• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2833-2845
• /
• 2012

In this study, the amount of waste resource that could be recovered was analyzed. The installation and operation costs of waste resource recovery for both single- and multi-regional facility were calculated, and compared with the costs of landfill to investigate the feasibility of them. RDF(Refuse Derived Fuel) process and resource recovery by incineration process were considered as waste resource recovery facility. And, the multi-regions for cost analysis were established on the basis of the proper generation rate of municipal waste with the consideration of combustible ratio. The study results showed that single region facility for both RDF and incineration process has no economic benefit, compared with the landfill method. For the multi-regional facility, RDF process could save a large cost than the landfill method, but the incineration facility couldn't. Separate from the economic benefits, the waste resource recovery should be importantly considered when considering the depletion of fossil fuel, global warming, environmental toxicity, and the enormous expenses due to social conflict and confuse. When the CDM(Clean Development Mechanism) is vitalized in the near future, the additional economic benefits by CERs(Certified Emission Reductions) could be expected. CERs for RDF facility is corresponding to about 256.5 billion won, and CERs for incineration facility is corresponding to about 54 and 77.4 billion won for single- and multi-regional facility, respectively.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.537-545
• /
• 2005

Traditionally Jeju island has a mild oceanic climate throughout the year and famous as worldwide resort area bemuse of its pure natural environment and dramatic coastal scenery. But unpredicted coastal erosion problem, mused by variation of environmental conditions from construction of coastal structure and renovation of the existing ports, has raised its head above the water, and is becoming serious these days just like other coastal area in Korea. The phenomena happen here along the seaside of southern part of the island show that severe changes in coastal line from erosion and even witnessed the coastal cliff failure. In advanced countries, coastal engineers and researchers have studied deeply about this kind of problem for a long time. However, as it is not sot active in Korea and lack of research data, there exists difficulties on building protection methods and thoughtless constructions might make it more complicated and fatal to the coastal environment. In this study, we investigated some case studies of other countries and intended to induce and propose some integral protection methods for coastline erosion, considering environmentally sound and water friendly way of development such as artificial reef, floating breakwater, and double cellblock breakwater. Finally, we made analysis on the proposed methods with numerical model test and evaluation on the feasibility of each method.

• Cartoon and Animation Studies
• /
• s.42
• /
• pp.105-123
• /
• 2016

The webtoon market has been consisently developing in the digital market. Under such circumstances, The Korea webtoon market is rapidly growing and leading of them. This is the time to prepare the base of a stable environment for the webtoon market which shows a swift rise. The Korean webtoon is surely aiming at the global market as well as the domestic one. As the Korean webtoon companies spread out to the world briskly, The leading publication cartoon market, Japan tries to break into the Korean digital market. The domestic market that has the good-quality cartoons through exportation and importation to make people of all ages enjoy them. and also the Korean webtoon is in the center of the global webtoon markert. The early model of Korean webtoon, line-webtoon is translated in English, Chinese, Thai language and Indonesian language to use on the mobile applications and web. Nevertheless, It is just the stating point. With Eradicating of the Achilles heel of the digital contents, illegal distribution and finding materials for cultural discount rate minimized cartoon, The Korean webtoon can become the highest in the global market and hold it. Moreover, not only webtoon but also published cartoons are existing together to have a long run. Beyond the existing cartoon books printed on paper, we should reach toward the digital books with portability and economic feasibility to make the contents stay out longer.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.767-773
• /
• 2011

The purpose of this study was to investigate the possibility of an alternative fuel resource by incinerating a mix of combustible MSW (municipal solid waste) and offals after separating recyclable material at the MRF (material recovery facilities) location. We analyzed the physical and chemical properties including the 3-contents, the calorific value, and chemical compositions of the separation rejects in MRF, and compared the results with combustible MSW. Moreover, we experimented the trend of combustible properties and the concentration change of air pollutants at mixed incineration in the MSW incinerator. According to the results of the experiment, the separation rejects showed higher heating value (5,865 kcal/kg), and lower moisture and ash content than combustible MSW. Since we have incinerated MSW in the MSW incinerator mixing the offals at 30% and 50% respectively, we know that the change of the concentration of dust, $SO_2$, $NO_2$, and CO did not appear significant, and not exceed the pollutants emission regulation. But, considering the enhancement of the HCl emission concentration (max. 33.7 ppm) at the co-incineration of the 50% offals, we believe that the proper mixing ratio of the separation rejects would become within 30%.

