• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.129-150
• /
• 1985

The present investigation was conducted to provide a systematic approach necessary to establish an integrated insect pest management program of barley in Korea. Some ecological surveys on insect pests of barley have been undertaken at the field of Experimental Station, Ky$\check{o}$ngbuk Provincial Office of Rural Development as a fixed point survey area, and at 23 localities for round survey throughout southern and central Korea from 1983 to 1984. Previously known insects injurious to barley in Korea were revised and the population dynamics of 10 dominant harmful species were analyzed according to either 24 localities or 25 cultivars respectively by using several sampling methods of net sweeping, black light traps, yellow water pan traps and visual counting. As the results, a total of 94 species belonging to 77 genera under 32 families are known to be injurious to barley, among them 20 species are newly added here. In the population density level, the dominant species were disclosed as Laodelphax striatellus (43.1 %), Macrosiphum avenae(27.0 %), Rhopalosiphum padi(6.5 %), R. maidis(5.4 %), Psammolettix strialus(2.7 %), Chlorops oryzae(2.2 %), Agromyza albipennis(2.1 %) Phyllotreta nemorum(1.4 %), Chaetoenema cylindrica(1.0 %), Dolycoris baccarum(1.0 %) in order. For the general abundance of major insect pests, it was highest in the cultivar P'aldal whereas lowest in Milyang #22. There were tendencies that Psammotettix striatus, Dolycoris baccarum, Phyllotreta nemorum and Chaetocnema cylindrica represented a maximum increase in the beginning of June, while Chlorops oryzae and Agromyza albipennis showed in the middle of May but aphids were in the end of May. In the dominance of natural enemies, Nabis stenoferus occupied 21.4 % and Propylaea japonica 9.6 %.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.400-409
• /
• 2015

This study examined the plant growth and development characteristics of leafy vegetables on the hydroponic substrates of waste wood chips, radiate pine chips, and mat type of waste wood chips. The bulk density of waste wood chips and radiata pine chips were $0.2g/cm^3$ and $0.16g/cm^3$, respectively. The moisture retention properties of both the radiata pine chips and waste wood chips were found to be similar but not better than those of the control rock wool and coco peat hydroponic substrates. The moisture retention property of the mat type was found to be the lowest. The chemical analysis of waste wood hydroponic substrates (w/v) was as follows.; The pH was 6.59, electric conductivity was 6.76 dS/m, total nitrogen content was 0.5%, C/N ratio was 113%, phosphorus was 10.1 ppm, potassium was 77 ppm, calcium was 531 ppm, magnesium was 49 ppm, and sodium was 96 ppm. The results from the radiata pine chemical analysis showed that it had a pH of 5.29, electric conductivity of 4.49 dS/m, total nitrogen content of 0.32%, C/N ratio of 180%, phosphorus of 6.4 ppm, potassium of 83 ppm, calcium of 97 ppm, magnesium of 29 ppm, and sodium of 59 ppm. Except for the plants grown in mat type, the developmental characteristics of the plants grown in rock wool and coco peat hydroponic substrates were similar. Based on the results of the experiment, waste wood resources may possibly be used as an organic solid medium in place of the existing rock wool and coco peat medium.

• Journal of Chest Surgery
• /
• v.41 no.6
• /
• pp.687-694
• /
• 2008

Background: Although aortic valve sclerosis causes no significant hemodynamic alterations, it is associated with an increased risk of cardiovascular death and myocardial infarction. However, the role of ${\beta}_3$ integrin in aortic valve sclerosis remains unclear. Material and Method: Twenty male New Zealand rabbits were divided into two groups. Group 1 rabbits (n=10) received a normal chow diet, while group 2 (n=10) rabbits received a diet containing 1% cholesterol for 12 weeks. After the rabbits were euthanized, their aortic valves and ascending aortas were excised for analysis. Result: Total serum cholesterol ($2,148.3{\pm}1,012.5\;mg/dL$ versus $53.7{\pm}31.8\;mg/dL$, p<0.05), triglyceride ($240.4{\pm}218.3\;mg/dL$ versus $31.6{\pm}6.4\;mg/dL$, p<0.05), and low density lipoprotein (LDL)-cholesterol($2,065.3{\pm}960.9\;mg/dL$ versus $29.1{\pm}30.9\;mg/dL$, p<0.05) levels were significantly higher in the cholesterol diet group compared with the normal diet group. Myofibroblasts and macrophages were more highly expressed in the aortic valve leaflets of rabbits in the cholesterol diet group than of those in the normal diet group. A real-time polymerase chain reaction revealed decreased ${\beta}_3$ integrin mRNA levels in the hypercholesterolemic aortic valves and aortas. Conclusion: The present study shows that hypercholesterolemia induces aortic valve sclerosis. These findings suggest that alterations in ${\beta}_3$ integrin may playa role in the development of aortic valve sclerosis.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.207-211
• /
• 1996

