• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.809-817
• /
• 2008

This paper describes an obstacle detecting system of an unmanned ground vehicle (UGV). The unmanned ground vehicle is consists of several systems such as vehicle control system, navigation system, obstacle detecting system and integration system. Among these systems, the obstacle detecting system is a driving assistance system of UGV. Through the UGV is driving, the system detects obstacles such as cars, human, tree, curb and hills and then send information of obstacles position to integration system for safety driving. In this research, the obstacle detecting system is composed of 5 laser scanners and develop algorithms of detecting obstacles, curb, uphill and downhill road.

• 대한임베디드공학회논문지
• /
• 제8권3호
• /
• pp.155-161
• /
• 2013

To reduce the personnel and material loss caused by fire, we propose the automatic fire extinguishing system based on the ignition point tracking using the flame detecter. This automatic fire extinguishing system is composed of the flame detecting system and the fire extinguishing system based on the water cannon. We study the method for the ignition point tracking and the automatic fire extinguishing using the water cannon and the flame detecter. The flame detecting system for the early fire detection and the ignition point tracking has to be satisfied the requirement of the detecting range and the flame detection time. So we study the signal process algorithm for an improvement of the flame detecting system.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1813-1819
• /
• 2013

Existing level crossing obstacle detecting system was installed using a laser beam. Level crossing obstacle detecting system using a laser beam that has been a problem in relation to safety and maintainability failure according to weather conditions. We proposed laser radar level crossing obstacle detecting system as a way to overcome problem, and we developed an algorithm for this. Level crossing obstacle detecting system using a laser radar sensor algorithm is robust to external environment and a shadow zone does not exist. Sensor part of the laser radar level crossing obstacle detecting system of these is made up by the image processing unit and laser radar sensor, it operations by receiving train entering information from the control unit. In this paper, we proposed a detecting algorithm with calculation of the size of the laser radar sensor. Based on this, we were performance test on the basis of the scenario by making a prototype. In the future, laser radar level crossing obstacle detecting system to ensure the safety and reliability through the field test.

• 한국정밀공학회지
• /
• 제34권3호
• /
• pp.179-184
• /
• 2017

Recently, traffic accidents and damage on the highway have increased because of overloaded vehicles. The existing overload-detecting system has a low accuracy rate. An overload-detecting system using a weigh-in-motion (WIM) system has been developed to solve this problem. The WIM system can be used to detect overloaded vehicles by measuring the weight of the vehicles. The WIM system is divided into high-speed and low-speed types. The inaccuracy rate in the low-speed WIM system results mainly from the low response rate of the sensor when the velocity is moving at more than 20 km/h. In this study, a low-speed overload-detecting pad with a hydraulic structure using a WIM system was developed to make the system more accurate. The structural and formal analysis was carried out by using a finite element method (FEM) in order to analyze the structural stability and the extrusion velocity of the system. In addition, a static load test was performed to confirm the linearity and accuracy of the pad.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.41-49
• /
• 2007

In this paper, we proposed a new ultrasonic distance measurement system with high accuracy and long range. To improve accuracy and enlarge range, the time of flight of ultrasonic is calculated by the period detecting method. In the proposed ultrasonic distance measurement system, the ultrasonic transmitter and receiver are separated but synchronized by RF(Radio frequency) module. The experiment has been implemented from short distance 1m to maximum available distance 30m. And the period detecting method is compared with the conventional threshold level method. Experimental results show the accuracy and range of the distance measurement are improved by this period detecting method.