• Journal of Biomedical Engineering Research
• /
• v.27 no.6
• /
• pp.418-426
• /
• 2006

In the artificial heart application, productivity and hemodynamic properties of artificial heart valves are crucial in successiful application to long term in vivo trials. This paper is about manufacture and assessment of trileaflet polymer heart valves using vacuum forming process(VFP). The VFP has many advantages such as reduced fabrication time, reproducibility due to relatively easy and simple process for manufacturing. Prior to VFP of trileaflet polymer heart valves, polyurethane(Pellethane 2363 80AE, Dow Chemical) sheet was prepared by extrusion. The sheets were heated and formed to mold shape by vacuum pressure. The vacuum formed trileaflet polymer heart valves fabrication is composed of two step method, first, leaflet forming and second, conduit forming. This two-step forming process made the leaflet-conduit bonding stable with any organic solvents. Hydrodynamic properties and hemocompatibility of the vacuum formed trileaflet polymer heart valves was compared with sorin bicarbon bileaflet heart valve. The percent effective orifice area of vacuum formed trileaflet polymer heart valves was inferior to bileaflet heart valve, but the increase of plasma free hemoglobin level which reflect blood damage was superior in vacuum formed trileaflet polymer heart valves Vacuum formed trileaflet polymer heart valves has high productivity, and superior hemodynamic property than bileaflet heart valves. Low manufacturing cost and blood compatible trileaflet polymer heart valves shows the advantages of vacuum forming process, and these results give feasibility in in vivo animal trials in near future, and the clinical artificial heart development program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.609-614
• /
• 2017

In this study, a new type of eccentric cam was used for the development of a small size reducer with a two-shift reduction ratio while maintaining the same volume as the existing one-shift speed reducer. Therefore, a two-shift speed reducer was designed using the concept of a continuously variable transmission applied to automobiles. The cam was designed to have an eccentric shape with a $180^{\circ}$ phase difference to act as a tensioner to minimize slip by squeezing the V-belt connected to the deceleration pulley and the acceleration pulley, respectively. The cam was designed to have a diameter of 35mm and an outer diameter of 18mm so that the outer portion of the v-belt could contact the cam perfectly. A pulley with a diameter of 50.8mm was installed on the low speed pulley input shaft for deceleration and a pulley with a diameter of 76.2mm was provided on the output shaft. In the high-speed pulley for acceleration, a pulley with a diameter of 76.2mm is provided on the input shaft, and a pulley with a diameter of 50.8mm is provided on the output shaft. Based on the design details, the power transmission efficiency test and the heating characteristics of the transmission were tested to verify the feasibility. In addition, through validation, the suitability of the reducer was demonstrated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.155-167
• /
• 2016

Technology valuation is necessary for determining the feasibility of technology commercialization. However, existing methods focus only on technology evaluation, with limitation in sufficiently reflecting buyer viewpoint. In addition, it causes a gap between estimated value and market value. Therefore, this research suggests a new technology valuation method which focuses on the perspectives of buyers. Technology factors, buyer factors and market factors are first determined and their relationships are analyzed. Second, based on the relationships, profit projections are calculated using the discount cash flow method. Finally, profit projections for each year are discounted. The proposed method was applied using the ubiquitous home network system and audio service and illumination control method and results compared with the value of a technology valuation guide distributed by the Ministry of Trade, Industry and Energy. The technology valuation approach used in this research is quantitative and systematic and can be used as a decision making support tool in technology transfer, reflecting various perspectives of stakeholders.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1053-1063
• /
• 2014

