• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.789-792
• /
• 2008

Actually, The present traffic accident detection system is subsisting limitation of accurate distinction under the crowded condition at intersection because the system depend upon mainly the image information at intersection and digital image processing techniques nearly all. To complement this insufficiency, this article aims to estimate the level of present technology and a realistic possibility by analyzing the acoustic characteristic of crash sound that we have to investigate for improvement of traffic accident detection rate at intersection. The skid sound of traffic accident is showed the special pattern at $1[kHz]{\sim}3[kHz}$ bandwidth when vehicles are almost never operated in and around intersection. Also, the frequency bandwidth of vehicle crash sound is showed sound pressure difference over 30[dB] higher than when there is no occurrence of traffic accident below 500[Hz].

• Korean Journal of Health Education and Promotion
• /
• v.24 no.4
• /
• pp.181-200
• /
• 2007

Objectives: A content analysis was conducted to examine whether the current school textbooks providing smoking information are effective or not. Methods: The authors reviewed 111 qualified textbooks using elementary through high schools during 2006-2007 academic year in Korea. Educational components were coded with an analysis tool developed through the present research. Result: Tobacco education components were narrowly focused on long-term physiological consequences of tobacco use, addictiveness, and harmful ingredients and they were repetitively shown in the textbooks. Negative health consequences such as lung cancer were emphasized 10 times among 12 smoking-related textbooks. Educational messages or contents are mainly based on medical knowledge (72%) rather than psycho-social components. The US school-based smoking prevention programs, however, employ psycho-social approach with cognitive and life-skill components and they contain only 7-17% of smoking-related medical knowledge. In order to increase psycho-social smoking prevention components in Korean textbooks, the present study identified social subjects of textbooks (and relating core sessions) for elementary, middle, and high school. It also provided guidelines for school instructors to use. Conclusion: Adolescent smoking behavior is not caused by the deficit of health information, but mostly by social influences including media and peer pressure. School textbooks proving smoking information need to increase psycho-social context. One of the most effective ways as a psycho-social smoking prevention program is to use social subjects (or curriculum) of textbooks such as social studies, ethics, social cultures, social environment, and home management.

• Journal of Food Hygiene and Safety
• /
• v.18 no.1
• /
• pp.6-13
• /
• 2003

Various kinds of genetically modified organisms (GMO) and processed foods have been developed during recent years. Genetically modified organisms can be classified into several groups as their development methods. Generally, GMO has three foreign DNA regions such as gene expression adjustment region(Promoter), termination region (terminator) and structure gene. Detection of these regions can be done particularly by polymerase chain reaction (PCR). PCR-based detection can virtually be performed for any GMO within short of time. The most important prerequisite for the application of PCR-based detection is to decide abstraction method of efficient nucleic acids. Specially, in the case of processed food, because nucleic acids of foodstuffs are damaged by heat treatment (sterilization), pressure and fermentation, DNA must be extracted ken the samples prior to PCR analysis. Although many DNA extraction protocols are available, they have rarely been compared in a comprehensive method. In this study low widely used commercial and non-commercial DNA extraction methods-DNeasy$^{TM}$, Wizard$^{TM}$, CTAB, phenol/chloroform system-were compared with respect to the quality and yield of nucleic acids and insertion genes.nes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.514-517
• /
• 2003

Oxygen supply is one of the most basic things in human body. Breathing is controlled by the lungs' stationary function and the respiratory center which is in the mesulla oblongata. Nothing but, the external breathing that air movement between the lungs and atmosphere and the internal breathing that cellular air movement between the hemoglobin and a single cell. The adult's number of times of the respirations is about 15∼20 per 1 minute, but it depends ages, exercise, temperature, disease, etc. The important thing in detecting the respiration is that doing it in object person's resting time. Detecting the respiration have to be done without attracting any attention of object person. In present using method is detecting the pulse with catching an object person's wrist and observing the object person's movement. In this paper, we propose the mobile respiration detection diagnostic system using ultrasound sensing method that does not be influenced by the inertia error and the pressure error.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.2
• /
• pp.99-105
• /
• 2017

Many composite materials are used in the aerospace industry because of their excellent mechanical properties. However, the nature of aviation exposes these materials to high temperature and high moisture conditions depending on climate, location, and altitude. Therefore, the molecular arrangement chemical properties, and mechanical properties of composite materials can be changed under these conditions. As a result, surface disruptions and cracks can be created. Consequently, moisture-impregnating defects can be induced due to the crack and delamination of composite materials as they are repeatedly exposed to moisture absorption moisture release, fatigue environment, temperature changes, and fluid pressure changes. This study evaluates the possibility of detecting the moisture-impregnating defects of CFRP and GFRP honeycomb structure sandwich composite materials, which are the composite materials in the aircraft structure, by using an active infrared thermography technology among non-destructive testing methods. In all experiments, it was possible to distinguish the area and a number of CFRP composite materials more clearly than those of GFRP composite material. The highest detection rate was observed in the heating duration of 50 mHz and the low detection rate was at the heating duration of over 500 mHz. The reflection method showed a higher detection rate than the transmission method.

