• 제목/요약/키워드: Detection accuracy

검색결과 3,981건 처리시간 0.03초

농업용 저수지 모니터링을 위한 다해상도 SAR 영상의 활용 (Multi-resolution SAR Image-based Agricultural Reservoir Monitoring)

  • 이슬찬;정재환;오승철;정하규;최민하
    • 대한원격탐사학회지
    • /
    • 제38권5_1호
    • /
    • pp.497-510
    • /
    • 2022
  • 농업용 저수지는 수자원이 계절적으로 편중된 한반도에서 갈수기 용수 공급을 위한 필수적인 구조물이다. 효율적인 물 관리를 위해서는 중소규모 저수지에 대한 체계적이고 효과적인 모니터링이 필요하며, 합성개구 레이더(Synthetic Aperture Radar, SAR) 영상은 전천후 관측이 가능하다는 특징과 함께 연속적인 저수지 모니터링을 위한 도구가 된다. 본 연구에서는 10 m급 해상도를 갖는 Sentinel-1 SAR 영상과 1 m급 해상도의 Capella X-SAR 영상을 활용하여 울산광역시 차리, 갈전, 뒷골 저수지의 수체를 탐지하였으며, 이를 통해 국내 중소규모 저수지 모니터링에의 활용성을 평가하고자 하였다. Z fuzzy function 기반 임계값 산정을 통한 영상분할기법과 객체 탐지 기반 분할기법인 Chan-vese (CV) 기법을 통해 수체 영역을 산정하였으며, UAV 영상과의 비교를 통해 성능을 정량적으로 평가하였다. 임계값 기반 탐지 정확도는 Sentinel-1의 경우 약 0.87, 0.89, 0.77 (차리, 갈전, 뒷골), Capella의 경우 약 0.78, 0.72, 0.81로 나타났으며, CV 기법 적용 시 모든 저수지에서 정확도가 향상되는 것을 확인하였다(Sentinel-1: 0.94, 0.89, 0.84, Capella: 0.92, 0.89, 0.93). Capella는 모든 저수지/분할기법에 대해 수체와 비수체의 경계를 비교적 뚜렷하게 모의하였으나, 고해상도로 인한 speckle noise가 충분히 평활화되지 않아 오탐지 및 미탐지가 다소 발생하였다. 오탐지의 제거를 위해 광학 센서 기반 보조자료를 활용하여 마스킹한 결과, 정확도가 최대 13% 향상되는 것을 확인할 수 있었다. 본 연구 결과를 바탕으로 SAR 위성 기반 더욱 정확한 저수지 탐지가 이루어진다면 소규모 저수지를 포함, 종합적인 가용수량에 대한 연속적인 모니터링이 가능할 것이며, 효과적인 수자원 관리에 기여할 수 있을 것으로 기대된다.

랜드마크 코너 추출을 적용한 모바일 카메라 기반 위치결정 기법 (Mobile Camera-Based Positioning Method by Applying Landmark Corner Extraction)

  • 이유진;윤완상;이수암
    • 대한원격탐사학회지
    • /
    • 제39권6_1호
    • /
    • pp.1309-1320
    • /
    • 2023
  • 모바일 기기의 기술 발전과 대중화는 어디서든 사용자의 위치를 확인할 수 있으며 인터넷을 사용할 수 있도록 발전되었다. 그러나 실내의 경우 인터넷은 끊김없이 사용할 수 있지만 global positioning system (GPS) 기능은 활용하기 어렵다. 실내 공공장소인 백화점, 박물관, 컨퍼런스장, 학교, 터널 등 GPS가 수신되지 않는 음영 지역에서 실시간 위치정보 제공의 필요성이 증가하고 있다. 이에 따라 최근의 실내 측위 기술은 랜드마크 데이터베이스를 구축하기 위해 light detection and ranging (LiDAR) 장비를 기반으로 연구가 증가하고 있다. 본 연구에서는 랜드마크 데이터베이스 구축의 접근성에 초점을 두어 모바일 기기를 기반으로 랜드마크를 촬영한 단일 이미지와 사전에 구축된 랜드마크 데이터베이스 정보를 이용하여 사용자의 위치를 추정하는 기법을 개발하고자 하였다. 첫 번째로, 랜드마크 데이터베이스를 구축하였다. 랜드마크를 촬영한 모바일 이미지만으로 사용자 위치를 추정하기 위해서는 모바일 이미지에서 랜드마크 검출이 필수적이고, 검출된 랜드마크에서 고정적인 성격을 가진 지점의 지상좌표 취득이 필수적이다. 두 번째 단계에서는 bag of words (BoW) 영상 검색 기술을 적용해 랜드마크 데이터베이스 중 모바일 이미지가 촬영한 랜드마크를 유사한 4위까지 검색하였다. 세 번째 단계에서는 scale invariant feature transform (SIFT) 특징점 추출 기법과 Homography random sample consensus (RANSAC)을 통해 검색된 4개의 후보 랜드마크들 중 가장 유사한 하나의 랜드마크를 선정하였고, 이때 임계값 설정을 통해 정합점 수를 기반으로 한 차례 더 필터링을 수행하였다. 네 번째 단계에서는 대응된 랜드마크와 모바일 이미지간의 Homography 행렬을 통해 랜드마크 이미지를 모바일 이미지에 투사하여 랜드마크의 영역과 코너(외곽선)점을 검출하였다. 마지막으로, 위치추정 기법을 통해 사용자의 위치를 추정하였다. 해당 기술의 성능을 분석한 결과, 랜드마크 검색 성능은 약 86%로 측정되었다. 위치추정 결과와 사용자의 실제 지상좌표를 비교한 결과, 약 0.56 m의 수평 위치 정확도를 갖는 것이 확인되어 별도의 고가 장비 없이 랜드마크 데이터베이스를 구축하여 모바일 영상으로 사용자 위치 추정이 가능한 것을 확인하였다.

