• 센서학회지
• /
• 제26권3호
• /
• pp.186-191
• /
• 2017

In this study, we investigated the simultaneous detection properties of organic vapor, pressure difference, and magnetic field using a single rugate-structured free-standing porous silicon (RFPS) thin film. Both the wavelength and the intensity of the rugate peaks were changed in the reflectivity spectrum measured at the thin film surface while the organic vapor was exposed to the RFPS thin film. However, when the pressure difference and the magnetic field were exposed to the film, only the rugate peak intensity was changed. Therefore, it is possible to distinguish whether or not the organic vapor is detected by simultaneously changing the rugate peak wavelength and intensity. In addition, a method of distinguishing between the pressure difference and the magnetic field detection signal has been derived by rapidly modulating the direction of the magnetic field. This study shows that it is possible to simultaneously detect and distinguish various objects using a single RFPS thin film, and it is found that porous silicon can be utilized as a sensor sufficiently.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.139-147
• /
• 2020

This paper suggests a nonlinear pressure consideration scheme through an unsteady pipe network analyzer for leakage detection with a portable pressure wave generator. In order to evaluate the performance of a proposal scheme, linear input pattern has been simulated and experiments had been carried out under both no leakage and one leakage conditions in a reservoir-pipeline-valve system. This method using portable pressure wave generator showed that a leakage can be detected from a reflection where a leakage is originated through time domain analysis. Meaningful similarity in pressure response between nonlinear input pattern and experimental results were found both no leakage and a leakage conditions.

• 한국가스학회지
• /
• 제11권4호
• /
• pp.47-53
• /
• 2007

고압 가스 배관망의 안전관리는 매우 중요한 문제로 배관의 외적 손상으로 구멍이 생길 경우 발생하는 누출은 폭발 및 환경오염을 포함한 막대한 경제적 손실을 야기할 수 있다. 누출 검지를 위한 PLDS(Pipeline leak detection system린 기술로 저압확장파 검지 기술이 적용되고 있으며 본 논문에서는 CFD++ 상용코드를 활용하여 배관 누출시 유동특성을 이론적으로 해석하여 저압확장파의 발생 메커니즘과 음속으로 확장되는 전파특성을 규명하였다. 또한 긴 배관망에 적용하기 위한 1차원 해석 방법을 제시하고 신뢰성을 CFD해석 결과로 검증하였다.

• 상하수도학회지
• /
• 제27권5호
• /
• pp.611-619
• /
• 2013

In this study, Back Tracing Calculation Method was developed to determine the leakage location and leakage amount. Previously developed determination method of monitoring location and newly developed Back Tracing Calculation Method were applied to the sample pipe network and real size pilot plant. After leakage was assumed in the pilot plant, leakage location and leakage amount could be traced by Back Tracing Calculation Method. From the results, it was found that Back Tracing Calculation Method can be applied for the leakage detection in water distribution system. Furthermore, this method can be applied for the pressure management or leakage detection as a pressure control method in water distribution system.

• 한국군사과학기술학회지
• /
• 제17권2호
• /
• pp.258-264
• /
• 2014

In terms of chemical detection performance related with chemical material sampling, this investigation shows optimized values, resulted from minimizing loss from air turbulence and other reasons when pressure changes on the basis of sampling flow rate Based on simulations and pressure control of the outside conditions it became possible to obtain ion mobility detection optimum values, and to derive standard pressure conditions that is appropriate for DMS characteristic.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.88-94
• /
• 2007

This study deals with on-line fault detection and diagnosis for heat exchanger of variable speed refrigeration system. Conventional studies about fault of heat exchanger in refrigeration system have used temperature and pressure information. The temperature and pressure are able to be used valuably for faults detection of constant speed refrigeration system. However in case of variable speed refrigeration system, the temperature and pressure are no longer useful information for fault detection due to compensation effect of feedback controller. While current information is possible to detect faults of variable speed refrigeration system. The current information was detected in an inverter, it was used after transforming rms value. The faults of variable speed refrigeration system are divided into electrical faults and mechanical faults. We performed fault detection and diagnosis about heat exchanger among mechanical faults such as condenser fouling and evaporator fan fouling through some experiments.

