• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.380-387
• /
• 2016

Considering that the Seoul subway sector is expected to see extension of lines, addition of stations, and changes of operating companies, a review is needed to identify ways to eliminate or minimize financial deficits in its operation. As for deficits from the operation, additional businesses for extra income have been suggested as alternatives, but inasmuch as Western urban development (that of the subway containment area) may not be applicable to Korean settings, a practical alternative is to maximize income by efficient use of rental facilities that are located inside station properties. This alternative requires the estimation of appropriate facility size and rent for each station; few, however, have addressed this topic. At this juncture, this study aimed to draw an equation for estimating the sizes and rents of station properties by reflecting characteristics of lines and locations; a case study was performed for Subway Lines 5 and 6. Analytical findings are that rental facility sizes and rental incomes are affected mainly by the subway ridership and transport revenues, whereas the influence of ground-level commercial activity is relatively weak. A particularly great influence was found to be the value of apartment housing in areas through which the subway lines run. Stations on Line 5, which runs through areas of high-value housing, were assigned smaller facility sizes and higher rents than those on Line 6, which covers areas with relatively low housing value. The equation suggested in this study would make possible more practical feasibility studies when the need arises to estimate sales of new or extended facilities affiliated with stations.

• Journal of Technology Innovation
• /
• v.26 no.2
• /
• pp.129-149
• /
• 2018

Technology finance is an area in which financial authorities have introduced and implemented a strong policy will for the advancement of the financial industry and the development of SMEs. As a result, the Bank's own technology evaluation was conducted from September 2016. Technically superior companies are upgrading their credit ratings, and as a result, they benefit from financial transactions as much as their higher credit ratings through technology evaluation. Based on the data generated during this process, we analyze the degree to which credit ratings was upgraded by technology evaluation. The pre study handles 406 data from KEB Hana Bank's technology evaluation conducted in the second half of 2016. As a result of combining the credit rating with the calculated technology rating, J58 'Publishing Activities' technology-credit rating is raised by 1.05 rating, which is the highest, and C10 'Manufacture of Food Products' is the second highest. As a result, we were able to identify the sectors that benefited from the technology evaluation and confirmed the usefulness of technology evaluation by industry(KSIC). To expanding the study, 2,719 companies evaluated during the entire period were analyzed by technology grade, business experience and promising growth industry code. As a result of the analysis, technological power over T-4 grade companies had the highest credit rating upgrades. The companies belonging to promising growth industries designated for efficiency of policy support, it is confirm that the support of the promising business type was useful because the credit grade was upgraded through technology evaluation. The validity of the technology evaluation based on the five-year business experience was found to be insignificant. In the future, it will be possible to maximize the support effect by concentration on the companies with over T-4 grade and growth potential companies when supporting SMEs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.12
• /
• pp.1097-1107
• /
• 2015

General VTOL aircraft uses gas turbine engine which has high power to weight ratio. However, in the VTOL UAV in small sector, the gas turbine as a prime mover is not adequate because of the limitation of the high fuel consumption ratio of the gas turbine. In this research, The Series Hybrid-Electric Propulsion System(SHEPS) has been proposed and technology survey & comparison analysis has conducted to constitute propulsion system for engine, electric motor and battery. To achieve this object a 65kg-class P-UAV from "Company I" was used. And to estimate the validity of power control algorithm and developed power management control, Matlab/simulink$^{(R)}$ has been used for the simulation. As a result, the developed algorithm worked comparatively well and the research has predicted that SHEPS was satisfied enough for 7 hour of endurance for mission profile.

• Journal of KIISE:Software and Applications
• /
• v.36 no.6
• /
• pp.431-442
• /
• 2009

The Software Product Line (SPL) engineering is one of the most promising software development paradigms. With Feature-Oriented Reuse Method (FORM), reusable and flexible components can be built to aid the delivery of various software products such as mobile phone and digital TV applications based on commonalities and variabilities identified during Feature modeling. Model Driven Architecture (MDA) is also an emerging technology which supports developing software products to work on different platforms with platform independent models (PIM). Combining advantages of these two approaches is helpful to build a group of software products which share common Features while working on various platforms. As first step to combine FORM with MDA, we extend UML2.0 with profiles by which FORM architectures and parameterized Statecharts can be modeled. Secondly, we provide rules to examine whether Features are allocated at positions of elements of Statecharts consistently between a Feature model and a parameterized Statechart. Some rules are designed to check the consistency between FORM architectures and parameterized Statecharts. A case study on an elevator control system is provided to demonstrate the feasibility of our modeling approach and consistency checking rules.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.381-388
• /
• 2010