GOCI-II 영상 기반 Random Forest 모델을 이용한 해빙 모니터링 적용 가능성 평가: 2021-2022년 랴오둥만을 대상으로 (Evaluation of Applicability of Sea Ice Monitoring Using Random Forest Model Based on GOCI-II Images: A Study of Liaodong Bay 2021-2022)

  • 김진영;장소영;권재엽;김태호
    • 대한원격탐사학회지
    • /
    • 제39권6_2호
    • /
    • pp.1651-1669
    • /
    • 2023
  • 해빙(sea ice)은 현재 전 세계 해양 면적의 약 7%를 차지하고 있으며 계절적, 연간 변화를 보이고 주로 극지방과 고위도 지역에 나타난다. 해빙은 대규모 공간 규모에서 다양한 종류로 형성되며 석유 및 가스탐사, 기타 해양활동이 급속히 증가하는 발해해는 해양 구조물 피해 및 해상 운송, 해양 생태계에 심각한 영향을 미치기 때문에 시계열 모니터링을 통해 해빙의 면적 및 유형 분류를 분석하는 것이 매우 중요하다. 현재 고해상도 위성영상 및 현장 실측 자료를 바탕으로 해빙의 종류 및 영역에 대한 연구가 진행되고 있지만 현장 실측자료를 획득하여 해빙 모니터링에는 한계가 있다. 고해상도 광학 위성영상은 광범위에서 해빙의 유형을 육안으로 탐지하고 식별할 수 있고, 짧은 시간해상도를 갖는 해양위성인 천리안 2B호(Geostationary Ocean Color Imager-II, GOCI-II)를 이용하여 해빙 모니터링의 공백을 보완할 수 있다. 이 연구에서는 고해상도 광학위성영상을 이용하여 생산된 학습자료를 기반으로 규칙기반 기계학습 모델을 훈련시키고 이를 GOCI-II 영상에서 탐지를 수행함으로써, 해빙 모니터링 활용 가능성을 알아보고자 하였다. 학습 자료는 발해(Bohai Sea)의 2021-2022년 랴오둥만(Liaodong Bay)을 대상으로 추출하였으며, GOCI-II를 활용한 Random Forest (RF) 모델을 구축하여 기존 normalized difference snow index (NDSI) 지수 기반 및 고해상도 위성영상에서 획득된 해빙 영역과 정성적 및 정량적 비교 분석하였다. 본 연구 결과 해빙의 영역을 과소평가한 NDSI 지수 기반 결과와 달리 비교적 자세한 해빙 영역을 탐지하였으며 유형별 해빙을 분류할 수 있어 해빙 모니터링이 가능함을 확인하였다. 향후 지속적인 학습 자료 및 해빙형성에 영향인자 구축을 통해 탐지 모델의 정확도를 향상시킨다면 고위도 해양 지역에서 해빙 모니터링 분야에 활용할 수 있을 것으로 기대된다.

