• Journal of fish pathology
• /
• v.22 no.3
• /
• pp.263-273
• /
• 2009

There is an increasing number of reports describing Streptococcus parauberis as an important pathogen of cultured olive flounder Paralichthys olivaceus and starry flounder Platichthys stellatus in Korea. We tried to determine the effects of water temperature (14${^{\circ}C}$ and 21${^{\circ}C}$) on the pathogenicity in Streptococcal disease caused by S. parauberis. We have challenged 180 olive flounder by i.p injection to $2.0{\times}10^{7}$ live cells/fish. Mortality was monitored for 21 days post challenge. And histopathological characterizations as infection degree, tissue degeneration and/or bacterial distribution were investigated with H&E stain and in situ hybridization technique. Fifty percent and 16.7% of mortality occurred within 21 days at 21${^{\circ}C}$ and 14${^{\circ}C}$ water temperature, respectively. In most cases, the typical symptoms of olive flounder infected with S. parauberis were darkness of the skin, lethargy, mild abdominal distension cause by ascites, splenomegaly, congested liver and internal organs paleness. The pericardial sac contained large amounts of cloudy fluid. Numerous whitish nodules, which were variable in size and often confluent, were randomly scattered throughout the myocardium. Especially, pericarditis and/or myocarditis was observed in all tested fishes after death. Positive in reaction with S. parauberis were found in all tissues in situ hybridization analysis. The relative numbers of S. parauberis in heart were much more than in liver, spleen, kidney and stomach. We evaluated that S. parauberis strain causes serious damage in the pericardium, shortness of breath and the blood disorder. Therefore, pericarditis and myocarditis caused by S. parauberis were closely related to mortality of olive flounder.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.650-655
• /
• 2016

Gears are components of transmission which transmit the power of an engine to a machine and offer numerous speed ratios, a compact structure, and high efficiency of power transmission. Gear train design in the automotive industry uses simulation software. However, PTO (Power Take-Off) gear design for agricultural applications uses the empirical method because of the wide range of load fluctuations in agricultural fields. The PTO is an important part of agricultural tractors which transmits the power to various tractor implements. Therefore, a simulation was essential to the optimal design of the PTO. When the PTO gear is optimally designed, there are many advantages such as low cost, reduced size, and light weight. In this study, we conducted the bending and contact safety factor simulation for the PTO gear of an agricultural tractor. The bending and contact safety factors were calculated on ISO 6336 : 2006 by decreasing the face widths of the PTO pinion and wheel gear from 18 mm at an interval of 1 mm. The safety factor of the PTO gear decreased as the face width decreased. The contact safety factors of the pinion and wheel gear were 1.45 and 1.53, respectively, when the face width was 18 mm. The simulation results showed that the face width of the PTO gear should be greater than 9 mm to maintain the bending and contact safety factors higher than 1. It would be possible to reduce the weight of the PTO gear for different uses and working conditions. This study suggests that the possibility of designing an optimal PTO gear decreases as its face width decreases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.854-867
• /
• 2014

In the circumstance that high oil price state is continued over the world, the investment in crude oil development by oil major is a trend of increasing. Recently the number of delivered drill-ship for 5 years has been sharply increased all over the world and about twice than that of past 30 years. As addition to the increase of the drill-ship demand, the operation of drill-ships which is delivered recently is about 3,000 meters, ultra deep sea, on average and the work area is expending. Accordingly the drilling system including the size and length of pipe for drilling has been bigger and bigger and the power supply equipment for operation system also has large capacity. Unlike merchant vessel, high power and high voltage of diesel generators are required for drill-ship for which the demand for V-type 320 bore of diesel generator has increased. It is on the raised that the importance of lubrication oil cleaning for diesel generator on drill-ship which has longer time for construction, and also long term low load operation is unavoidable during commissioning of equipments. Recently it was reported that engine crankpin was damaged due to the hard contact caused by the abnormal wear down(Cam wear) on crankpin and bearing. The same pattern of wear down was found through the inspection on series vessels and the other vessel under commissioning. The purpose of this paper is to analyze of the wear mechanism based on the observation and theories and objective research from actual cases and to prepare the counter measures to avoid foreseeable damage when the lubricating oil is not properly cleaned.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.415-421
• /
• 2015