This study was conducted in the sandy loam soil to find out the effects of fly ash and zeolite applications on saving of irrigation water which was required great quantities during the cultivation days of dry seeded rice. Total water loss was reduced so rapidly in the early growth stage that n was the least in the 18th day after irrigation. After that day it was increasd due to the growth development and the rising temperature. In the daily mean of decreasing water level during the whole irrigation days, control was 47.7mm but the treatments of fly ash and zeolite were 31.8mm and 35.8mm respectively Amounts of the presumed irrigation water of fly ash and zeolite treatments were lower about 29.1% and 20.9%. respectively than that of control during the whole irrigation days These gaps between control and amendment treatments were greater in the early growth stage than in the late stage Hardness, bulk density and the ratio of solid phase in the soil after experiment were the highest in the fly ash treatment and those of control and zeolite treatments were showed the same trends each other. Amounts of water percoration of control and zeolite treatments in the soil were increased 8.2% and 2.6% respectively in comparision with those in the soil after amendment application, but that of fly ash treatment was decreased 42.5%, In contrast to the water percoration of control in the soil after experiment, those of fly ash and zeolite treatments were decreased 76% and 32%.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.2
• /
• pp.238-245
• /
• 1996

Vertical profiles of $^{210}Po\;and\;^{210}Pb$ were measured for the upper 100 m of water column at six stations in the middle region of the Korean East Sea during March 1993. The distribution patterns of these radionuclides with the water mass and controlling factors on their distributions were also discussed. $^{210}Pb$ activities were generally high at surface water and gradually decrease with depth. Vertical profiles of $^{210}Po$ were relatively homogeneous except for at station E3, where chlorophyll-a concentration was the highest and $^{210}Po$ activity in the upper 30 m was lower than below 50 m. The $^{210}Po$ activities relative to its parent $^{210}Pb$ at all stations were deficient at the upper 30 m, but were excess or nearly equilibrated values below 50 m. The magnitude of $^{210}Po$ deficiency was relatively high at station E3 and E6, where strong thermocline occured. However, $^{210}Pb$ activities showed strong excess in the upper 100 m of all stations, compared with its parent $^{226}Ra$. The residence time of $^{210}Po$ ranged from 1.0 to 7.8 years, and was relatively short at station E3 and E6. The data obtained at the upper 50 m water column during $1992\~1994$, also showed that removal rate constant of $^{210}Po$ and inventories of chlorophyll-a was negatively related. This indicates that the primary production plays an important role in controlling the distributions of $^{210}Po$ at the upper water column of the Korean last Sea in spring. While, inventories of excess $^{210}Pb$ was generally decreasing with increasing density difference between 50 m and 100 m, suggesting that $^{210}Pb$ concentrations in the upper water column were controlled by stability of water column.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2009

In the past decade, we have observed rapid advances in the development of biochips in many fields including medical and environmental monitoring. Biochip experiments involve immobilizing a ligand on a solid substrate surface, and monitoring its interaction with an analyte in a sample solution. Metal nanoparticles can display extinction bands on their surfaces. These charge density oscillations are simply known as the localized surface plasmon resonance (LSPR). The high sensitivity of LSPR has been utilized to design biochips for the label-free detection of biomolecular interactions with various ligands. LSPR-based optical biochips and biosensors are easy to fabricate, and the apparatus cost for the evaluation of optical characteristics is lower than that for the conventional surface plasmon resonance apparatus. Furthermore, the operation procedure has become more convenient as it does not require labeling procedure. In this paper, we review the recent advances in LSPR research and also describe the LSPR-based optical biosensor constructed with a core-shell dielectric nanoparticle biochip for its application to label-free biomolecular detections such as antigen-antibody interaction.