건강기능식품에서 HPLC-UVD를 이용한 자일로올리고당 시험법의 표준화 연구 (Studies on Xylooligosaccharide Analysis Method Standardization using HPLC-UVD in Health Functional Food)

  • 이세윤;정희선;김규헌;이미영;최정호;안정선;권광일;이혜영
    • 한국식품위생안전성학회지
    • /
    • 제39권2호
    • /
    • pp.72-82
    • /
    • 2024
  • 본 연구는 자일로올리고당의 과학적이고 체계적인 표준화된 시험법을 마련하여 다양한 제형의 제품에 적용하고자 하였다. 최적화된 시험법을 마련하기 위해 초음파 처리 시간, 산 가수분해 시간 및 농도를 검토하여 전처리 방법을 비교 평가하였으며, HPLC-UVD를 이용하여 시료 중의 자일로올리고당을 분석하였다. 분석 시 1-phenyl-3-methyl-5-pyrazoline (PMP)으로 유도체화하고, photo diode array (PDA)가 장착된 high performance liquid chromatography (HPLC) (Nanospace SI-2)를 사용하였으며, 칼럼은 Cadenza C18 (4.6 × 250 mm, 3 ㎛)이었으며, 이동상은 pH를 6.0으로 맞춘 20 mM 인산완충용액과 아세토니트릴을 78:22 비율로 혼합하여 사용하였고, 0.5 mL/min 유속으로 254 nm로 하여 분석하였다. 건강기능식품 등 시험법 마련 표준절차에 관한 가이드라인에 따라 밸리데이션을 수행하고, 표준화된 시험법을 이용하여 유통 중인 건강기능식품 대상 품목에 대해 시험법 적용 여부를 확인하였다. 표준화된 시험법은 자일로올리고당을 함유한 건강기능식품 품질관리에 대한 신뢰성을 더 높일 것으로 본다.

유방암 수술 후 액와림프절 재발 진단에 있어서의 미세침세척액 CYFRA 21-1의 진단적 가치 (Diagnostic Value of CYFRA 21-1 Measurement in Fine-Needle Aspiration Washouts for Detection of Axillary Recurrence in Postoperative Breast Cancer Patients)

  • 원소연;김은경;문희정;윤정현;박영진;김민정
    • 대한영상의학회지
    • /
    • 제81권1호
    • /
    • pp.147-156
    • /
    • 2020
  • 목적 이 연구의 목적은 유방암으로 수술한 환자에서 림프절 재발을 진단함에 있어 미세침흡인세척액 cytokeratin fragment 21-1 (이하 CYFRA 21-1) 측정의 진단적 가치와 적절한 역치값을 평가하는 것이다. 대상과 방법 64명의 유방암 수술을 받은 환자에서 재발이 의심되는 총 64개의 림프절에 대해 미세침흡인세포검사와 미세침세척액 CYFRA 21-1 검사를 시행하였다. 최종 진단은 fine-needle aspiration 세포검사 및 2년 이상의 추적관찰로 하였다. 재발 림프절과 양성 림프절의 CYFRA 21-1의 농도를 비교하였다. 진단수행도와 역치값은 수신기작동특성곡선을 이용하여 구했다. 결과 비진단적 결과와 상관없이, CYFRA 21-1의 중간 농도는 양성 림프절보다 재발 림프절에서 유의하게 높았다(p < 0.001). 적절한 역치값은 1.6 ng/mL였다. 림프절 재발에 대한 CYFRA 21-1의 민감도, 특이도, 양성예측도, 음성예측도 및 정확도는 각각 90.9%, 100%, 100%, 98.1%, 98.4%였다. 결론 미세침세척액에서 CYFRA 21-1 농도 측정은 역치값을 1.6으로 하였을 때 우수한 진단수 행도를 보여주었다. 이 결과는 미세침세척액 CYFRA 21-1 농도 측정이 유방암 수술 환자에서 액와림프절 재발을 진단하는데 있어 유용함을 보여준다.

온보드 영상장치(On-Board Imager) 및 콘빔CT(CBCT)를 이용한 환자 자세 검증의 유용성에 대한 연구 (A Study on the Availability of the On-Board Imager(OBI) and Cone-Beam CT(CBCT) in the Verification of Patient Set-up)