This paper describes the study of the design procedure for the step-by-step setup parameters and of the magnetizing method for performance and size reduction in the development of a haptic vibrator. The study of magnetization was accomplished by comparing the electromagnetic force in accordance with the horizontal and the vertical magnetization. The theoretical results indicated that the horizontal magnetization resulted in a better performance. The systematic design of a step-by-step procedure for establishing the design parameters was verified by testing the characteristics of the fabricated prototype product. The vibration response function analysis and electric field analysis were processed by decoupling of the analytical method, and these were determined to be in good agreement with the test results. The design parameters to contributing to the product reliability included the spring height, the welding position, and the coil position. The sensitivity of the electromagnetic field and the performance change were analyzed based on the design parameters. As a result, we proposed a design method to implement a reliability-based, high performance haptic vibrator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.192-201
• /
• 2018

This study intends to find efficient support methods for small and medium-sized businesses (SMBs) especially in the increasingly important mobile sector. We investigated regarding perceptions of mobile sector-specific support programs and their current state of usage, and perceptions of the new mobile market and the present conditions of each stage of production based on analysis of a survey that included 204 respondents in each SMB to achieve this goal. Concretely, detections through this research were the reasons for non-selection of support businesses, the future prospective mobile business area, the company's own first-preference item and the reason for the preference, plus new mobile areas of willingness to apply the company's own product and its own first-preference item, and the reason for the preference. In addition, we found out covering costs and revenue size of the maximum-revenue product for each stage (from the first to the fourth stage), the kind of a product's execution method connected to the product (e.g. self-production, outsourcing to another company to produce a product), and the execution method for pre-products. We can suggest a policy regarding efficient support alternatives for SMBs related to the mobile sector thanks to these findings.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.25-34
• /
• 2005

In this paper, we analyzed and measured the electrical crosstalk characteristics of a triplex transceiver module for ethernet Passive optical networks(EPONS). And we improved the electrical crosstalk levels using Dummy ground lines with signal lines. The triplex transceiver module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and a analog photodetector as a community antenna television signal receiver. And there are integrated on silicon substrate. The digital receiver and analog receiver sensitivity have to meet -24 dBm at $BER=10^{-l2}$ and -7.7 dBm at 44 dB SNR. And the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the Dummy ground line with $100\;{\mu}m$ space from signal lines and separates 4 mm among devices respectively, is satisfied the electrical crosstalk level compared to simple structure. This proposed structure can be easily implemented with design convenience and greatly reduced the silicon substrate size about $50\%$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.655-662
• /
• 2016

This study proposes that a diving supervisor, who can perform the role of both a field manager and a supervisor, be introduced in the national qualification system. The goal was achieved by surveying the general status of the commercial diving sector, including the statistics of an underwater construction company, commercial diving equipment operation condition, diver working hours, diver supply and demand status, and underwater construction market size. The national qualification and national competency standard (NCS) systems were also analyzed to deduce the role definition and work scope of the diving supervisor. Consequently, the following proposition is made: the diving supervisor should be an "on-site manager with the highest job skill in the commercial diving field, who can perform the on-site process management as well as guide, supervise, and educate project participants and serve as an intermediary between the contractor and the workers." The responsibilities of the diving supervisor are proposed to include "diving planning and operation of the diving team," "diving with surface-supplied air and mixed-gas diving system," "chamber operation," "underwater construction," and "ship salvage." The persistent issues in commercial diving sectors, such as diver career development, management, and worker supervision, are expected to be largely resolved with the introduction of this qualification.

