• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.127-130
• /
• 2009

High luminance 3D built-in PDP panel was developed with newly adopted fast-decaying phosphor. Luminance of 3D PDP was increased about 40% by reducing the particle size of RGB phosphors and using $Y_3(Al,Ga)_5O_{12}:Ce^{3+}$ phosphor. Decay time of developed 3D PDP was 5.2ms/4.9ms for Red/Green color.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.276-281
• /
• 2002

A metallurgical model for bainite transformation kinetics in the coarse-grained heat affected zone(CGHAZ) on the basis of an Avrami-type equation was studied. Isothermal transformation tests were carried out to obtain the empirical equations for incubation time and Avrami kinetic constants for C-Mn-Mo-Ni steel. The effect of prior austenite grain size(PAGS) on the reaction rate of bainite was also investigated. Compared with experimental transformation behavior of bainite, the predicted behavior was in good agreement. It was also found that a smaller grain size retard the bainite reaction rate, contrary to the classical grain size effect and this is considered to be caused by constraint of grain size to bainite growth.

• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.11-14
• /
• 2002

A metallurgical model for bainite transformation kinetics in the coarse-grained heat affected zone(CGHAZ) on the basis of an Avrami-type equation was studied. Isothermal transformation tests were carried out to obtain the empirical equations for incubation time and Avrami kinetic constants for C-Mn-Mo-Ni steel. The effect of prior austenite grain size(PAGS) on the reaction rate of bainite was also investigated. Compared with experimental transformation behavior of bainite, the predicted behavior was in good agreement. It was also found that a smaller grain size retard the bainite reaction rate, contrary to the classical grain size effect and this is considered to be caused by constraint of grain size to bainite growth.

• 한국수소및신에너지학회논문집
• /
• 제23권3호
• /
• pp.256-263
• /
• 2012

We studied the degradation phenomenon of Pt catalyst in PEMFC. We used the electron microscope analysis technique including the ultra-microtome pretreatment method, FEG-SEM and TEM analysis methods for analysis of Pt nanoparticles. The Pt catalyst degradation is observed not only in electrode site but also in membrane site. We investigated these various degradation phenomena. The cathode electrode layer thickness is reduced. The size of the catalyst is increased much larger than initial size in membrane site. The catalyst moved from electrode layer to the electrolyte membrane. The rounded shape of catalyst was changed to the polygon. As a result, we found that the catalyst degradation processes of migration and coarsening occurred by the followings mechanisms; (1) dissolution of Pt ; (2) diffusion of Pt ion ; (3) Pt ion chemical reduction in membrane; (4) Coarsening of Pt particles (Ostwald ripening) ; (5) polygon shape change of Pt by {111} plane growth.

• 수산해양기술연구
• /
• 제42권4호
• /
• pp.210-216
• /
• 2006

The circle hook experiments were conducted to compare the catch rates of target and bycatch species between J hook and circle hooks in the tuna longline fishery of the eastern Pacific Ocean between $1^{\circ}48'S-7^{\circ}00'S\;and\;142^{\circ}00'-149^{\circ}13'W$ from July 15 to August 12, 2005. In the target species group no significant differences among 3 types hook, between size 4.0 traditional tuna hooks(J-4) and size 15 circle hooks(C15), and between C15 and size 18 circle hooks(C18) were revealed, but significant differences were found between J-4 and C18. In the bycatch species group significant differences were found among 3 types hook, between J 4 and C15, and between J-4 and C18, but no significant differences were revealed between C15 and C18. Large circle hook(C18) had the lowest catch rate for tunas and for other fishes, and the small circle hook(C15) had lowest rate for billfishes and sharks. The length distributions for bigeye tuna are very similar for the 3 hook types. There were very slight differences in length size between hook types in the bycatch species.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.296-296
• /
• 2022