• Journal of the Korean Institute of Gas
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2009

A safety assessment was performed through the process analysis of hydrogen station. The purpose of this study provides basic information for the standard establishment about hydrogen stations. The processes of hydrogen stations were classified by four steps (process of manufacture, compression, storage, charge). FMEA (Failure Mode and Effect Analysis) method was applied to evaluate safety. Each risk element is following; S (severity), O (occurrence), D (detection). And the priority of order was decided by using RPN (Risk Priority Number) value multiplying three factors. Scenarios were generated based on FMEA results. And consequence analysis was practiced using PHAST program. In the result of C.A, jet fire and explosion were shown as accident types. In case of leakage of feed line in PSA process, concentration of CO gas is considered to prevent CO gas poisoning when the raw material that can product CO gas was used.

• Journal of Chest Surgery
• /
• v.28 no.6
• /
• pp.542-548
• /
• 1995

The goal of this study is to develop an effective control system for cardiac output regulation based upon the preload and afterload conditions without any transducers and compliance chambers in the moving actuator type total artificial heart. Motor current waveforms during the actuator movement are used as an input to the automatic control algorithm. While the current waveform analysis is performed, the stroke length and velocity of the actuator are gradually increased up to the maximum pump output level. If the diastolic filling rate of either right or left pump begins to exceed the venous return, atrial collapse will occur. Since the diastolic suction acts as a load to the motor, this critical condition can be detected by analyzing the motor current waveforms. Every time this detection criterion is met, the control algorithm decreases the stroke velocity and length of the actuator step by step just below the critical detection level. Then, they start to increase. In this way the maximum pump output under given venous return can be achieved. Additionally the control algorithm provides some degree of afterload sensitivity. If the aortic pressure is detected to exceed 120 mmHg, the stroke length and velocity decrease in the same way as the response to the preload. Left-right pump output balance is maintained by proper adjustment of the asymmetry of the stroke angle. In the mock circulatory test, this control system worked well and there was a considerable range of stroke volume difference with adjustment of the asymmetry value. Two ovine experiments were performed. It was confirmed that the required cardiac output regulation according to the venous return could be achieved with adequate detection of diastolic function, at least in the in vivo short-term survival cases[2-3 days . We conclude that this control algorithm is a promising method to regulate cardiac output in the moving actuator type total artificial heart.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.482-492
• /
• 2012

Objectives: The main purpose of this study is to produce background data which can be compared with data on vulnerable areas such as industrial complexes in Ulsan, SihwaBanwol, Gwangyang, Yeosu, Pohang, Cheongju and Daesan in Korea. Methods: This study was performed on 1,007 local residents in Gangneung using personal questionnaires and medical check-up. Environmental pollutants including heavy metals in blood and urine were analyzed and the results are as follows. Results: According to the results of medical check-up, 705 subjects were "Normal (A and B)", 232 subjects were "Disease doubtful (R1)" and 70 subjects were "High blood pressure or Diabetes doubtful (R2)". Regarding geometric mean concentration, blood lead was 1.57 ${\mu}g/dL$, urine cadmium was 0.82 ${\mu}g/g-cr$, urine mercury was 0.98 ${\mu}g/g-cr$ and urine arsenic was 15.78 ${\mu}g/g-cr$. In the analysis of 11 kinds of VOCs in blood, vinyl chloride, 1,3-butadiene and dichloroethylene were not detected, while the detection rate of other chemicals was above 70% except chloroform(49.7%) and trichloroethylene(19.0%). In analysis of 16 kinds of PAHs in blood, 10 kinds showed more than 80% in detection rate. Also, detection rate of 4 kinds of PCBs in blood ranged 52 to 78%. Conclusions: Compared with industrial compelxes, the concentration of blood lead was lower, while urine cadmium and mercury levels were similar. Also, urine arsenic ranged at a significant level. Further study is required to find the cause of regional differences in concentrations of environmental pollutants.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.224-229
• /
• 2020

We propose a machine learning-based method for proactively detecting faults in LDPE processes and predicting equipment lifespan. It is important to detect and prevent unexpected faults in chemical processes in order to maximize safety and productivity. Since LDPE process is a high-pressure process up to 3,000 kg/㎠g or more, once ESD occurs, it can result in productivity loss due to increased maintenance periods. By collecting key variables operation data of the process and using unsupervised machine leaning methods, we developed a fault detection model which detected 4 ESDs 2.4 days prior to the occurrence. In addition, it was confirmed that the life expectancy of a hyper compressor can be predicted by using the physically significant key variables.

• Tribology and Lubricants
• /
• v.30 no.2
• /
• pp.124-129
• /
• 2014

The piping system accounts for a large portion of the machinery structure of a plant, and is considered as a very important mechanical structure for plant safety. Accordingly, it is used in most energy plants in the nuclear, gas, and heavy chemical industries. In particular, the piping system for a nuclear plant is generally complicated and uses the reactor and its cooling system. The piping equipment is exposed to diverse loads such as weight, temperature, pressure, and seismic load from pipes and fluids, and is used to transfer steam, oil, and gas. In ultrasound infrared thermography, which is an active thermography technology, a 15-100 kHz ultrasound wave is applied to the subject, and the resulting heat from the defective parts is measured using a thermography camera. Because this technique can inspect a large area simultaneously and detect defects such as cracks and delamination in real time, it is used to detect defects in the new and renewable energy, car, and aerospace industries, and recently, in piping defect detection. In this study, ultrasound infrared thermography is used to detect information for the diagnosis of nuclear equipment and structures. Test specimens are prepared with piping materials for nuclear plants, and the optimally designed ultrasound horn and ultrasound vibration system is used to determine damages on nuclear plant piping and detect defects. Additionally, the detected images are used to improve the reliability of the surface and internal defect detection for nuclear piping materials, and their field applicability and reliability is verified.