  • 박진호;박성호;박석원
    • Radiation Oncology Journal
    • /
    • 제26권2호
    • /
    • pp.118-125
    • /
    • 2008
  • 목적: 온보드 영상장치(On-Board Imager, OBI) 및 콘빔CT(Cone Beam Computerized Tomography, CBCT)를 이용하면 치료실에 위치한 환자의 자세 및 위치와 모의치료 시점의 환자의 자세 및 위치를 비교할 수 있다. 온라인 영상유도방사선치료(on-line Image Guided Radiation Therapy, on-line IGRT)에서는 이러한 정보를 이용하여 방사선 치료 직전에 환자의 위치를 확인하고 보정한다. 이때 모의치료 시 획득한 영상과 치료실에서 실시간 얻은 kV X선 영상 또는 콘빔CT 영상을 이용하여 2차원/2차원 맞춤(2D/2D Match) 또는 3차원/3차원 맞춤(3D/3D Match)의 이미지 퓨젼 프로그램을 사용하여 그 편차를 산출한다. 이 과정에서 주어지는 편차가 환자 자세에 대한 오차를 정확히 반영하고 있는지에 대해 알아보고자 한다. 대상 및 방법: 신체 내부 구조가 모사된 팬톰(The $RANDO^{(R)}$ Phantom, Alderson Research Laboratories Inc., Stamford, CT, USA)을 사용하여 실제 방사선 치료와 동일한 과정을 따라 모의치료 및 치료계획을 시행한 후 치료 테이블 위에 팬톰을 셋업한다. 그리고 모의치료 시 표시된 팬톰의 표면 지점에 치료실의 레이저에 일치시킨다. 이때, CT 모의치료실과 가속기가 있는 치료실의 벽면 고정 레이저에 대한 정렬의 일치만 확인하면, 치료테이블에 놓여진 팬톰의 위치는 모의치료 시 위치와 정확히 일치한다. 실제로는 팬톰 표면에 나타나는 레이저 선의 두께 정도되는 오차를 무시한다면, 두 시점에서 팬톰의 위치가 정확히 같다고 말할 수 있다. 정확히 위치가 재현되었다고 가정되는 팬톰에 대해 평행이동 또는 회전이동의 변화를 만들어 준 후, 위치가 옮겨지고 틀어진 팬톰에 대해 온보드 영상장치로부터 kV X선 영상을 그리고 콘빔CT로부터 CT 영상을 얻는다. kV X선 영상과 모의치료 시 획득한 CT영상을 이용하여 OBI 프로그램에서 제공되는 2차원/2차원 맞춤의 결과를 얻는다. 그리고 콘빔CT 영상과 모의치료 시 획득한 CT영상을 가지고 이미지 퓨젼 과정을 거쳐 3차원/3차원 맞춤의 결과를 얻는다. 이렇게 얻은 2차원/2차원 맞춤 및 3차원/3차원 맞춤의 결과와 처음에 팬톰에 인위적으로 만들어준 위치 변화를 비교한다. 결과: 온보드 영상장치로 획득한 kV X선 영상과 모의치료 시 영상을 비교하는 2차원/2차원 맞춤에서는 팬톰의 위치에 회전이동만 존재한다고 가정했을 때에는 평균 $0.06^{\circ}$의 오차 내에서 모의치료 시 팬톰의 위치에 대한 편차를 찾을 수 있었다. 또한 평행이동만 존재한다고 가정했을 때에는 편차 벡터의 크기가 평균 1.8 mm였다. 그리고 회전이동과 평행이동이 동시에 존재하는 일반적인 경우에는 편차 벡터의 크기는 평균 2.1 mm, 테이블 회전 방향으로 평균 $0.3^{\circ}$의 오차 내에서 모의치료 시 팬톰의 위치를 찾을 수 있었다. 콘빔CT로 획득한 영상을 이용하는 3차원/3차원 맞춤의 과정에서 팬톰의 위치가 회전이동만 존재할 때에는 평균 $0.03^{\circ}$의 오차 내에서, 평행이동만 있는 경우는 편차 벡터의 크기의 평균이 0.16 mm 내에서, 틀어지고 이동된 팬톰의 위치를 찾을 수 있었다. 그리고 회전이동과 평행이동이 동시에 존재하는 일반적인 경우에는 편차 벡터의 크기는 1.5 mm, 테이블 회전 방향으로 평균 $0^{\circ}$의 오차 내에서, 모의치료 시 팬톰의 위치와 맞출 수 있었다. 결론: 온보드 영상장치와 콘빔CT를 이용한 영상유도방사선치료(on-line IGRT)에서 모의치료 시 팬톰의 위치는 가속기의 치료테이블 위에서 매우 정확히 재현되어졌다. 온보드 영상장치는 kV X선 영상을 이용하여 간단하게 위치의 검증과 보정을 할 수 있었고, 콘빔CT를 이용하는 경우에는 2차원적인 정면 또는 측면 영상이 아니라, 3차원 영상을 비교함으로서 더욱 정확한 위치보정이 가능하였다.