In this study, characteristics of the seismic response of the non-earthquake resistant reinforced concrete (RC) frame were identified. The test building is designed to withstand only gravity loads and not in compliance with modern seismic codes. Smooth bars were utilized for the reinforcement. Members are provided with minimal amount of stirrups to withstand low levels of shear forces and the core concrete is virtually not confined. Columns are slender and more flexible than beams, and beam-column connections were built without stirrups. Through the modeling of an example RC frame, the feasibility of the fiber elementbased 3D nonlinear analysis method was investigated. Since the torsion is governed by the fundamental mode shape of the structure under dynamic loading, pushover analysis cannot predict torsional response accurately. Hence, dynamic response history analysis is a more appropriate analysis method to estimate the response of an asymmetric building. The latter method was shown to be accurate in representing global responses by the comparison of the analytical and experimental results. Analytical models without rigid links provided a good estimation of reduced stiffness and strength of the test structure due to bond-slip, by forming plastic hinges closer to the column ends. However, the absence of a proper model to represent the bond-slip poased the limitations on the current inelastic analysis schemes for the seismic analysis of buildings especially for those with round steel reinforcements. Thus, development of the appropriate bond-slip model is in need to achieve more accurate analysis.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.309-316
• /
• 1995

RF (radio-frequency) probes of Nuclear Magnetic Resonance are one of the important factors and should be designed and built properly depending upon the geometry of the samples and the information. In general there are two kinds of rf probes : one encircles the sample while the other is placed on the surface of the sample. However, in case that the samples on human internal organs have a tube shape, the two kinds of rf probes, as specified above, are usually unsuitable for the internal imaging due to the degradation of signal-to-noise ratios (SNR's). In this case a probe should be positioned as close to the area as possible by putting the probe in the tubelike sample to improve filling factor In the present study inside-out probes have been constructed in the three different shapes such as an anti-solenoidal, a saddle and a dual surface types. RF-field distributions have also been calculated depending upon the geometrical changes of anti-solenoid probes. Moreover, the performance of the inside-out probes has been checked by measuring SNR's of the images acquired. The inside-out probes constructed in this study produced better SWR's and rf-field uniformity in the area close to the probes in comparing with any other commercial probes. There is a high feasibility that the constructed probes in the present study are applicable to the diagnosis of human bodies.

• Culinary science and hospitality research
• /
• v.15 no.2
• /
• pp.150-160
• /
• 2009

This study analyzed the quality characteristics of demi-glace sauce with different addition of roux which is usually used as a thickener. The trust level and acceptability for commercial demi-glace sauce were surveyed in order to draw the visual idea and direction for the development of large scale commercial production of demi-glace sauce. Also, the optimal level of salt and roux content in the sauce was determined with various cooking conditions. As the roux content increased, the color became light and the viscosity of the sauce increased while pH, salinity and brix were not affected much by amount of roux. The professional chefs as well as general sensory panel preferred the demi-glace sauce prepared with 9% roux. To sum up, it can be claimed that the optimal conditions established in this study for commercial production of demi-glace sauce ensure the desired quality and economic feasibility.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.108-115
• /
• 2016

The price determinant for land investment depends on the internal information process and subjective decision making by management in general. Accordingly, the systematic frame to determine the feasibility of investment price to the public residential land for multi-housing development by private sector has not been proposed. The purpose of this study is to explore the frame to determine the investment price for public residential land from the perspectives of land attribute and apartment market factor. Multiple regression has been implemented to confirm the eligibility of proposed model. Research findings indicate that the land area, floor area ratio, coverage ratio, location have been identified as the total land cost determinant, and for the determinants for floor area land cost, the ratio of apartment, sale price, rent price, etc, have been identified. This research intends to provide the basis for land providers to predict the land value as a raw material in market and present the indicators for land buyers to review the price adequacy for the investment.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.372-382
• /
• 1992

Recreation planning is essential activity to meet changing demands and to protect the resources. The recreation opportunity specturm(ROS) system is a principal part of a recreational management planning. In this study, the basic concepts and tenets of the ROS system described and reviewed the feasibility of applying to forest recreation planning to the Korean national forest. In Korea, the forest land as a major recreation place has used without the rational planning process. The control for the laissez-faire use on the forest area, the classification of recreational opportunity settings is the most important process and then it make a useful tool for providing proper recreational opportunity and site development guidance. Opportunity settings classification can help maintain diversity and enhance protection of forest resources. It can also improve the quality of recreational experiences and the management action guidances. GIS technology using the ARC/INFO could be useful in current attempts to identify analysis areas for predictive modeling of forest recreation site planning.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.377-390
• /
• 2016

The aim of this study is 1) to design an auction-type and area-based payments for ecosystem services (PES) in application to private forest in Korea, 2) to develop the framework of index to implement the PES program proposed, and 3) to examine the feasibility and validity of the index framework by conducting a case study. The index framework measures quantities of ecosystem services currently supplied, improvement of ecosystem services anticipated from the proposed management activities, and real implementing costs of the program. The total scores from the case study vary from 301 to 501 for site 1, Goesan-gun and 273 to 460 for site 2, Pyeongchang-gun, respectively, indicating that total index score - measurement of cost-effectiveness - can be varied by the levels of management and real cost even if the scores from ecosystem service indicator group are the same. The index framework which can locate a cost-effective program has significant policy implication given the budget constraints in biodiversity/ecosystem services policy arena.