• 한국통신학회논문지
• /
• 제39C권3호
• /
• pp.307-315
• /
• 2014

기존의 건널목 지장물 검지장치는 선검지 방식으로 지장물을 검지하지 못하는 구간이 발생하며, 분산적인 기기설치로 인해 유지보수 비용 및 안전성 측면에서 문제가 되고 있다. 따라서 이러한 지장물 검지장치의 문제점을 해결하기 위해 레이저레이더 센서를 이용한 건널목 지장물 검지장치가 개발되었다. 본 논문에서는 개발된 레이저레이더 센서를 이용한 건널목 지장물 검지장치의 기능시험을 수행한 결과에 대해 설명하고 있다. 기능시험은 지장물 검지에 따른 센서부와 제어부의 정상작동 시험과 센서부와 제어부에 고장 발생 시 고장정보를 표시하는 시험으로 구성하여 수행하였다. 수행된 기능시험을 통해 레이저레이더 센서를 이용한 건널목 지장물 검지장치의 기능들이 모두 정상동작하는 것을 확인하였다.

• 한국광학회지
• /
• 제12권2호
• /
• pp.103-108
• /
• 2001

플라즈마 디스플레이 패널(plasma display panel :PDP)에서 방출되는 광의 3차원 분포를 측정하기 위한 scanned point-detecting system(SPDS)을 고안하여 제작하였으며 이 시스템을 이용하여 실제 PDP의 3차원 광 방출 특성을 측정하고 해석하였다. SPDS는 상면에 핀홀이 달려 있는 광검출기(point detector)를 위치시킴으로써 특정 지점으로부터 방출되는 광만을 검출할수 있다. 3차원 물체의 특정 지점으로부터 방출된 광은 핀홀을 지나 검출기로 모두 입사되지만 다른 지점으로부터 방출된 광은 핀홀 앞에서 미리 집속되거나 핀홀 뒤에서 집속될것이므로 이러한 광들은 핀홀에 의해 대부분 차단될 것이다. 그러므로 물체의 특정 지점으로부터 방출된 광만이 핀홀이 설치된 검출기에 의해 검출되어 진다. SPDS를 이용하여 PDP cell 내에서 측정된 3차원 광 intensity 분포로부터 cellso의 방전현상을 다음과 같이 유추해낼수 있었다. Z축 측정이 진행될수록광의 intensity는 증가하였고 ITO전극의 안쪽부분에서 검출되는 광의 intensity가 가장 컸고 Y축 scan시 나타나는 X-Z평면에서 광의 intensity가 격벽과 격벽의 중심부분에서 가장 크게 나타났다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.54-60
• /
• 2001

A newly designed inductive micro displacement detecting system is presented. The proposed inductive system consists of driving coils, position-detecting coils, cores, and closed-loop formed magnetic blocks. The cores and magnetic blocks are made of Mn-Zn ferrite. When AC sine wave is applied to the driving coils, the time derivative flux is generated within the system, and then induced voltages arise in the position-detecting coils according to the core\`s position. Putting the cores to be moved proportionally to the input displacement, the induced voltage is proportional to input displacement. The parameters that affect the system characteristics are turn ratio, air-gap size, excitation frequency, overlap area, load resistance, capacitance effect, and so forth. Based on the experimental results, the system parameters are selected in such a way as to have high sensitivity ad stable responses. The sensitivity of the proposed inductive displacement-detecting system is greater than 2800mV.V-1mm-1 and the linearity error is below $\pm$0.10% in the range of $\pm$200㎛.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.81-84
• /
• 1998

In this paper, we implemented this failure detecting and monitoring system for high-pressure natrium lamps and ballasts. The hall CTs of the local detecting system measure the current flowing into natrium lamps via ballasts and acertain whether the natrium lamps or ballasts are out of order or not. These test data are transmitted to the main monitoring system. So, we can see the status of the natrium lamps or ballasts promptly.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 1996

A new detecting system for moving objects of coastal region has been designed by directional antenna and driving circuits. The designed system has been investigated by CAD for linear and planar antenna arrays of various radiating elements for antenna simulations and by P-spice of device simulations. For detecting the displacement of moving objects, we constructed four wideband dipole antenna, diode switching circuit, mixer, filter and amplifier. The results of antenna receiver were shown a possibility of distance measuring system through phase difference of radiation patterns in antenna simulation