APPLICATION OF FUZZY SET THEORY IN SAFEGUARDS

  • Fattah, A.;Nishiwaki, Y.
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
    • /
    • pp.1051-1054
    • /
    • 1993
  • The International Atomic Energy Agency's Statute in Article III.A.5 allows it“to establish and administer safeguards designed to ensure that special fissionable and other materials, services, equipment, facilities and information made available by the Agency or at its request or under its supervision or control are not used in such a way as to further any military purpose; and to apply safeguards, at the request of the parties, to any bilateral or multilateral arrangement, or at the request of a State, to any of that State's activities in the field of atomic energy”. Safeguards are essentially a technical means of verifying the fulfilment of political obligations undertaken by States and given a legal force in international agreements relating to the peaceful uses of nuclear energy. The main political objectives are: to assure the international community that States are complying with their non-proliferation and other peaceful undertakings; and to deter (a) the diversion of afeguarded nuclear materials to the production of nuclear explosives or for military purposes and (b) the misuse of safeguarded facilities with the aim of producing unsafeguarded nuclear material. It is clear that no international safeguards system can physically prevent diversion. The IAEA safeguards system is basically a verification measure designed to provide assurance in those cases in which diversion has not occurred. Verification is accomplished by two basic means: material accountancy and containment and surveillance measures. Nuclear material accountancy is the fundamental IAEA safeguards mechanism, while containment and surveillance serve as important complementary measures. Material accountancy refers to a collection of measurements and other determinations which enable the State and the Agency to maintain a current picture of the location and movement of nuclear material into and out of material balance areas, i. e. areas where all material entering or leaving is measurab e. A containment measure is one that is designed by taking advantage of structural characteristics, such as containers, tanks or pipes, etc. To establish the physical integrity of an area or item by preventing the undetected movement of nuclear material or equipment. Such measures involve the application of tamper-indicating or surveillance devices. Surveillance refers to both human and instrumental observation aimed at indicating the movement of nuclear material. The verification process consists of three over-lapping elements: (a) Provision by the State of information such as - design information describing nuclear installations; - accounting reports listing nuclear material inventories, receipts and shipments; - documents amplifying and clarifying reports, as applicable; - notification of international transfers of nuclear material. (b) Collection by the IAEA of information through inspection activities such as - verification of design information - examination of records and repo ts - measurement of nuclear material - examination of containment and surveillance measures - follow-up activities in case of unusual findings. (c) Evaluation of the information provided by the State and of that collected by inspectors to determine the completeness, accuracy and validity of the information provided by the State and to resolve any anomalies and discrepancies. To design an effective verification system, one must identify possible ways and means by which nuclear material could be diverted from peaceful uses, including means to conceal such diversions. These theoretical ways and means, which have become known as diversion strategies, are used as one of the basic inputs for the development of safeguards procedures, equipment and instrumentation. For analysis of implementation strategy purposes, it is assumed that non-compliance cannot be excluded a priori and that consequently there is a low but non-zero probability that a diversion could be attempted in all safeguards ituations. An important element of diversion strategies is the identification of various possible diversion paths; the amount, type and location of nuclear material involved, the physical route and conversion of the material that may take place, rate of removal and concealment methods, as appropriate. With regard to the physical route and conversion of nuclear material the following main categories may be considered: - unreported removal of nuclear material from an installation or during transit - unreported introduction of nuclear material into an installation - unreported transfer of nuclear material from one material balance area to another - unreported production of nuclear material, e. g. enrichment of uranium or production of plutonium - undeclared uses of the material within the installation. With respect to the amount of nuclear material that might be diverted in a given time (the diversion rate), the continuum between the following two limiting cases is cons dered: - one significant quantity or more in a short time, often known as abrupt diversion; and - one significant quantity or more per year, for example, by accumulation of smaller amounts each time to add up to a significant quantity over a period of one year, often called protracted diversion. Concealment methods may include: - restriction of access of inspectors - falsification of records, reports and other material balance areas - replacement of nuclear material, e. g. use of dummy objects - falsification of measurements or of their evaluation - interference with IAEA installed equipment.As a result of diversion and its concealment or other actions, anomalies will occur. All reasonable diversion routes, scenarios/strategies and concealment methods have to be taken into account in designing safeguards implementation strategies so as to provide sufficient opportunities for the IAEA to observe such anomalies. The safeguards approach for each facility will make a different use of these procedures, equipment and instrumentation according to the various diversion strategies which could be applicable to that facility and according to the detection and inspection goals which are applied. Postulated pathways sets of scenarios comprise those elements of diversion strategies which might be carried out at a facility or across a State's fuel cycle with declared or undeclared activities. All such factors, however, contain a degree of fuzziness that need a human judgment to make the ultimate conclusion that all material is being used for peaceful purposes. Safeguards has been traditionally based on verification of declared material and facilities using material accountancy as a fundamental measure. The strength of material accountancy is based on the fact that it allows to detect any diversion independent of the diversion route taken. Material accountancy detects a diversion after it actually happened and thus is powerless to physically prevent it and can only deter by the risk of early detection any contemplation by State authorities to carry out a diversion. Recently the IAEA has been faced with new challenges. To deal with these, various measures are being reconsidered to strengthen the safeguards system such as enhanced assessment of the completeness of the State's initial declaration of nuclear material and installations under its jurisdiction enhanced monitoring and analysis of open information and analysis of open information that may indicate inconsistencies with the State's safeguards obligations. Precise information vital for such enhanced assessments and analyses is normally not available or, if available, difficult and expensive collection of information would be necessary. Above all, realistic appraisal of truth needs sound human judgment.

