• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.58-59
• /
• 2016

Along with the logistics development, heavy-loaded warehouses and sales facilities tend to be bigger and designed as a PC structures. PC erection work of heavy-loaded structures is influenced by various factors, including the required construction duration, site and surrounding situations, safety, PC member procurement, equipment rental cost, which ultimately impact the construction cost. It requires creative efforts and a lot of time when preparing an erection plan in consideration of these factors, and the plan prepared has a great influence on safety as well as the construction duration and cost. However, many engineers do not have enough experiences on PC erection work of heavy-loaded, long span structures, making it difficult for them to set erection plans and establish simulations. The study's results will provide a knowledge to obtain a solution for engineers to establish PC erection plans of heavy-loaded, long span structures.

• 대한의용생체공학회:의공학회지
• /
• 제18권2호
• /
• pp.127-132
• /
• 1997

Recently there has been increased interest in the use of iontophoresis for the transdermal delivery of drugs, both ionic and nonionic. The use of iontophoresis has been rare over the years due to the lack of domestic supplies of the instrument and the expensive iontophoresis instrument made by foreign country. The purpose of this study was to design a commercially available iontophoresis system (WIT- 1 ). The efficacy of WT- 1 system was well defined. In clinical trial, procaine iontophoresis produced local anesthesia of significantly longer duration than swabbing and placebo groups. The 4% procaine iontophoresis using WIT-1 significant difference in anesthetic duration between WIT- 1 system and IontopherTM PM system. The result of this study suggest that WIT-1 system can be used for the transdermal delivery of drugs in various clinical conditions.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.673-677
• /
• 2004

We present the basic properties of a superconductive fuse (SF) based on YBCO/Au films. The SF consists of YBCO stripes covered with Au layers for current shunt. The fault current was limited to a designed value in less than 0.4 msec by resistance development in YBCO/Au upon quenching. This enabled the SF to transfer small fault power and the suppressed current was sustained for more than 0.5 msec while Au layer melting and arcing. The arcing time was less than 2.5 msec, that is short enough to do self-interruption. Under the source voltage of 100 $V_{rms}$, the longer the duration time of fault current was, the shorter its discharge time was. The duration time of fault current and its discharge time were reduced by increased voltages in the range of 200 - 300 $V_{rms}$. We thought that this was because the quench propagation was limited by local melting generated with higher voltage.age.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.56-59
• /
• 1996

The purpose of this study is to identify the cause of driver's drowsiness and to get information about driver's drowsiness from facial image using computer vision. We measured the driver's movements of a head and shoulders in the highway arid street. We also measured the eye blink duration and yawning duration of normal and drowsy drivers. from the results, we confirmed that the measurement of eye blink and yawning might be a way of drowsy detection.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.158-164
• /
• 2000

In this study a computer program is developed for analyzing the elasto-plastic dynamic behaviors of the plate subjected to line-loading by a low-velocity impactor. The equilibrium equation associated with the Hertzian contact law is formulated to evaluate the transient dynamic behaviour of the impacted plate. Compared with an elastic analysis, the effects of material plasticity are presented. Consequently, in the case of elasto-plastic analysys, impulse decreases, displacements increase and contact time duration is longer than the elastic case for same finite element model. And the time variation of the impacting load is not significant due to the plasticity except at the beginning of impact duration, and the induced stresses of the plate are more realistic.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2003년도 춘계 학술발표논문집
• /
• pp.54-57
• /
• 2003

Implementation of disease-warning systems often results in substantial reduction of spray frequency (Lorente et al., 2000; Madden et al., 2000). This change reduces the burden of pesticide sprays on the environment and can also delay the development of fungicide and bactericide resistance. To assess the risk of outbreaks of many foliar diseases, it is important to quantify leaf wetness duration(LWD) since activities of foliar pathogen depend on the presence of free water on host crop surface for sufficient periods of time to allow infection to occur.(omitted)

• 대한간호학회지
• /
• 제52권1호
• /
• pp.24-35
• /
• 2022

Purpose: This study investigated the incidence and risk factors of cataract in people with diabetes mellitus (DM) using data from Ansan cohort of the Korean Genome and Epidemiology Study (KoGES). Methods: Data from a total of 329 patients with type 2 DM without cataract who participated in Ansan cohort of the KoGES from baseline survey (2001-2002) to fifth follow-up visit (2011-2012) were examined. The characteristics of the subjects were analyzed with frequency and percentage, and mean and standard deviation. Cataract incidence was measured as incidence proportion (%). For risk factors of cataract, hazard ratio (HR) and 95% confidence interval (CI) were obtained using the Cox proportional hazard model. Results: The cataract incidence over a 10-year follow-up period was 19.1% (15.1 in males and 25.8 in females), and mean age at the incidence of cataract was 63.48 years (61.58 years in males and 65.31 years in females). Age (HR=1.09, 95% CI=1.05-1.13) and HbA1c (HR=1.21, 95% CI=1.07-1.37) or the duration of DM (HR=1.05, 95% CI=1.00-1.09) were found to be independently associated with cataract development. Conclusion: Cataract development in people with DM is common, and its likelihood increases with age, HbA1c, and the duration of DM. Considering negative effect of cataract on their quality of life and economic burden, nurses should identify people with DM at a higher risk of cataract development, and plan individual eye examination programs to detect cataract development as early as possible.