• Nuclear Engineering and Technology
• /
• 제35권5호
• /
• pp.369-377
• /
• 2003

Since Zr-2.5Nb pressure tubes have a high risk for the formation of blisters during their operation in pressurized heavy water reactors, there has been a strong incentive to develop a method for the non-destructive detection of blisters grown on the tube surfaces. However, because there is little mismatch in acoustic impedance between the hydride blisters and zirconium matrix, it is not easy to distinguish the boundary between the blister and zirconium matrix with conventional ultrasonic methods. This study has focused on the development of a special ultrasonic method, so called ultrasonic velocity ratio method for a reliable detection of blisters formed on Zr-2.5Nb pressure tubes. Hydride blisters were grown on the outer surface of the Zr-2.5Nb pressure tube using a cold finger attached to a steady state thermal diffusion equipment. To maximize a difference in the ultrasonic velocity in hydride blisters and the zirconium matrix, the ultrasonic velocity ratio of longitudinal wave to shear wave, $V_L/V_S$, has been determined based on the flight time of the longitudinal echo and reflected shear echo from the outer surface of the tubes. The feasibility of the ultrasonic velocity ratio method is confirmed by comparing the contour plots reproduced by this method with those of the blisters grown on the Zr-2.5Nb pressure tubes.

• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.271-280
• /
• 2004

Assessment of image registration for Pressure Sensitive Paint (PSP) was performed. A 16 bit camera and LED lamp were used with Uni-FIB paint (ISSI). Because of model displacement and deformation at 'wind-on' condition, a large error of the intensity ratio was induced between 'wind-on' and' wind-off images. To correct the error, many kinds of image registrations were tested. At first, control points were marked on the model surface to find the coefficients of polynomial transform functions between the 'wind-off' 'wind-on' images. The 2nd-order polynomial function was sufficient for representing the model displacement and deformation. An automatic detection scheme was introduced to find the exact coordinates of the control points. The present automatic detection algorithm showed more accurate and user-friendly than the manual detection algorithm. Since the coordinates of transformed pixel were not integer, five interpolation methods were applied to get the exact pixel intensity after transforming the 'wind-on' image. Among these methods, the cubic convolution interpolation scheme gave the best result.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권5호
• /
• pp.662-673
• /
• 2012

This study introduces a condition diagnosis technique for a turbine governor system. The governor system is an important control system to handle turbine speed in a nuclear power plant. The turbine governor system includes turbine valves and stop valves which have their own functions in the system. Because a turbine governor system is operated by high oil pressure, it is very difficult to maintain under stable operating conditions. Turbine valves supply oil pressure to the governor system for proper operation. Using the pressure variation of turbine and governor valves, operating conditions of the turbine governor control system are detected and identified. To achieve automatic detection of valve status, time-based and frequency-based analysis is employed. In this study, a new approach, wavelet decomposition, was used to extract specific features from the pressure signals of the governor and stop valves. The extracted features, which represent the operating conditions of the turbine governor system, include important information to control and diagnose the valves. After extracting the specific features, decision rules were used to classify the valve conditions. The rules were generated by a decision tree algorithm (a typical simple method for data-based rule generation). The results given by the wavelet-based analysis were compared to detection results using time- and frequency-based approaches. Compared with the several related studies, the wavelet transform-based analysis, the proposed in this study has the advantage of easier application without auxiliary features.

• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1299-1307
• /
• 2014

본 논문은 감도가 낮고 정밀한 족적센서의 특성에 대하여 연구한 논문이다. 이를 위하여 센서의 형상 변수 조절 범위를 낮게 선정하였다. 센서의 감도 해석으로 2차원 해석 모델을 사용할 경우 실험값과 비교한 결과 오차가 많이 나는 것을 확인하였다. 따라서 이 오차를 개선하기 위하여 3D 기반의 새로운 해석 모델을 적용시켜 재해석 하였고, 이를 실험값과 비교한 결과 오차가 개선되었음을 확인할 수 있었다.