  • PDF

Hierarchical Attention Network를 이용한 복합 장애 발생 예측 시스템 개발 (Development of a complex failure prediction system using Hierarchical Attention Network)

  • 박영찬;안상준;김민태;김우주
    • 지능정보연구
    • /
    • 제26권4호
    • /
    • pp.127-148
    • /
    • 2020
  • 데이터 센터는 컴퓨터 시스템과 관련 구성요소를 수용하기 위한 물리적 환경시설로, 빅데이터, 인공지능 스마트 공장, 웨어러블, 스마트 홈 등 차세대 핵심 산업의 필수 기반기술이다. 특히, 클라우드 컴퓨팅의 성장으로 데이터 센터 인프라의 비례적 확장은 불가피하다. 이러한 데이터 센터 설비의 상태를 모니터링하는 것은 시스템을 유지, 관리하고 장애를 예방하기 위한 방법이다. 설비를 구성하는 일부 요소에 장애가 발생하는 경우 해당 장비뿐 아니라 연결된 다른 장비에도 영향을 미칠 수 있으며, 막대한 손해를 초래할 수 있다. 특히, IT 시설은 상호의존성에 의해 불규칙하고 원인을 알기 어렵다. 데이터 센터 내 장애를 예측하는 선행연구에서는, 장치들이 혼재된 상황임을 가정하지 않고 단일 서버를 단일 상태로 보고 장애를 예측했다. 이에 본 연구에서는, 서버 내부에서 발생하는 장애(Outage A)와 서버 외부에서 발생하는 장애(Outage B)로 데이터 센터 장애를 구분하고, 서버 내에서 발생하는 복합적인 장애 분석에 중점을 두었다. 서버 외부 장애는 전력, 냉각, 사용자 실수 등인데, 이와 같은 장애는 데이터 센터 설비 구축 초기 단계에서 예방이 가능했기 때문에 다양한 솔루션이 개발되고 있는 상황이다. 반면 서버 내 발생하는 장애는 원인 규명이 어려워 아직까지 적절한 예방이 이뤄지지 못하고 있다. 특히 서버 장애가 단일적으로 발생하지 않고, 다른 서버 장애의 원인이 되기도 하고, 다른 서버부터 장애의 원인이 되는 무언가를 받기도 하는 이유다. 즉, 기존 연구들은 서버들 간 영향을 주지 않는 단일 서버인 상태로 가정하고 장애를 분석했다면, 본 연구에서는 서버들 간 영향을 준다고 가정하고 장애 발생 상태를 분석했다. 데이터 센터 내 복합 장애 상황을 정의하기 위해, 데이터 센터 내 존재하는 각 장비별로 장애가 발생한 장애 이력 데이터를 활용했다. 본 연구에서 고려되는 장애는 Network Node Down, Server Down, Windows Activation Services Down, Database Management System Service Down으로 크게 4가지이다. 각 장비별로 발생되는 장애들을 시간 순으로 정렬하고, 특정 장비에서 장애가 발생하였을 때, 발생 시점으로부터 5분 내 특정 장비에서 장애가 발생하였다면 이를 동시에 장애가 발생하였다고 정의하였다. 이렇게 동시에 장애가 발생한 장비들에 대해서 Sequence를 구성한 후, 구성한 Sequence 내에서 동시에 자주 발생하는 장비 5개를 선정하였고, 선정된 장비들이 동시에 장애가 발생된 경우를 시각화를 통해 확인하였다. 장애 분석을 위해 수집된 서버 리소스 정보는 시계열 단위이며 흐름성을 가진다는 점에서 이전 상태를 통해 다음 상태를 예측할 수 있는 딥러닝 알고리즘인 LSTM(Long Short-term Memory)을 사용했다. 또한 단일 서버와 달리 복합장애는 서버별로 장애 발생에 끼치는 수준이 다르다는 점을 감안하여 Hierarchical Attention Network 딥러닝 모델 구조를 활용했다. 본 알고리즘은 장애에 끼치는 영향이 클 수록 해당 서버에 가중치를 주어 예측 정확도를 높이는 방법이다. 연구는 장애유형을 정의하고 분석 대상을 선정하는 것으로 시작하여, 첫 번째 실험에서는 동일한 수집 데이터에 대해 단일 서버 상태와 복합 서버 상태로 가정하고 비교분석하였다. 두 번째 실험은 서버의 임계치를 각각 최적화 하여 복합 서버 상태일 때의 예측 정확도를 향상시켰다. 단일 서버와 다중 서버로 각각 가정한 첫 번째 실험에서 단일 서버로 가정한 경우 실제 장애가 발생했음에도 불구하고 5개 서버 중 3개의 서버에서는 장애가 발생하지 않은것으로 예측했다. 그러나 다중 서버로 가정했을때에는 5개 서버 모두 장애가 발생한 것으로 예측했다. 실험 결과 서버 간 영향이 있을 것이라고 추측한 가설이 입증된 것이다. 연구결과 단일 서버로 가정했을 때 보다 다중 서버로 가정했을 때 예측 성능이 우수함을 확인했다. 특히 서버별 영향이 다를것으로 가정하고 Hierarchical Attention Network 알고리즘을 적용한 것이 분석 효과를 향상시키는 역할을 했다. 또한 각 서버마다 다른 임계치를 적용함으로써 예측 정확도를 향상시킬 수 있었다. 본 연구는 원인 규명이 어려운 장애를 과거 데이터를 통해 예측 가능하게 함을 보였고, 데이터 센터의 서버 내에서 발생하는 장애를 예측할 수 있는 모델을 제시했다. 본 연구결과를 활용하여 장애 발생을 사전에 방지할 수 있을 것으로 기대된다.