This study presents a sustainable design method that optimizes the embodied energy of concrete beam based on the concept of sustainable development that effectively utilizes natural resource and energy within the range that our succeeding generation can afford to utilize. In order to get the flexural strength carrying the ultimate load, concrete beam sections are designed by optimization that consists of the embodied energy as a objective function and the requirements of design code as constrained conditions. The sustainable design can be used to minimize the embodied energy consumed in material production, construction, operation, demolition of the infrastructure. As a result of comparison of the cost and the embodied energy optimizations based on practical beam sections, it is shown that 20% embodied energy saving and 35% $CO_2$ emission saving are achieved by sacrificing 10% cost increase. The sustainable design method provides a new effective methodology that manages the strength design concept based on cost minimization together with economic feasibility and sustainability. In addition, the method is expected to be applied to more various structural design practices.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.70-75
• /
• 2016

The reuse of wastewater is being diffused to manage and develop the water resources. Generally, the treated wastewater is discharged to the river after being treated to meet the effluent quality standard or reused for diverse uses through the reprocessing. And recently, as the reuse of the treated wastewater is activated, the technologies to utilize for the high quality water resources such as industrial water by reusing the wastewater with Membrane Distillation (MD) are under development. In this study, the direct contact membrane distillation (DCMD) process has been applied to treat sewage discharge water for water reuse. The laboratory scale experiment was performed by using a hydrophobic PVDF membrane with the pore size of $0.22{\mu}m$. The influence of operating parameters, such as feed temperature, feed flow rate, feed concentration, on the permeate flux and rejection has been investigated. All filtration tests were conducted till the feed volume reached a concentration factor of 3.0. Thus, the operating period ranged between 19 hr and 49 hr depending on filtration performance. The results showed that above 92% of TN, TP, COD and TOC in the feed could be rejected regardless of an operating condition. The water flux was ranged from 13.8 to 20.3 LMH. The lowest flux was obtained at the operating condition with the feed temperature of $50^{\circ}C$ and feed flow velocity of 500 mL/min while the highest one was measured with $60^{\circ}C$ and 900 mL/min. When the concentration factor reached 3.0, water flux declined by approximately ranged from 14.5% to 33.3%. But the fouling in MD is almost fully reversible, with more than 90% recovery of permeate water flux following a DI water rinse without the addition of chemical cleaning reagents.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8573-8578
• /
• 2016

Background: This study was guided by principles of the theoretical system of evidence-based medicine. In particular, when searching for evidence of breast cancer, a measuring scale is an instrument for evaluating curative effects in accordance with the laws and characteristics of medicine and exploring the establishment of a system for medically assessing curative effects. At present, there exist few tools for evaluating curative effects. Patient-reported outcomes (PROs) refer to outcomes directly reported by patients (without input or explanations from doctors or other intermediaries) with respect to all aspects of their health. Data obtained from PROs provide evidence of treatment effects. Materials and Methods: In accordance with the tenets of theoretical medicine and ancient medical theory regarding breast cancer, principles for developing a PRO scale were established, and a theoretical model was developed and a literature review was performed, items from this pool were combined and split, and an initial scale was constructed. After a pilot survey and additional modifications, a pre-questionnaire scale was formed and used in a field investigation. After the application of statistical methods, the item pool was used to create a formal scale. The reliability, validity and feasibility of this formal scale were then assessed. Results: In a clinical investigation, 479 responses were recovered, with an acceptance rate of 95%. a combination of various methods was employed, and the items that were selected by all methods or more than half of the methods were employed in the questionnaire. In these cases, the screening methods were combined with certain features of the item, A total of four domains and 38 items were reserved. The reliability analysis indicated that the PRO scale was relatively reliable. Conclusions: Scientific assessment proved that the proposed scale exhibited good reliability and validity. This scale was readily accepted and could be used to assess the curative effects of medical therapy. However, given the limited scope of this investigation, the capacity for adapting this scale to incorporate other theories could not be determined.