been studied, only a few studies have related bone mass with anthropometric patterns or puberty in the pubescent girls. This study was conducted as part of a study of major determinants of bone development during puberty. Subjects were aged 14∼16 yr(mean 14.97), and had no history of disorders or dedication use likely to influence bone or calcium metabolism. Bone mineral density and content were measured by dual energy X-ray absorptiometry using a Lunar DPX+Scanner (Lunar Madison, WI). Also, total body fat, and total lean body mass were assessed using a Lunar DPX dual-energy X-ray absorptiometer, Pubertal status was assessed according to the Marshall and Tanner guidelines. Serum levels of osteocalcin was measured by RIA using a commercial kit assay. Skinfold measurements were taken with a skinfold caliper(Lange Caliper, USA). Data were analyzed using the regression and GLM procedure of the statistical package SAS. The results indicated that the observed means for lumbar spine BMD and femoral BMD correspond to approximately 91% and 96% of the means for young adult females, respec tively. All subjects were menarchal, with the majority being in the middle to end stages of pubertal development. Total body BMD was positively related to fat mass(P<0.001), lean body mass and time since menarche, and negatively related to urine pyridinoline, serum alkaline phosphatase and osteocalcin. The data indicate that girls who reported lower age for menarche had significantly higher bone densities than girls who reported higher age for menarche. Attaining peak skeletal bone mass during puberty may reduce the incidence of osteoporosis in later life. this finding suggests that early menarche may augment peak bone mass, influencing the extent of bone loss later in adulthood. The results suggest that good nutrition in childhood appears to be needed not for growth and development, but possibly also to assure an optimal peak of bone mass and thus greater latitude for the maintenance or skeletal integrity in the face of bone losses. Troeps skinfold thickness was a better predictor of total BMD and total BMC than was any other skinfold thickness. The study did not find a relationship between total BMD and body fat %, but total fat was significantly positively related to total BMD(r=0.49) and total BMC(r=0.60). It supports earlier report that there was a significant correlation between TBMD and body weight. Conclusively, total fat, lean body mass and pubertal development could influence BMD in pubescent girls. Clearly, longitudinal studies are required to assess the effect of puberty on peak bone mass, and to define further the potential determinants of peak bone mass.

• 한국응용곤충학회지
• /
• 제49권4호
• /
• pp.351-355
• /
• 2010

본 연구는 시설재배 피망에서 발생하는 담배거세미나방의 가해에 따른 피해양상을 규명하고 밀도와 피해관계를 해석에 합리적인 해충관리의 기초자료로 활용하기 위하여 수행되었다. 잎에 대한 섭식량은 유충발육 진전에 따라 크게 증가하였다. 피해를 받은 잎은 원형 또는 타원형의 구멍이 뚫리거나 부분적으로 소실되었고, 과실은 다소 큰 구멍이 과실 표면에 뚫리거나 꽃받침 주위에 지저분한 식흔들이 있었다. 2008년 자연발생 포장에서 피해과율은 최고 3.5%에 달했고, 포장내 유충밀도와 높은 상관을 보였다. 망사케이지 접종시험에서 유충 접종수준이 높을수록 비상품과율이 증가하였고 수확 2주전 담배거세미나방 유충밀도와 수확된 과질에서 피해과 비율간에는 높은 상관관계가 있었다. 피해과율 1, 3, 5%를 유발히는 담배거세미나방 2령 유충밀도는 각각 0.2. 0.5, 0.8마리/주에 달했다.

• 한국수산과학회지
• /
• 제44권4호
• /
• pp.359-365
• /
• 2011

This study was conducted to investigate the production, elver stocking, rearing facilities and rearing method of eel culture to determine aquaculture management conditions for optimal rearing of eel Anguilla japonica. The production of eel culture was evaluated by the proportion of eels from the main inland fin fish species production in Korea. Elver stocking was assessed by the elver stocking densities of pond and recirculation culture. Rearing facilities were investigated according to the rearing tank size proportion of the pond and recirculation culture. We selected sample farms by region and by size. We visited sample farms and recorded the number of elvers stock for pond area, size of tanks, feed and feed quantity, and the size and number of harvest eels. The production capacity of Jeollanam-do and Jeollabuk-do were 71.9% and 21.3% respectively. This production quantity represented 93.2% of the total Korean eel production quantity. In Jeollanam-do, there are 236 eel farms, 202 pond farms, and 34 recirculation aquaculture facilities. The elvers' first density data by each aquaculture method revealed that elvers' first density varied more in recirculation system farms, as compared to pond aquaculture. In intensive pond farms, the elvers' first density decreased as the size of farm increased. There was a correlation between the size of tank(x) and the facility of a water wheel for dissolved oxygen in pond culture systems(y=0.022x-0.494; $R^2$=0.860). Another strong correlation was found between the weight of eel(x) and eel density(y) in pond culture systems(y=283.5x-0.27; $R^2$=0.992). Finally, there was a strong correlation between the length of eel(x) and the weight of eel(y) in intensive pond culture(y=0.0005x-3.2783; $R^2$=0.9775). The final survival rate did not differ significantly among pond sizes and culture types.

• 한국수산과학회지
• /
• 제45권4호
• /
• pp.351-357
• /
• 2012

To determine whether the seaweed Saccharina japonica can effectively utilize dissolved nutrients from Sebastes schlegeli fish cultures, a laboratory experiment was conducted in a static system for 7 days at ESFRI, NFRDI in Korea. The experiment included an S. schlegeli monoculture system and an S. schlegeli-S. japonica IMTA system. Saccharina schlegeli density ($415{\pm}24g$; mean${\pm}$SE) remained the same in all treatments, whereas seaweed density varied across treatments of 0, 0.5, 1, 2, and 3 kg (control and T1-T4, respectively). During the experiment, nutrient ($NH_4^+$ and $PO_4^{3-}$) concentrations were measured at 24-h intervals. $NH_4^+$ concentration of the control group increased from $0.117{\pm}0.021mg/L$ at the start of experiment to $5.836{\pm}0.904mg/L$ at the end of experiment. $NH_4^+$ concentrations of each treatment were $3.004{\pm}0.040$, $2.086{\pm}0.133$, $1.642{\pm}0.121$ and $0.775{\pm}0.007mg/L$ in T1, T2, T3, and T4, respectively, at the end of experiment. The concentration of $PO_4^{3-}$ exhibited a similar trend to $NH_4^+$ concentration. $NH_4^+$ and $PO_4^{3-}$ concentrations significantly decreased with increased S. japonica thallus density each day (P<0.05). The nutrient removal efficiency (NRE) and nutrient uptake rate (NUR) showed different relationships with changes in thallus density; NRE increased but NUR decreased as thallus density increased. Based on measured concentrations of $NH_4^+$ and S. japonica weight, regression analysis defined the relationship between as an exponential function, $Y=3.8165e^{-0.505X}$ ($R^2$ = 0.9552). Our results demonstrated that S. japonica can function as an efficient component in IMTA with environmental and potentially economic benefits for fish hatcheries.