하악골 매식 부위 계측을 위한 나선형 단층촬영술의 신뢰도 (RELIABILITY OF SPIRAL TOMOGRAPHY FOR IMPLANT SITE MEASUREMENT OF THE MANDIBLE)

  • 김기덕;박창서
    • 치과방사선
    • /
    • 제27권2호
    • /
    • pp.27-47
    • /
    • 1997
  • The purpose of this study was to evaluate the accuracy and usefulness of spiral tomography through the comparison and analysis of SCANORA cross-sectional tomographs and DentaScan computed tomographic images of dry mandibles taken by a SCANORA spiral tomographic machine and a computed tomographic machine. Thirty-one dry mandibles with full or partial edentulous areas were used. To evaluate the possible effect of location in the edentulous area, it was divided into 4 regions of Me (region of mental foramen), MI (the midportion between Me and M2), M2 (the midportion between mental foramen and mandibular foramen) and S (the midportion of the mandibular symphysis). A ZPC column (sized 4 mm x 5 mm) was seated on the edentulous regions of Me, MI, M2 and S using the acrylic stent. Then SCANORA spiral tomography and computed tomography were taken on the edentulous regions which contained the ZPC column. The ZPC columns and cross-sectional images of the mandible were measured in the radiographs by three observers and the differences between the two imaging modalities were analysed. The results were as follows: 1. In comparing the actual measurements of the ZPC column and measurements in the radiographs, the mean error of the DentaScan computed tomography was 0.07 mm in vertical direction and -0.06 mm in horiwntal direction, while the mean error of the SCANORA spiral tomography was 0.06 mm in vertical direction and -0.12 mm in horizontal direction. There was a significant difference between the two radiographic techniques in the horizontal measurement of the ZPC column of the symphysis region (p<0.05). But there was no significant difference in the measurements of other regions (p>0.05). 2. In measurements of the distance from the alveolar crest to the inferior border of the mandible (H), and of the distance from the alveolar crest to the superior border of the mandibular canal (Y), there was no significant difference between the two radiographic techniques (p>0.05). 3. In measurements of the distance from the lingual border of the mandible to the buccal border of the mandible (W), and of the distance from the lingual border of the mandible to the lingual border of the mandibular canal (X), there was a significant difference between the two radiographic techniques in measurements of the midportion between the mental foramen and the mandibular foramen (M2) (p<0.05). But there were no significant differences in measurements of the other regions of symphysis (S), mental foramen (Me), the first one-fourth portion between the mental foramen and the mandibular foramen (M1) (p>0.05). 4. Considering the mean range of measurements between observers, the measurements of SCANORA spiral tomography showed higher value than those of DentaScan computed tomography, except in measurements of symphysis (S). 5. On the detectability of the mandibular canal, there was no significant difference between the two radiographic techniques (p>0.05). In conclusion, SCANORA spiral tomography demonstrated a higher interobserver variance than that of DentaScan computed tomography for implant site measurements in the posterior edentulous area of the mandible. These differences were mainly the result of difficulty in the detection of the border of the mandible in SCANORA spiral tomography. But considering the cost and the radiation exposure, SCANORA spiral tomography can be said to be a relatively good radiographic technique for implant site measurement.