• Korean Journal of Plant Resources
• /
• v.30 no.4
• /
• pp.372-377
• /
• 2017

This research was performed to develop mass propagation method of Alpine modest primrose (Primula modesta var. hannasanensis T.Yamaz.) for improving the conservation and utilization of the species. Seeds were collected on August 2011 in Jeju-city and well-selected seeds were dry-stored at $4{\pm}1.0^{\circ}C$. Seed size ranged $0.44{\pm}0.07{\times}0.61{\pm}0.04mm$, and weight of 1,000 seeds was $51.78{\pm}0.021mg$. Thus the seed was classified as 'dwarf seeds'. As the result of dormancy characteristics, moisture content of freshly matured seeds increased rapidly by water-soaking treatment and seeds did not germinate at $20^{\circ}C$ for 4 weeks under the light condition. Therefore, seeds were estimated to have physiological dormancy. Germination conditions of dry-stored seeds were found to be $20^{\circ}C$ and light condition, and seeds did not germinated under dark condition regardless of all temperature regimes. Therefore, Alpine modest primrose seed was considered as photoblastic type. Percent germination (PG) and germination energy (GE) were greatly improved by soaking the seeds in $GA_3$ and kinetin for 24 hours. Especially, 200~500 mg/L $GA_3$ treatment resulted in the highest PG (95.5%) and GE (98.3%). So, chemical treatment such as $GA_3$ was thought to be a useful method for raising seedling uniformly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.639-648
• /
• 2017

Electronic warfare systems for extracting information of the threat signals can be employed under the circumstance where the power of the received signal is weak. To precisely and rapidly detect the threat signals, it is required to use methods exploiting whole energy of the received signals instead of conventional methods using a single received signal input. To utilize the whole energy, numerous sizes of windows need to be implemented in a detector for dealing with all possible unknown length of the received signal because it is assumed that there is no preliminary information of the uncooperative signals. However, this grid search method requires too large computational complexity to be practically implemented. In order to resolve this complexity problem, an approach that reduces the number of windows by selecting the smaller number of representative windows can be considered. However, each representative window in this approach needs to cover a certain amount of interval divided from the considering range. Consequently, the discordance between the length of the received signal and the window sizes results in degradation of the detection performance. Therefore, we propose the weighted energy detector which results in improved detection performance comparing with the conventional energy detector under circumstance where the window size is smaller than the length of the received signal. In addition, it is shown that the proposed method exhibits the same performance under other circumstances.

• Journal of Sericultural and Entomological Science
• /
• v.14 no.2
• /
• pp.95-103
• /
• 1972

The major purpose of this study is to collect the information related on the aspects of economic efficiency for solving the problems which are faced by farmers and areas, and providing scientific facts to farmers and related institutions for further development of sericultural sector in Korea. In order for obtaining the related information 12 sample areas among 23 major sericultural farming areas and 30 farm units in each area are selected and analyzed in this study. The fold suevey is made by member of this study team and graduate students in the Department of Sericultural Science with a prepared questionnaires. Cross-section and regression analysis methods are employed for processing the data in this study. The major findings obtained are as followings. 1. Sericultural earnings per Tanbo is, on the average, 22, 752 won in new cultivated areas and 29, 403 won in ordinary ones. There are big difference in the size of earnings by areas, especially, 46, 968 won in Kumo mountain area, compared with 16, 798 won in Yeoju and Yichun areas. General trend is finded that small scale farming units are made higher earnings and operating their farms efficiently. 2. Cocoon production expences per Tanbo is 16, 737 won in new cultivated areas and 19, 802 won in ordinary areas. There are also big difference in farming expences, especially, 27, 389 won in Sudang area, compared with 11, 689 won in Emjin area. 3. Sericultural income per Tanto is 10, 664 won in ordinary areas and 6, 898 won in new cultivated areas. Farmers in Kumo mountain area make the highest income of 21, 164 won and lowest income of 1, 296 won in Sudang area. It can be generized that about 30-50 a sized farmers make higher income. 4. Land, labor and capital productivities estimated by fitting Cobb-Douglas functions in ordinary areas are higher than in new cultivated areas, especially, labor productivity is higher in ordinary areas. 5. Changsung, Kwangna, Yunsun and Kumo mountain areas are technically and economically efficient. Sudang and Mujinchang areas are technically successful but economically inefficient and Emjin and Honam areas are technically inefficient but economically efficient. YeojuYichun, Chunwon and West Kyongnam are technically and economically inefficient. Technical and economic improvement program should be implemented for these areas. 6. Estimated Internal Rate of Return (IRR) on capital investment in Chongwon are is 23.5 percent. It is economically feasible, if we consider 20 percent of opportunity cost of capital in our economy.