This study was investigated to compare the milling and physicochemical characteristics of six Korean wheat cultivars (Keumkang, KK; Jokyung, JK; Goso, GS; Joongmo2008, JM; Baekkang, BK; Saekeumkang, SKK) and five foreign wheat classes (Australian standard white wheat, ASW; Australian hard, AH; US northern spring, NS; US hard red winter, HRW; Soft wheat, SW). Korea and foreign wheat grains were milled using a Buhler MLU-202. Flour moisture, ash, protein, gluten, sedimentation, particle size, solvent retention capacity (SRC) and dough properties of flour were analyzed. Results showed that the hard wheats had a greater total flour yield and reduction fraction yield than the soft wheats regardless of the country. However, there were in the milling characteristics between the US and Korean soft wheats. GS, a soft wheat in Korea, had the lowest flour yield (59.6%) and the highest bran fraction yield (21.4%). The particle sizes of flour by milling fraction were B1>B2>B3 for the largest, and the R1〈R2〈R3 for the smallest. Particle size, ash, protein contents and the values of lactic acid SRC showed highly correlated with flour yield. The gluten-performance-index (GPI) is the ratio of the lactic acid SRC value to the sum of sodium carbonate and sucrose SRC values, and it has been used as a quality indicator for overall performance potential of flour. GPI values differed depending on the wheat variety or class, JM (0.82) was the highest value, and SKK (0.56) and SW (0.59) were low. The curve pattern of the Mixolab result also gives a quality indication of the flour sample. JM and NS flour had similar pattern at water absorption and gluten strength parameters and BK and HRW had similar viscosity patterns. These results will enable further study for blending Korean wheat cultivar to improve the flour quality.

• 수산해양기술연구
• /
• 제41권4호
• /
• pp.279-288
• /
• 2005

The mesh selectivity of drum net traps for Buccinum opisoplectum Dall caught in the eastern sea of Korea was described. Several experiments were conducted between July 2003 and March 2004 and the data obtained from the experiment was fitted by SELECT (Share Each Length class's Catch Total) model with unequal fishing and sampling efforts. The selection curve was determined to be 'estimated fishing efficiency' by model deviance rather than AIC. However the fishing efficiency between 20mm and 35mm mesh size did not seem to be different. The $L_{50}$ lengths of the selectivity for the 55mm and 75mm mesh size were 65.4mm and 96.0mm, respectively.

• 수산해양기술연구
• /
• 제41권3호
• /
• pp.179-187
• /
• 2005

This study was conducted in order to the experiment of bottom trawl fisheries in the sea mount of central northern pacific($30^{\circ}-40^{\circ}N$, $170^{\circ}-175^{\circ}E$), during the period of July 1 to August 25, 2004 by commercial trawl ship. Fishing experiment was carried out by bottom trawl, with the codend of 110mm mesh size. The number of 101 test fishing was done in the sea mount of central northern pacific during 56 days and the total catches were 198,593kg as 18 fish species, and CPUE/day and catches/day were 8.3 hours towing time and 3,546kg. Catch ratio according to each fishing ground was higher with the order of B, C, and E, and catches for B was 7,171.0kg during the towing time of 13.2 hours. Main target species were Pseudopentaceros richardsoni and Beryx splendens, there was 14.9% of damage ratio for fishing gears on catching the target fishes inhabiting on the rough sea bottom. Catches by water depth was the order of 300m below, 301-350m, 451-500m and 351-400m. It is thought that there was no problem on the mesh size because most of fishes caught from the experimental fishing was 30cm over.

• 대기
• /
• 제30권2호
• /
• pp.141-154
• /
• 2020

Seasonal forecast is growing in demand, as it provides valuable information for decision making and potential to reduce impact on weather events. This study examines how operational climate prediction systems can be reliable, producing the probability forecast in seasonal scale. A reliability diagram was used, which is a tool for the reliability by comparing probabilities with the corresponding observed frequency. It is proposed for a method grading scales of 1-5 based on the reliability diagram to quantify the reliability. Probabilities are derived from ensemble members using hindcast data. The analysis is focused on skill for 2 m temperature and precipitation from climate prediction systems in KMA, UKMO, and ECMWF, NCEP and JMA. Five categorizations are found depending on variables, seasons and regions. The probability forecast for 2 m temperature can be relied on while that for precipitation is reliable only in few regions. The probabilistic skill in KMA and UKMO is comparable with ECMWF, and the reliabilities tend to increase as the ensemble size and hindcast period increasing.

• 한국추진공학회지
• /
• 제20권1호
• /
• pp.14-19
• /
• 2016

HTPB/AP계 혼합형 고체 추진제의 점도와 기계적 특성은 산화제인 AP의 입자 크기에 크게 영향을 받는다. $190{\mu}m$의 크기의 AP와 $7{\mu}m$ 크기의 AP를 사용한 HTPB/AP 추진제에서 큰 입자/작은 입자의 비율이 70/30~60/40 범위인 조성의 추진제가 매우 낮은 점도를 나타났는데, 이것은 고체입자의 충전율이 높은 상태이기 때문이다. 추진제의 인장강도 시험에서 Toughness는 큰 입자의 함량이 많아질수록 증가하는 것으로 나타났다. 낮은 점도와 좋은 인장강도를 동시에 고려할 때, AP 큰 입자와 작은 입자를 70/30으로 사용하는 것이 가장 효과적인 것으로 분석되었다.