• Korean journal of applied entomology
• /
• v.59 no.1
• /
• pp.25-35
• /
• 2020

The striped fruit fly, Zeugodacus scutellata, is endemic in Korea, but it has been regarded as one of the serious quarantine pests throughout the world. Sterile insect release technique (SIT) has been used to eradicate quarantine fruit flies. This study developed a technique to generate sterile males and applied SIT to control Z. scutellata. First of all, the reproductive systems of Z. scutellata adults were examined with fluorescent microscope. Polytrophic ovaries comprises of around 100 follicles with developing oocytes. Each follicle contains an oocyte with several nurse cells and are surrounded with follicular epithelium. Oocyte development began at 10 days after adult emergence (DAE) and formed chorionated oocytes after 20 DAE. On the other hand, male testes were well developed just after adult emergence. The vas deferens was filled with motile sperms. To generate sterile males, different doses (0~1,000 Gy) doses of electron beam were irradiated to 3~5 days old pupae of Z. scutellata. When male pupae were irradiated with electron beam at 200 Gy, they developed and mated with females without any significant difference compared to untreated males. Although the untreated females mated with the 200 Gy-irradiated males laid eggs, no eggs did not hatch. The 200 Gy-irradiated males were then applied to untreated male and female flies in a density ratio of 1:9 (untreated males : treated males). The laid eggs suffered significant infertility. These results suggest that electron beam-irradiated pupae at 200 Gy resulted in male sterility and the resulting males would be applied to SIT.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.9-15
• /
• 2010

This study was conducted to develop a stand growth model and a stand yield table for Eucalyptus pellita and Acacia mangium plantations in Kalimantan, Indonesia. To develop a stand growth model, Weibull robability density function, a diameter class model, was applied in this study. In the development of stand growth model by site index and stand age, a hierarchy is generally required - estimation, recovery and prediction of the diameter class model. A number of grow equations were also involved in each process to estimate diameter, height, basal area, minimum or maximum diameter. To examine whether the grow equations are adequate for Eucalyptus pellita or Acacia mangium plantations, a fitness index was analyzed for each equation. The results showed that fitness indices were ranged from 65 to 89% for Eucalyptus pellita plantations and from 72 to 95% for Acacia mangium plantations. As being highly adequate for the plantations, a stand yield table was developed based on the resulted growth model, and applied to estimate the stand growth with midium site index for 10-year period. The highest annual stand growth of Eucalyptus pellita plantations was estimated to be 21.25 $m^3$/ha, while that of Acacia mangium plantations was 27.5 $m^3$/ha. In terms of annual stand growth, Acacia mangium plantations appeared to be more beneficial than Eucalyptus pellita plantations. Also, to estimate commercial timber volume available from the plantations, an assumption that a log would be cut by 2.7 m in length and the rest of the log would be cut by 1.5m was involved. The commercial timber volume available from Eucalyptus pellita plantations was 68.0 $m^3$/ha, 33% from the total stand volume, 203.2 $m^3$/ha. Also 96.7 $m^3$/ha of commercial timbers were available from Acacia mangium plantations, which was 42% from the 232.9 $m^3$/ha in total. Presenting a good information about the stand growth in Eucalyptus pellita and Acacia mangium plantations, this study might be useful for whom proceeds or considers an abroad plantation for merchantable timber production or carbon credit in tropical regions.

• Journal of dental hygiene science
• /
• v.15 no.4
• /
• pp.445-456
• /
• 2015

The aim of this study was to identify an effective control method of metabolic syndrome (MS) and oral diseases by investigating relationship between of MS and periodontal disease, tooth loss of the adult men and woman. We analyzed and concluded as follows, using a nationwide representative sample, in 8,225 middle senior citizens based on raw data of the 5th National Nutrition Survey in 2010, 2012. The data were analyzed by descriptive statistics, chi-squared test, and logistic regression using SAS ver. 9.2 program. The results are as follows, for correlation of metabolic component to periodontal disease, it was found that in men, the periodontal disease odds ratio of the group with abnormal fasting blood glucose increased 1.27 fold (95% confidence interval [CI], 1.04~1.54), and in woman, the odds ratios of the group with abnormal high density lipoprotein cholesterol increased 1.45 fold (95% CI, 1.22~1.72) and the odds ratio of the group with abnormal obesity increased 1.44 fold (95% CI, 1.17~1.77). For correlation of MS to periodontal disease, it was found that the odds ratio of periodontal disease in the woman at-risk group increased 1.55 fold (95% CI, 1.19~2.01) and that of the group with MS increased 2.25 fold (95% CI, 1.68~3.02). For correlation of woman's metabolic component to missing teeth, it was found that the odds ratio of group with abnormal blood pressure increased 1.41 fold (95% CI, 1.10~1.82). For correlation of woman's MS to missing teeth, it was found that the odds ratio of missing teeth in the group with MS increased 1.48 fold (95% CI, 1.07~2.04). It is considered that a public health project comprising preventive and systematic disease management is necessary for controlling MS and oral disease. The findings of the study are expected to lay the foundation for the development of oral health promotion programs.