  • PDF

중국군의 해양작전능력과 한국군의 과제 (PRC Maritime Operational Capability and the Task for the ROK Military)

  • 김민석
    • Strategy21
    • /
    • 통권33호
    • /
    • pp.65-112
    • /
    • 2014
  • Recent trends show that the PRC has stepped aside its "army-centered approach" and placed greater emphasis on its Navy and Air Force for a wider range of operations, thereby reducing its ground force and harnessing its economic power and military technology into naval development. A quantitative growth of the PLA Navy itself is no surprise as this is not a recent phenomenon. Now is the time to pay closer attention to the level of PRC naval force's performance and the extent of its warfighting capacity in the maritime domain. It is also worth asking what China can do with its widening naval power foundation. In short, it is time to delve into several possible scenarios I which the PRC poses a real threat. With this in mind, in Section Two the paper seeks to observe the construction progress of PRC's naval power and its future prospects up to the year 2020, and categorize time frame according to its major force improvement trends. By analyzing qualitative improvements made over time, such as the scale of investment and the number of ships compared to increase in displacement (tonnage), this paper attempts to identify salient features in the construction of naval power. Chapter Three sets out performance evaluation on each type of PRC naval ships as well as capabilities of the Navy, Air Force, the Second Artillery (i.e., strategic missile forces) and satellites that could support maritime warfare. Finall, the concluding chapter estimates the PRC's maritime warfighting capability as anticipated in respective conflict scenarios, and considers its impact on the Korean Peninsula and proposes the directions ROK should steer in response. First of all, since the 1980s the PRC navy has undergone transitions as the focus of its military strategic outlook shifted from ground warfare to maritime warfare, and within 30 years of its effort to construct naval power while greatly reducing the size of its ground forces, the PRC has succeeded in building its naval power next to the U.S.'s in the world in terms of number, with acquisition of an aircraft carrier, Chinese-version of the Aegis, submarines and so on. The PRC also enjoys great potentials to qualitatively develop its forces such as indigenous aircraft carriers, next-generation strategic submarines, next-generation destroyers and so forth, which is possible because the PRC has accumulated its independent production capabilities in the process of its 30-year-long efforts. Secondly, one could argue that ROK still has its chances of coping with the PRC in naval power since, despite its continuous efforts, many estimate that the PRC naval force is roughly ten or more years behind that of superpowers such as the U.S., on areas including radar detection capability, EW capability, C4I and data-link systems, doctrines on force employment as well as tactics, and such gap cannot be easily overcome. The most probable scenarios involving the PRC in sea areas surrounding the Korean Peninsula are: first, upon the outbreak of war in the peninsula, the PRC may pursue military intervention through sea, thereby undermining efforts of the ROK-U.S. combined operations; second, ROK-PRC or PRC-Japan conflicts over maritime jurisdiction or ownership over the Senkaku/Diaoyu islands could inflict damage to ROK territorial sovereignty or economic gains. The PRC would likely attempt to resolve the conflict employing blitzkrieg tactics before U.S. forces arrive on the scene, while at the same time delaying and denying access of the incoming U.S. forces. If this proves unattainable, the PRC could take a course of action adopting "long-term attrition warfare," thus weakening its enemy's sustainability. All in all, thiss paper makes three proposals on how the ROK should respond. First, modern warfare as well as the emergent future warfare demonstrates that the center stage of battle is no longer the domestic territory, but rather further away into the sea and space. In this respect, the ROKN should take advantage of the distinct feature of battle space on the peninsula, which is surrounded by the seas, and obtain capabilities to intercept more than 50 percent of the enemy's ballistic missiles, including those of North Korea. In tandem with this capacity, employment of a large scale of UAV/F Carrier for Kill Chain operations should enhance effectiveness. This is because conditions are more favorable to defend from sea, on matters concerning accuracy rates against enemy targets, minimized threat of friendly damage, and cost effectiveness. Second, to maintain readiness for a North Korean crisis where timely deployment of US forces is not possible, the ROKN ought to obtain capabilities to hold the enemy attack at bay while deterring PRC naval intervention. It is also argued that ROKN should strengthen its power so as to protect national interests in the seas surrounding the peninsula without support from the USN, should ROK-PRC or ROK-Japan conflict arise concerning maritime jurisprudence. Third, the ROK should fortify infrastructures for independent construction of naval power and expand its R&D efforts, and for this purpose, the ROK should make the most of the advantages stemming from the ROK-U.S. alliance inducing active support from the United States. The rationale behind this argument is that while it is strategically effective to rely on alliance or jump on the bandwagon, the ultimate goal is always to acquire an independent response capability as much as possible.