• 한국잠사곤충학회지
• /
• 제40권1호
• /
• pp.23-26
• /
• 1998

Exposure of freshly laid eggs of Exorista bombycis (Louis) to volatiles emanating from bulbs of Allium sativum L. for different durations resulted in signigicant reduction in their hatchability. Maggots hatched from the eggs exposured for 64 h and 72 h were failed to emerge from host larvae. The duration of development stages of E. bombycis was prolonged besides reduction in rate of pupation and adult emergence as the egg exposure period increased. The findings are interpreted as the chronic effects of volatiles of garlic affecting maggots following developmental defects sustainable during embryonic development. The known major chemical components of A. sativum such as allicin, thioacrolein, ajoune, 2-propene sulfenic acid, 2-propene thiol and propylene were presumed to be responsible for the adverse consequences reported in this paper.

• 토지주택연구
• /
• 제8권3호
• /
• pp.189-200
• /
• 2017

The work breakdown structure and the precedence relations by work activity are very important because they are the basic data for estimating the construction duration in the construction work. However, there is no standard to accurately estimate the construction duration since the size of the school facilities construction is smaller than the general construction work. Therefore, some schools are unable to open in March or September and the delay of the construction duration can cause damage to the students. To solve this problem, this study developed a work breakdown structure of school facilities construction work and analyzed the precedence relations by work activities. The work breakdown structure of the school facilities construction is composed of three steps. The operations corresponding to level 1 and level 2 are as follows. (1) 2 preparatory work categories; preparation period and temporary construction. (2) 17 architectural work categories; temporary construction, foundation & pile work, reinforced concrete work, steel roof work, brick work, plaster work, tile work, stone work, waterproof construction, wood work, interior construction, floor work, metal work, roof work, windows construction, glazing work and paint construction. (3) 7 mechanic and fire work categories; outside trunk line work, plumbing work, air-conditioning equipment work, machine room work, city gas plumbing work, sanitation facilities and inspection & test working. (4) 4 civil work categories; wastewater work, drainage work, pavement work and other work. (5) 1 landscaping work categories; planting work. The work breakdown structure was derived from interviews with experts based on the milestones and detailed statements of existing school facilities. The analysis of precedence relations by school facilities work activity utilized PDM(Precedence Diagramming Method)which does not need a dummy and the relations were applied using FS(Finish to Start), FF(Finish to Finish), SS(Start to Start), SF(Start to Finish). The analysis of this study shows that if one work activity is delayed, the entire construction duration may be delayed because the majority of the works are FS relations. Therefore, it is necessary to use the Lag at the appropriate time to estimate the standard construction duration of the school facility construction. Lag is a term used only in the PDM method and it is used to define the relationship between the predecessor and the successor in creating the network milestone. And it means the delay time applied to the two work activities. The results of this study can reasonably estimate the standard construction duration of school facilities and it will contribute to the quality of the school facilities construction.

• 토지주택연구
• /
• 제12권4호
• /
• pp.93-101
• /
• 2021

국내 소규모 가구가 점차적으로 증가함에 따라 소규모 가구를 위한 주거공급 정책에 대한 중요성이 높아지고 있다. 이러한 중요성에 따라 정부에서는 소규모 가구를 위한 도시형 생활주택을 지속적으로 공급해오고 있다. 도시형 생활주택은 공동주택, 일반 업무시설과 동일하게 분양 및 임대 사업이므로 발주자는 프로젝트 기획단계에서 적정공사기간을 산정하는 것은 중요하다. 그러나, 선행연구에서는 대규모 건축물의 공사기간을 산정할 수 있는 모델이 존재하나 도시형 생활주택과 같은 소규모 건축물에 대한 적정 공사기간 산정 모델은 부재한 것으로 분석되었다. 따라서 본 연구의 목적은 기획단계에서 발주자가 적정 공사기간을 산정할 수 있는 다중 회귀분석 기반 도시형 생활주택의 공사기간 산정 모델을 개발 및 검증하는 것이다. 개발된 모델에 입력되는 독립변수는 연면적, 수도권, 지하층수, 지상층수, 주 건축물 수, 강원권의 총 6개이며, 개발된 모델의 수정된 결정계수(R_a²)는 0.547로 분석되었다. 개발된 모델의 성능은 RMSE의 경우 171.26일, MAPE의 경우 26.53%로 도출되었다. 본 연구를 통해 개발된 모델은 발주자에게 신뢰성 있는 공사기간 산정 결과를 제공할 수 있을 것으로 기대된다.